HD Digital Receiver Quick Start Guide Spectrum101-H/ Spectrum201-H
Notice Notice Warranty Please read this quick start guide carefully to be able to safely install, use and maintain the product at maximum performance. Keep this quick start guide next to your product for future reference. The information in this quick start guide is subject to change without notice. Copyright Not to be copied, used or translated in part or whole without Charter Communications prior consent in writing except approval of ownership of copyright and copyright law.
For Your Safety For Your Safety Safety Instructions 1. POWER SUPPLY • Operate this product only from the type of power supply shown on the marking label. If you do not know the type of power supplied to your home, contact your local power company. • Disconnect the power supply before you start any maintenance or installation procedures. 2. OVERLOADING • Make sure that the wall outlet, extension cord and adapter have a sufficient power rating for the appliance. If not, this can cause an electric fire shock.
Safety Important Safety Instructions FCC CUSTOMER INFORMATION 1. 2. 3. 4. 5. 6. 7. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operations. Read these instruction. Keep these instruction. Heed all warnings. Follow all instructions.
Quick Start Guide Front Rear Note: The image may differ from the actual product. Note: The image may differ from the actual product. 1 2 3 1 4 5 1. Power: Switches between operation and standby modes. 2. Navigation: Moves the cursor up, down, left or right. Selects a menu or confirms a selection. 3. Menu: Displays the navigation keys on the front panel. 4. USB: Connect a USB storage device (5V 500mA). 5. Reset: Restart the product.
Quick Start Guide Connections This section describes how to connect your product to match your particular devices and to gain optimum signal quality. Warning: Connect all devices before you plug any power cords into the wall outlet. Always turn off the product, TV and other devices before you connect or disconnect any cables.
Quick Start Guide Connecting the Antenna Connect a coaxial cable to the Cable In. Connecting the TV Using an HDMI cable For the best picture quality, use an HDMI cable to connect to the TV. Using an RCA cable Using an RCA cable provides a lower resolution because the HD signal cannot be transmitted. Note: Use an S/PDIF cable to connect to the audio system for digital audio. Connecting the Network Connecting to the LAN Use the Ethernet cable to connect the product and the router.
