User Manual For InVision 4K Media Player
1. Specifications: Dimension: 219.5X154.3X41.6mm Input port: 1pc 5.5mm female barrel jack - for +12V power input 1pc SD Card Slot - for SD 1pc DTCN-A-4F 4-pin connector for UART device connection 2pcs USB-A standard USB receptacle Output port: 1pcs Antenna connector for 2.4G + 5G WiFi network 1pc 3.
Adapter: Input 100-240VAC 50-60Hz 0.5A, Output 12VDC 1.5A Operation Description: The unit can has utilized several different applications that will allow several different functions depending on the modules connected to the device. Modified Android OS OS will be 3-tiered Application Level - In the application a preset application will play constantly. A standard level user will not be able to access any level other than the application level.
This will display a list of the applications currently installed on the unit. Each application will have a checkbox to the right side of the screen, this will allow the user to select the default application that plays on the application level. Checking one application will uncheck the previously selected application. Install New Application This option will allow the user to install a new application on to the unit. From this location, the user will be able to select the application (.
the internal memory, overwriting the content that is currently stored there. If the user selects no, the unit will return to the Update/Replace Media Content option. Network Settings This option is the same as the current network setup options on the unit, it will allow the user to search for a wireless network, enter a password, select the encryption type, etc... Date/Time This option will allow the user to manually set the current date/time if necessary.
update date, etc... FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.