MEZ-300 MEZ-300 동작 설명서 Operation manual We recommend that you read the Mental Doctor manual before using the product Rev 1.
Name and description of each part of the product Volume/move Charging and measurement When you need to charge the battery or when you measure the pulse wave or the brain wave, connect the cable. ※For upgrading the firmware Battery LED + ▲ ▼ Menu/pause Reset button Volume adjustment UP When operation is abnormal, press the button inside the hole. Use it when increasing the setting value Use when setting the functions or pausing the contents.
Turning on the power and setting the focus 1. Power button and focus setup Turning on power Turning off power ① Press the left power button [Power button] Press the power button for 2 seconds and the power will turn off with “power turning off” sound.
Pairing Bluetooth Search for “Mental Doctor ezbalance” in Google Playstore or iPhone Appstore to download and install the app. ■ While the device is turned on, run Mental Doctor ezbalance app, then you will be directed to the Bluetooth setting screen on your smartphone to pair Bluetooth ■ On the Bluetooth setting screen, search for the device ■ When “MEZ3-??C “ is searched, register the device. ■ For iPhone, how to register the device is the same.
Using the product 1.
Using the product 2.
Using the product 3.
Using the product 4. Play Contents ※ During contents operation, output can be heard through the device's speaker or earphone while connected to Bluetooth.
Charging ※ While charging, only charging is possible and other features will not be available, so when you use the device, remove the charger. ● When the charger is connected to the charging terminal of the device, charging the battery starts and the power LED begins to blink in red. ● While charging, the power LED blinks in red in 1 second interval (flicker) and when charging is complete, the power LED will be lit in red ● Once charging is complete, remove the charger.
Setting the features ● When you want to go to the feature setup screen, press the menu button on the bottom of the product for 4 seconds, then you will hear the “focus setting” voice, the first menu of the feature setting. ● It is consisted of 4 menus in the sequence of: focus setting -> brightness setting -> repeat speed setting -> voice alert, and when you press either the menu button or play/stop button, it will move to the next menu 1.
Setting the features 3. Repeat speed setting ● Set the repeat speed of the light moving left and right. ● When you press the down (-) button in the move/volume buttons, the speed will gradually slow and if you press the up (+) button, the speed will increasingly become faster ● To change to setting value, press the move ( ) button and you will hear the current setting value in voice. ● You can adjust from 1 to 10 levels for setting the brightness ● The basic setting value is set at 5.
16. Product specification ➢ Model name MEZ-300 ➢ Smartphone application Android/iOS(version 13.0 or higher) ➢ Bluetooth specification Bluetooth 4.1 Classic + BLE / 2400 ~2480MHz ➢ Brainwave measurement (EEG) 2CH EEG dry type electrodes/ ear reference electrodes ➢ Pulse wave measurement (PPG) Heart-Rate Sensor ➢ Voice output Speaker (Max1.0W) and earphone (Max20mW) output ➢ Eyeball movement Blue LED horizontal movement Light Bar.
17. Notice FCC This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1) this device may not cause interference and 2) this device must accept any interference, including interference that may cause undesired operation of the device. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.