Black plate (161,1) User’s Manual (AGC-3220YF) 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. MUTE button FM·AM band select button RPT (Repeat) button MIX (Mix play) button Radio memory buttons DISP (Display) button Quick search button AUX button CD EJECT button CD button Type A (with MUTE button) 11. 12. 13. 14. 15. 16. 17. 18.
Black plate (162,1) FM-AM RADIO WITH COMPACT DISC (CD) PLAYER (for Europe, Russia and Ukraine) N04AE19 Anti-theft system (with personal code) N04AE1901 By using a personal 4-digit code known only to the vehicle owner, the possibility of the audio unit being stolen is effectively reduced, because without the code, the unit can not be activated. When used normally, the unit is unlocked and accessible in the usual way.
Black plate (163,1) If the battery supply to the vehicle is interrupted by accident for some reason, the unit will lock. To unlock the unit, proceed as follows: 1. Turn the ignition switch to the “ACC” or “ON” position. 2. Turn on the audio unit by pushing the POWER ON/OFF button. 3. Radio Code is displayed along with four numerical zero digits. 4. Push preset button *1 the number of times corresponding with the first digit of the radio code.
Black plate (164,1) Bass control: Use this control to enhance or attenuate bass response sound. Treble control: Use this control to enhance or attenuate the treble. Balance control: Use this control to adjust the balance of the volume between the left and right speakers. Fade (Fader) control: Use this control to adjust the balance of the volume between the front and rear (if equipped) speakers. AUX VOL (Auxiliary volume) control: Use this control to adjust the volume output from the auxiliary source.
Black plate (165,1) brightness between the daytime and nighttime modes. ● The audio unit will automatically detect if a CD containing MP3/WMA files is inserted, and [MP3CD] will be indicated. ● An error notification message will be displayed when inserting an incompatible disc type (e.g. DVD), or if the player cannot read the CD. Eject the disc and insert another disc. Mute button (for Type A): N04AE190209 Push the MUTE button to mute the audio system, and MUTE appears on the display.
Black plate (166,1) However, if the CD is not loaded, then a notification message will be displayed and the audio unit will remain in the radio or AUX source mode. Fast Forward, Fast Rewind buttons: N04AE190306 Push and hold the or button to fastforward or rewind through the track. When the button is released, the track will play at normal playing speed. Track up/down: Pushing the or button once, the track will skip forward to the next track or backward to the beginning of the current track.
Black plate (167,1) are turned in. During the search, the notification message AUTOSTORE appears in the display and the sound is muted until the autostore operation is completed, upon which preset channel 1 is automatically tuned in. TUNE/MENU knob: N04AE190403 When adjusting the broadcasting station frequency manually, turn the TUNE/MENU knob until the preferred frequency is achieved. The frequency changes in steps of 100 kHz on the FM band and 9 kHz on the AM band.
Black plate (168,1) in station. RDS functions N04AE1909 Programme Service (PS) function (station name display function): N04AE190901 When an RDS station is tuned in with seek or manual tuning, the RDS data is received and the PS name is displayed. TA Traffic announcement N04AE1910 This function operates in both FM (radio) and CD mode. ● Pushing the TA button selects the TA mode. The TA indicator is displayed while TA mode is on. ● When TA is pushed again.
Black plate (169,1) AUX button N04AE4802 To operate the USB memory use one of the following methods: ● Push the AUX button then turn the TUNE/ MENU knob to the USB item. Once highlighted, push ENTER. ● Push AUX repeatedly until USB is highlighted, then push ENTER.
Black plate (170,1) the U.S. and other countries. Compatibility The following models are supported: ● First generation iPhone (firmware version 2.2.1) N04AE4902 ● Second generation iPhone 3G (firmware version 3.1.3 (7E18)) ● Artists ● Albums ● Tracks ● Fourth generation iPod Classic (firmware version 3.1.1) ● Fifth generation iPod video (firmware version 1.3) ● Sixth generation iPod Classic 80 GB (firmware version 1.1.2PC) ● Sixth generation iPod Classic 120 GB (firmware version 1.1.
Black plate (171,1) Track time BLUETOOTH® AUDIO PLAYER settings Track details: To set up the Bluetooth® system with your preferred device, push the SETUP button and select Bluetooth®, then push the ENTER button or alternatively, push the PHONE button. The following items are available: N04AE5003 Pushing and holding the button will turn the display into a detailed overview and after a few seconds it returns to the main display or push briefly.
Black plate (172,1) ● Audio device without PIN code: The Bluetooth® connection will be automatically connected without any further input. ● Audio device with PIN code: A new screen will appear. Assign the 4 digit PIN code by turning the TUNE/MENU knob to each code and push the ENTER button to confirm. Then select “Validate” and push ENTER. The Bluetooth® connection will be made. The 4-digit PIN code is provided with the audio device, see the owner’s manual of the audio device. 3.
Black plate (173,1) tooth® version of the device. memory modes will be skipped. VOLUME control switch buttons: Fast Forward, Fast Reverse: N04AE1003 Push up or down the VOLUME control switch to increase or decrease the volume. N04AE500401 When the or button is pushed continuously, the track will be played at high speed. When the button is released, the track will be played at normal playing speed. Memory change (radio): Track up/down: Push the tuning switch for less than 1.
Black plate (174,1) CAR PHONE OR CB RADIO N04AK When installing a CB, ham radio or a car phone in your vehicle, be sure to observe the following cautions, otherwise the new equipment may adversely affect the Engine Control System and other electronic parts. CAUTION: ● ● Keep the antenna as far away as possible from the Electronic Control Module. Keep the antenna wire at least 20 cm (8 in) away from the Engine Control harnesses. Do not route the antenna wire next to any harnesses.
Black plate (175,1) NOTE: For details, see your mobile phone’s owner’s manual. ● Select Device Paired Bluetooth® mobile phone are listed on the display and can be selected for connection. ● Delete Device A registered Bluetooth® mobile phone can be deleted. ● On/Off If this setting is turned off, the connection between the Bluetooth® devices and the invehicle Bluetooth® module will be cancelled. SAA3478 1. 2. 3.
Black plate (176,1) — Manual dialling To dial a contact from the phone book proceed as follows: — Missed calls 1. Push the Phone button. — Dialled calls 2. Turn the TUNE/MENU knob and scroll down to Phone Book then push ENTER. — Received calls Redial: N04BJ020101 To redial or call the last number dialled, push the Phone button for more than 2 seconds. 3. Scroll down through the list, select the appropriate contact name (highlighted), and push ENTER. 4.
Black plate (177,1) delete each subsequent number. During a call: N04BJ020201 4. After entering the last number, scroll to the symbol, and push ENTER, or push the Phone button to dial the number. Call Lists: During a call, by scrolling and pushing ENTER, you can select the following options: ● “ ” — Use this item to enter numbers during a call. For example, if directed by an automated phone system to dial an extension number the system will send the tone associated with the selected number.
Black plate (178,1) ● redial the last outgoing call by pushing and holding the button for a short period of time. SAA2362 Steering wheel switch for Bluetooth® N04BJ0203 The hands-free mode can be operated using the controls on the steering wheel. Volume control switch: N04BJ020301 The volume control switch allows you to adjust the volume of the speakers by pushing the + or − buttons *1 .
Black plate (180,1) FCC Information to User This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Black plate (180,1) MEMO Model "AGC-3220YF: 2010/ 12/ 13