6189S-SF Wi-Fi Single-band 1X1 802.
6189S-SF Module Datasheet Office: 6 Floor, Building U6, Junxiang U8 Park, Hangcheng Avenue, Bao'an District, Shenzhen City, CHINA Factory: No.8, Litong Road, Liuyang Economic & Technical Development Zone, Changsha, Hunan, CHINA TEL: +86-755-2955-8186 Website: www.fn-link.
6189S-SF Revision History Version Date Revision Content Draft Approved 1.
6189S-SF CONTENTS 1 Overview....................................................................................................................................1 1.1 Introduction......................................................................................................................... 1 1.2 Features.............................................................................................................................. 1 1.3 General Specification...........................................
6189S-SF 1 Overview 1.1 Introduction 6189S-SF is a highly integrated and excellent performance Wireless LAN (WLAN) SDIO network interface device. High-speed wireless connection up to 150 Mbps. It can be easily manufactured on SMT process. This WLAN Module design is based on Realtek RTL8189FTV-VC-CG. It is a highly integrated single-chip Wireless LAN (WLAN) SDIO network interface controller complying with the 802.11n specification. It combines a MAC, a 1T1R capable baseband, and RF in a single chip.
189S-SF 1.3 General Specification Model Name 6189S-SF Product Description Support Wi-Fi functionalities Dimension L x W x T: 18.2 x 14.8 x 2.2 mm (typical) Wi-Fi Interface Support SDIO Operating temperature 0°C to 70°C Storage temperature -40°C to +85°C 1.4 Recommended Operating Rating Min. Typ. Max. Unit 0 25 70 VBAT 3.0 3.3 3.6 deg.C V VDDIO 1.7 1.8 or 3.3 3.6 V Operating Temperature ※1.5 EEPROM Information WI-FI Vendor ID 024C Product ID F179 2 General Specification 2.
6189S-SF 22MHZ) Freq. Tolerance Output Power Test Items -20/-20/-20 - 20/20/20 ppm 802.11b /11Mbps : 13 dBm ± 1.5 dB @ EVM ≤-9dB 802.11g /54Mbps : 13 dBm ± 1.5 dB @ EVM ≤-25dB 802.11n /MCS7(HT 20) : 13 dBm ± 1.5 dB @ EVM -28dB 802.11n /MCS7(HT 40) : 13 dBm ± 1.
6189S-SF 3 Pin Assignments 3.1 Pin Outline GND 1 19 GND GND 2 18 GND GND 3 17 GND SD_D3 13 14 15 16 GND SD_D2 12 SD_D1 11 SD_D0 10 SD_CLK 9 SD_CMD 8 WL_WAKE_HOST NC 7 CHIP_EN VBAT 6 GND 5 VDDIO 4 3.2 Pin Definition NO. Name Type 1 GND Ground connections 2 GND Ground connections 3 GND Ground connections 4 VBAT 5 NC 6 VDDIO FN-LINK TECHNOLOGY LIMITED Description P Supply 3.3V Voltage 3.
6189S-SF 3.3V 7 GND Ground connections 8 CHIP_EN I Wi-Fi enable pin, default pull high 3.3V 9 WL_WAKE_HOST I/O WLAN to wake-up HOST 1.8V ~ 3.3V 10 SD_D2 I/O SDIO Data line 2 1.8V ~ 3.3V 11 SD_D3 I/O SDIO Data line 3 1.8V ~ 3.3V 12 SD_CMD I/O SDIO Command Input 1.8V ~ 3.3V 13 SD_CLK I SDIO Clock Input 1.8V ~ 3.3V 14 SD_D0 I/O SDIO Data line 0 1.8V ~ 3.3V 15 SD_D1 I/O SDIO Data line 1 1.8V ~ 3.
6189S-SF 4.2 Marking Description 4.
6189S-SF 4.
6189S-SF 6 Host Interface Timing Diagram 6.1 SDIO Pin Description The module supports SDIO version 2.0 for all 1.8V 4-bit UHSI speeds: SDR12(25 Mbps), and SDR25(50Mbps) in addition to the 3.3V default speed(25MHz) and high speed (50 MHz).
6189S-SF 6.2 SDIO Default Mode Timing Diagram 6.3 SDIO Power-on sequence Symbol Min Typical Max Unit T33ramp 0.2 - No Limit ms Toff 250 500 1000 ms T33ramp 0.2 0.5 2.5 ms T12ramp 0.1 0.5 1.
6189S-SF 7 Reference Design Note: 1. chip_EN could not use for module power off, please switch the 3.3V power for module on/off. 2. please keep the antenna on no metal area.
6189S-SF 8 Ordering Information Part No. Description FG6189SSFX-00 RTL8189FTV-VC-CG b/g/n, Wi-Fi, 1T1R, 18.2X14.8mm, SDIO, PCB V1.0 with antenna 9 The Key Material List Shielding cover 6189S-SF V1.0 Shielding cover 信太,精力通 Crystal 3225,26Mhz ECEC,HOSONIC,TKD,JWT ESD 0201 0.05pF 15KV TVS Murata,Sunlord Chipset RTL8189FTV-VC-CG Realtek PCB 6189S-SF-V1.0 Green,18.2x14.8x0.8mm XY-PCB,KX-PCB,Sunlord ±10ppm,10.5pF 10 Environmental Requirements 10.
10.2 Patch Wi-Fi modules installed before the notice 6189S-SF Wi-Fi module installed note: 1. Please press 1 : 1 and then expand outward proportion to 0.7 mm, 0.12 mm thickness When open a stencil. 2. Take and use the WIFI module, please insure the electrostatic protective measures. 3. Reflow soldering temperature should be according to the customer the main size of the products, such as the temperature set at 250 + 5 ℃ for the MID motherboard.
6189S-SF 11 Package 11.1 Reel A roll of 1000pcs 11.2 Packaging Detail the take-up package Using self-adhesive tape Size of black tape:32mm*20.8m the cover tape :25.
6189S-SF NY bag size:415mm*450mm size :350*350*35mm The packing case size:360*210*370mm FN-LINK TECHNOLOGY LIMITED 14 Proprietary & Confidential Information
6189S-SF 11.3 Carrier Tape Detail 11.4 Moisture sensitivity The Modules is a Moisture Sensitive Device level 3, in according with standard IPC/JEDEC J-STD-020, take care all the relatives requirements for using this kind of components.
FCC Statement FCC standards: FCC CFR Title 47 Part 15 Subpart C Section 15.247 Integral antenna with antenna gain 2dBi This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
—Reorient or relocate the receiving antenna. —Increase the separation between the equipment and receiver. —Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. —Consult the dealer or an experienced radio/TV technician for help. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.