User's Manual

ManualsBrandsHull Base International ManualsCamera & Photo2.4GHz Wireless Monitoring System (Camera Unit)

Table Of Contents

Wireless Baby

Monitor

User Guide

Thank you for purchasing the Lil' Jumbl Wireless Monitoring System. This User Guide is intended to

provide you with guidelines to ensure that operation of this product is safe and does not pose risk

to the user. Any use that does not conform to the guidelines described in this User Guide may void

the limited warranty.

Please read all directions before using the product and retain this guide for reference. This product

is intended for household use only.

This product is covered by a limited one-year warranty. Coverage is subject to limits and exclusions.

See warranty for details.

This package includes:

• Monitor unit

• Camera unit

• 2x Rechargeable batteries (for monitor and

camera unit)

• 2x A/C adaptors (for monitor and camera unit)

• 4x Interchangeable Front panels (for monitor

and camera unit)

• Wall mounting bracket (for camera unit)

• User Guide

Customer Service:

info@liljumbl.com

866-849-3049

Distributed by

C & A Marketing

2 Bergen Turnpike

Ridgefield Park, NJ 07660

liljumbl.com

info@liljumbl.com

Made in China

Lil' Jumbl is a trademark of

C&A IP Holdings, LLC

Summary of content (12 pages)

PAGE 1
Wireless Baby Monitor User Guide Thank you for purchasing the Lil' Jumbl Wireless Monitoring System. This User Guide is intended to provide you with guidelines to ensure that operation of this product is safe and does not pose risk to the user. Any use that does not conform to the guidelines described in this User Guide may void the limited warranty. Please read all directions before using the product and retain this guide for reference. This product is intended for household use only.
PAGE 2
Safety Warning: Please read this user guide carefully before operating the Lil' Jumbl Wireless Monitoring System to ensure safe and proper operation of the unit. Failure to do so may result in injury or death. • Keep A/C adapters and cords out of the reach of children. • Keep A/C adapter cords protected. Do not allow them to be pinched by furniture or other household items. Do not place them in areas of high foot traffic where they can be walked on which compromises their function.
PAGE 3
Table of Contents 1. Features 4 2. Product Overview 4 3. Getting Started 5 3.1 Monitor Unit Installation 5 3.1.1 Battery And A/C Adapter 5 3.1.2 Antenna 6 3.1.3 Stand 6 3.2 Camera Unit Installation 6 3.2.1 Battery And A/C Adapter 6 3.2.2 Wall Mount 6 3.2.3 Temperature Sensor 6 4. General Operation 7 4.1 Power On/Off 7 4.2 Adjusting the Volume of the Monitor Unit 7 4.3 Intercom / Two way talk 7 4.4 On Screen Status Bar 7 4.5 Menu And Navigation 7 4.
PAGE 4
1. Features • Digital 2.4GHz (FHSS) Wireless Transmission. • Extended transmission distance up to 900 feet in open area. • Colored icons UI (user interface) integrated with touch panel control. • Night vision capabilities when operating in dim area. • Soft glowing night light helps to maintain a calming atmosphere. • Features five (5) preset lullabies. • Built-in temperature sensor. • Interchangeable front panel for both monitor and camera units.
PAGE 5
Technical Specifications of Camera Unit CMOS sensor: 1/6" VGA, 640x480 Night vision: 8 x IR LEDs Camera Tilt angle: +15 / -19 degree Audio: Built-in microphone and speaker Night light: Soft light Lullabies: 5 preset lullabies Temperature sensor: Built-in Front panel: Interchangeable front panel Power: A/C adaptor or Lithium rechargeable battery Mounting mechanism: Detachable wall-mount bracket (Pan angle +/- 30 degree) Control / buttons: Power, Pairing Dimensions: 2.91" x 5.47" x 1.
PAGE 6
Antenna Knob 3.1.2 Antenna You can adjust the antenna length by sliding the shifter at the back of the monitor unit. (Pic.2) To achieve optimal signal reception, you should maximize the antenna length during operation. 3.1.3 Stand To place the monitor unit on the table at a viewable angle, you can flip out the stand at the back side of the monitor unit. (Pic.2) Stand Pic.2 3.2 Camera Unit Installation 3.2.
PAGE 7
4. General Operation 4.1 Power On/Off To power on both monitor and camera unit, press the power button on each unit once. The power LED will light up to indicate the unit is operating. To power off the monitor and camera unit, press and hold each power button for three (3) seconds. 4.2 Adjusting the Volume of the Monitor Unit Press the VOL + / VOL - buttons at the top of the monitor unit to increase or decrease the speaker volume.
PAGE 8
4.6 Clock, Day, Feeding Timer and Alarm This section contains instructions on how to set the clock and alarm features. In the Main Menu, press the SETTINGS icon to enter Settings mode. • Set Clock: Press the Time icon (time display shown) to set the time. - Press UP and DOWN icons to set hour, minute, AM and PM. - Press Save • Set Day: Press the Day icon (day display shown; ie. SUNDAY). - Press UP and DOWN icons to set day. - Press Save • Set Feeding Timer: In the Main Menu, press the ALARM icon.
PAGE 9
• In Settings Mode, press the MORE icon. • Press the SCREEN icon. - Press LEFT or RIGHT to adjust brightness and contrast - Choose display color (BLUE or PINK) - Press Save 4.8 Temperature There is a temperature sensor located on the camera unit to detect the environmental temperature and display on your monitor unit. The temperature unit can be set to Celsius (°C) or Fahrenheit (°F). In the Main Menu, press the SETTINGS icon to enter Settings mode. Press TEMPERATURE icon to enter Temperature mode.
PAGE 10
4.12 Zoom Mode Tap the center of the image on the monitor screen to zoom one time. UP, DOWN, LEFT and RIGHT arrows will appear on the screen. Tap UP, DOWN, LEFT or RIGHT arrows to pan. The image can pan UP or DOWN 10 times from the center, and LEFT or RIGHT 20 times from the center. Tap the center of the image on the monitor to return to normal viewing mode 4.13 Camera Pairing Menu The monitor unit can pair with four (4) different camera units simultaneously.
PAGE 11
4.15 Lullaby Menu On the camera unit, there are five (5) preset lullabies available. In the Main Menu, press the LULLABY icon. From here you can select SOUND, DURATION, and CAMERAS. Enable/disable PLAY. The properties of each setting are shown below. Setting Description Options Cameras Select the camera unit to play lullabies 1-4 Sound Select the preset song number to be played back 1-5 Duration Choose duration to play Lullaby 1 min, 10 min, 30 min, Stay On.
PAGE 12
Q. What is ECO MODE and how does it work? A. Its main purpose is to conserve battery by shutting off the display and allowing the monitor unit to “wake up” from ECO mode when noise is detected near the camera unit. Entering ECO mode: Select the duration before entering ECO mode. (section 4.10) Within this period, the system will start its timer to detect noise from camera unit. If noise is detected, the timer will restart. If there is no noise during this period, the monitor unit will enter ECO mode.