Quick Start Guide Model : H3
What’s in the box? H3 Remote Control / Batteries Quick Start Guide AC Adaptor Quick start Guide Note: Accessories may vary according to area.
Getting to Know Your H3 1 2 3 4 5 1 3 4 5 6 6 2 1. 2. 3. 4. USB Port: Connect your USB storage device. Status: Light is emitted when your H3 is in the operation mode. HDMI: Use an HDMI cable to connect to your TV. ETHERNET: Use an Ethernet cable to connect to a wired network. You can also use a wireless network. 5. SPDIF: Use an SPDIF cable to connect to the audio system. 6. DC IN: Use an AC adaptor to connect to the power source.
Getting to Know Your Remote Control 1. POWER: Powers on or off 2. ARROW: Moves the cursor up, down, left or right 3. COLOUR: For interactive applications 4. Back: Returns to the previous screen 5. Playback Controls: Rewind, /ΙΙ Play or pause, Forward 6. Volume: Changes the audio volume 7. HOME: Returns to the home screen 3 4 5 8. OK: Selects a menu or6confirms the option 9.
Inserting batteries Insert the batteries matching the plus(+) and minus(-) at each end.
Connecting Your H3 TV 1 HDMI 2 Ethernet Router 3 1. Connecting to your TV Use an HDMI cable (not supplied) to connect to your TV. 2. Connecting to Internet Use an Ethernet cable (not supplied) to connect to your router. Note: Wireless network can be connected. 3. Powering On Use an AC adaptor to DC IN of your H3, and then plug it into a wall outlet.
Setting Up Your H3 When you power on your H3 for the first time, follow the instructions to set it up. 1. Language Select your language. 2. Network Connection Your H3 will automatically detect your wired network connection. If your H3 fails to connect to the network, follow the on-screen instructions to set up the wireless network. Select your network from the network list and enter your network password. Network passwords are case sensitive.
Getting Your HUMAX Cast You can use your mobile phone as a remote control from anywhere in your home. 1. Go to Google Play or App Store to download HUMAX Cast. 2. Search by keyword HUMAX. 3. Download and install the HUMAX Cast on your mobile phone. Android iOS Pairing with your H3 Make sure that your H3 and mobile phone should be connected to the same network. When you install the HUMAX Cast for the first time, your mobile phone scans your H3. The PIN code appears on your TV.
Troubleshooting Before contacting your local service center, read the tips below carefully. If the problem persists after completing the following procedure, contact your local product distributor or service center for further instructions. Power H3 does not power on. • Check the AC power adaptor and make sure it is plugged in to a wall outlet. • Check your batteries in your remote control. Picture No or poor picture • Make sure your H3 is powered on and in operation mode.
Remote Control Remote control does not work. • Check new batteries are properly inserted in the remote control. • Remove and reinsert the batteries in the remote control. HUMAX Cast does not work. • Check your mobile phone and H3 are connected to the same network. • Check your HUMAX Cast is paired with your H3. • Check the Ethernet cable is connected to the wireless router. • Avoid metal, brick wall or concrete obstructions between your H3 and the wireless router. Network Wired network is not connected.
Specification • • • • • • Power Type: External Adaptor Input Voltage: 100V – 240V ~ 0.9A, 50/60Hz Power Consumption: 12V 1.
Safety Instructions Read the safety instructions before using your product to avoid electrical shock or personal injury. • Do not bend or twist the power cord to avoid damage of the power cord. • Do not touch the power plug with wet hands to avoid electrical shock. • Do not install near any heat sources such as radiators, het registers, stoves or other apparatus that produce heat. • Do not place naked flame sources, such as lighted candles, on or near the apparatus.
FCC CUSTOMER INFORMATION This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operations. FCC RF Radiation Exposure Statement This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
Warranty Certificate IMPORTANT: Keep this Certificate together with the Original invoice or receipt in a safe place and show them to the retailer or place of purchase whenever a warranty repair is necessary. • Model No.: • Serial No.: • Date of Purchase: • Dealer’s Signature: • Customer’s Signature: HUMAX thanks you for your recent HUMAX product purchase.
• CONDITIONS 1. The HUMAX warranty is valid for a period of one (1) year or a longer period depending on applicable local law from the date of first purchase. 2. In the event that this product fails to function properly during the warranty period, the retailer or distributor will make this product capable of operating for the purpose of which it was designed, without charging for labour and parts. 3.