HDR_650_Manual_531874-2EN_A.qxp:531440-2_A - HDR 610 IG.
HDR_650_Manual_531874-2EN_A.qxp:531440-2_A - HDR 610 IG.qxd 8/27/15 3:02 Thank You! Tab Thank you for choosing Humminbird®, America's #1 name in fishfinders. Humminbird has built its reputation by designing and manufacturing top-quality, thoroughly reliable marine equipment. How Your Humminbird is designed for trouble-free use in even the harshest marine environment. In the unlikely event that your Humminbird does require repairs, we offer an exclusive Service Policy.
HDR_650_Manual_531874-2EN_A.qxp:531440-2_A - HDR 610 IG.qxd 8/27/15 Table of Contents ers. ring How Sonar Works 1 Installation Overview 2 rine airs, rate Installing the HDR 650 .................................................................................................... 3 site 4. Installing the HDR 650 .......................................................................................... 6 1. Locating the HRD 650 Mounting Position ......................................................
HDR_650_Manual_531874-2EN_A.qxp:531440-2_A - HDR 610 IG.qxd 8/27/15 Table of Contents 3:02 Ho No Bottom Reading on the Display .............................................................................. 18 No Continuous Depth Display in Very Shallow Water ................................................ 18 Screen Fades, Images are not Sharp............................................................................ 18 Bottom Reading Disappears During a Hard Turn .....................................
HDR_650_Manual_531874-2EN_A.qxp:531440-2_A - HDR 610 IG.qxd 8/27/15 How Sonar Works . 18 . 18 . 18 . 18 19 22 Sonar technology is based on sound waves. The HDR 650 Digital Depth Sounder uses sonar to determine depth directly below the transducer. Your HDR 650 Digital Depth Sounder consists of two components: the HDR 650 sonar unit and the transducer. The sonar unit contains the transmitter and receiver, as well as the user controls and display.
HDR_650_Manual_531874-2EN_A.qxp:531440-2_A - HDR 610 IG.qxd 8/27/15 3:02 Installation Overview Ins Before you start installation, we encourage you to read these instructions carefully in order to get the full benefit from your HDR 650 Digital Depth Sounder.
HDR_650_Manual_531874-2EN_A.qxp:531440-2_A - HDR 610 IG.qxd 8/27/15 Installing the HDR 650 ions der. also your You will install your HDR 650 depth sounder first, then your transducer. When you are done with both of these installation tasks, you should perform a final installation test before operating your HDR 650. Perform the following high-level steps by following the instructions in each numbered section to install the depth sounder: 1. Locating the HRD 650 mounting position 2.
HDR_650_Manual_531874-2EN_A.qxp:531440-2_A - HDR 610 IG.qxd 8/27/15 3:02 1. Locating the HDR 650 Mounting Position 3. C You must select an appropriate mounting location for the HDR 650. Consider different positions on the console or deck of the boat, and note the following: Your cust • The cables for the transducer and power must reach the mounting location. Extension cables are available. 1.
HDR_650_Manual_531874-2EN_A.qxp:531440-2_A - HDR 610 IG.qxd 8/27/15 3. Customizing and Assembling the HDR 650 ider g: tion. ately tion. for Your HDR 650 includes a variety of face plates and trim rings so you can customize the appearance. 1. Select one face plate and one trim ring. 2. Peel off the protective backing from the face plate. Be careful not to let the adhesive touch anything prematurely.
HDR_650_Manual_531874-2EN_A.qxp:531440-2_A - HDR 610 IG.qxd 8/27/15 4. Installing the HDR 650 3:02 5. I After the mounting hole has been cut (see section 2), continue the installation as follows: 1. 1. Remove the gasket and collar by unscrewing them from the HDR. 2. Insert the HDR through the front hole of the dashboard. 3. From the rear of the dashboard, install the gasket and collar onto the HDR. Attaching the Gasket and Collar 6.
n as HDR_650_Manual_531874-2EN_A.qxp:531440-2_A - HDR 610 IG.qxd 8/27/15 5. Installing the Buzzer 1. Secure the buzzer to a nearby wire bundle using the cable ties (included). Securing the Buzzer Buzzer HDR. 6. Connecting to the Power Supply Use the following information to connect your HDR 650 to an appropriate power supply: • If your boat has an electrical system, there is probably a fuse panel in the console area that can be used to attach the HDR 650 power cable.
HDR_650_Manual_531874-2EN_A.qxp:531440-2_A - HDR 610 IG.qxd 8/27/15 3:02 8. C POSITIVE 1. GROUND 9. T Inline Fuse Holder CAUTION: Some boats have 24 or 36 Volt electrical systems. Make sure that your HDR 650 is connected to a 12 VDC power supply. Use a voltage conditioner for variable inputs. NOTE: Humminbird is not responsible for over-voltage or over-current failures. The control head must have adequate protection through the proper selection and installation of a 1 amp fuse. 1a.
ur or he nd rs e r. t. s. HDR_650_Manual_531874-2EN_A.qxp:531440-2_A - HDR 610 IG.qxd 8/27/15 8. Connecting the Transducer Cable 1. Plug the transducer cable into the matching connector cable on the HDR. NOTE: The connector is keyed to prevent reverse installation, so be careful not to force the plug into the connector the wrong way. 9.
HDR_650_Manual_531874-2EN_A.qxp:531440-2_A - HDR 610 IG.qxd 8/27/15 3:02 Operating the HDR 650 Po Your HDR 650 Digital Depth Sounder sends a sound wave signal and determines distance by measuring the time between the transmission of the sound wave and when the sound wave is reflected off of an object. As your HDR 650 transducer receives sonar signals, it converts them to a digital depth that is shown on the HDR 650 display. The depth reading is continuously updated as you travel across the water.
ines and ucer the ross ght, er in ntrol play. HDR_650_Manual_531874-2EN_A.qxp:531440-2_A - HDR 610 IG.qxd 8/31/15 Power On/Off The power is controlled by the power source connected to the HDR 650. When the power source is turned on, the HDR 650 is powered on. When the power source is turned off, the HDR 650 is powered off. Key Functions Overview 1. Select a Function: Press the MENU key repeatedly until you reach the appropriate menu. 2.
HDR_650_Manual_531874-2EN_A.qxp:531440-2_A - HDR 610 IG.qxd 8/27/15 3:02 Units Sh The Units control function selects the units of measure for depth readout and alarm functions. You can set the units of measurement to feet, meters, or fathoms. The 1. Set Units 1. Press the MENU key until the Units icon is displayed and flashing on the screen. 2. 2. Press the UP or DOWN arrow key to scroll through the available units. (FT = feet, M = meters, FA = fathoms). 3.
HDR_650_Manual_531874-2EN_A.qxp:531440-2_A - HDR 610 IG.qxd 8/27/15 Shallow Alarm dout ters, The Shallow Alarm will sound when the measured depth is less than the setting. 1. Press the MENU key until the Shallow Alarm icon is displayed and flashing on the screen. Set Shallow Alarm Icon the nits. rmal 2. Press the UP or DOWN arrow key to change the setting. (Off, 1 - 20 feet, .1 - 6 meters, or .1 - 3.
HDR_650_Manual_531874-2EN_A.qxp:531440-2_A - HDR 610 IG.qxd 8/27/15 3:02 Deep Alarm Se The Deep Alarm will sound when the measured depth is greater than the setting. The read tran 1. Press the MENU key until the Deep Alarm icon is displayed and flashing on the screen. 1. Set Deep Alarm Icon 2. Press the UP or DOWN arrow key to change the setting. (Off, 20 - 99 feet, 6 - 30 meters, or 3.3 - 16 fathoms; Default = Off) 2. 3.
HDR_650_Manual_531874-2EN_A.qxp:531440-2_A - HDR 610 IG.qxd 8/27/15 Set Offset (waterline or keel) ting. g on The Set Offset function adjusts the digital depth readout to display depth readings from the waterline or the keel (lowest point of the boat) instead of the transducer location. 1. Choose to measure the depth from the keel or waterline. Keel: Measure the vertical distance between the face of the transducer and the keel of the boat.
HDR_650_Manual_531874-2EN_A.qxp:531440-2_A - HDR 610 IG.qxd 8/27/15 3:02 Maintenance Tro To keep both your HDR 650 and your transducer working properly, perform the following maintenance tasks as needed. Befo sect you unit HDR 650 Maintenance If your HDR 650 unit comes into contact with salt spray, simply wipe the affected surfaces with a cloth dampened in fresh water. Do not use a chemical glass cleaner on the lens, as chemicals in the solution may cause cracking in the lens.
HDR_650_Manual_531874-2EN_A.qxp:531440-2_A - HDR 610 IG.qxd 8/27/15 Troubleshooting the Before contacting Humminbird Customer Service, please read the following section. Taking the time to review these troubleshooting guidelines may allow you to solve a performance problem yourself, and therefore avoid sending your unit back for repair. cted lass ens.
HDR_650_Manual_531874-2EN_A.qxp:531440-2_A - HDR 610 IG.
HDR_650_Manual_531874-2EN_A.qxp:531440-2_A - HDR 610 IG.qxd 8/27/15 Specifications sible Depth Capability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .600 ft (180 m) en a tion Power Cable Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36" (91 cm) and d, as ually Operating Frequency . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .200 kHz Area of Coverage . . . . . . . . . . . . . . . . . . . . . . . . . .
HDR_650_Manual_531874-2EN_A.qxp:531440-2_A - HDR 610 IG.qxd ENVIRONMENTAL COMPLIANCE STATEMENT: It is the intention of Johnson Outdoors Marine Electronics, Inc. to be a responsible corporate citizen, operating in compliance with known and applicable environmental regulations, and a good neighbor in the communities where we make or sell our products.
on in od HDR_650_Manual_531874-2EN_A.qxp:531440-2_A - HDR 610 IG.
HDR_650_Manual_531874-2EN_A.qxp:531440-2_A - HDR 610 IG.qxd Contact Humminbird Contact Humminbird Customer Service in any of the following ways: Web site: humminbird.com E-mail: service@humminbird.com Telephone: 1-800-633-1468 Direct Shipping: Humminbird Service Department 678 Humminbird Lane Eufaula, AL 36027 USA Hours of Operation: Monday - Friday 8:00 a.m. to 4:30 p.m.