Wireless Monitoring System User Manual v1.
Content 1 Safety Instructions and Warnings 1-2 2 Components List 3-4 3 Product Features and Overview 5-6 3.1 Features and Specifications 3.2 Overview 4 Getting Started 4.1 Powering and Battery Charging Monitor Unit 4.2 Powering Camera Unit 4.3 Mounting Camera Unit 4.4 Back Mount Mechanism 5 Operation 5 6 7-10 7 8 9 10 11-19 5.1 General Operation 5.1.1 Power ON/OFF 5.1.2 Icons Definition 5.1.3 Volume Adjustment 5.1.4 Brightness Adjustment 5.1.5 Switching Camera Number 5.1.6 Zoom 5.1.
5.4 Menu Mode - Audio 5.4.1 VOX Delay 5.4.2 VOX Sensitivity 5.4.3 Audio Alert 5.4.4 Sound Level LED 5.4.5 Auto Mute 5.4.6 Intercom Volume 16 5.5 Menu Mode - Camera 5.5.1 Camera Selection 5.5.2 Camera Pairing 5.5.3 Lullaby Playback 5.5.4 Auto Scan Mode 5.5.5 Split Screen Mode 17 5.
1 Safety Instruction and Warnings Please read carefully this user manual before using Hestia H102 wireless monitoring system. Strangulation Hazard - Keep the adapter cord out of the reach of children. Never place the camera or cord within 3 feet (1 metre) of a crib or playpen. Cord Protection - Protect the adapter cord. Route cord so that they are not walked on or pinched by items or against them. Choking Hazard - This product contains small parts which may cause choking. Not for children under 3 yrs.
Do NOT attempt to open the monitor unit, camera unit, battery and A/C adapter. No user-serviceable parts inside. Risk of electrical shock, fire or death. This product is not a substitute for responsible adult supervision. Check your baby's activities at regular intervals. When not using the product for long periods, remove the battery and disconnect the A/C adapters from electrical outlet. This product is intended for indoor use only. This product is not a toy. Do NOT allow children to play with it.
2 Component List Thanks for purchasing Hestia H102 wireless monitoring system. Please make sure you have the following components in the packing. Monitor unit with flip stand Camera unit with camera stand For combo kit, one more camera unit is bundled with H102 wireless monitor system.
Multi-purpose Mount Rechargeable battery Screw and double-sided tape User Manual AC adapters x2 A/C Adapter Information Manufacturer Model number Input Output Chou Sen Electronics (Shenzhen) Co., Ltd. CS6D050100F series 100-240V ~ 50/60Hz 5V 1A Kuantech Company Ltd. KSAS0050500100 series 100-240V ~ 50/60Hz 5V 1A Battery Information Manufacturer Model number Specification J&Y Technology Co., Ltd. Ni-MHAAA850 3.6V Ni-MH rechargeable 3.6V Shenzhen HighPower Technology Co., Ltd.
3 Product Features and Overview 3.1 Features and Specifications Ÿ Digital 2.4GHz (FHSS) Wireless Transmission. Ÿ Extended transmission distance for greater than 300m in open area. Ÿ Automatic night vision capabilities for operating in dim environment. Ÿ Intercom (Push to talk) function allows dual way communication. Ÿ Sound level indicator offers visible audio information during mute mode. Ÿ 2x zoom function to provide high detail image. Ÿ Video off mode (Audio only) for high efficiency power saving.
3.2 Overview 1 1. Power ON/OFF Video off Button 2. Antenna 3. Power / Charging Indicator 4. Sound Level Indicator 5. TFT Display 6. Brightness + / - B utton 7. Menu / Button 8. Microphone 9. Speaker 10. Volume / Button 11. DC Jack 12. Strap Holder 13. Push to talk (PPT) Button 14. Flip Stand 15. Battery Door 12 2 3 13 5 14 6 7 15 4 8 9 10 11 Monitor Unit 1 7 8 2 3 9 4 5 10 11 6 12 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12.
4 Getting Started 4.1 Powering and battery charging Monitor Unit As shown in pic. 1, remove the silicon sleeve and flip stand from monitor unit. Then open the battery door. pic.1 Insert the rechargeable battery to the battery bay and plug into the battery socket as instructed in pic. 2. Close the battery door, install the silicon sleeve. Black Red pic.2 Plug the A/C adapter into the wall electrical outlet. Then attach the cord to the DC Jack as shown in pic. 3.
4.2 Powering Camera Unit Plug the A/C adapter into the wall electrical outlet. Then attach the cord to the DC Jack as shown in pic. 4. pic.4 4.3 Mounting Camera unit The camera unit was designed to support different mounting mechanism, from simply putting on a table to mounting on a wall by screw or double-sided tape. Mount the camera unit by screw 1. Tighten the provided screw the provided screw onto the wall surface by a screw driver, until the screw only sticks out by about 6mm as shown in pic. 5. 2.
Mount the camera unit by double-sided tape pic.6 1. Clean the mounting surface by alcohol. 2. Remove the cover label from the double-sided tape, and stick it onto the recess area of camera base plate, as s hown in pic. 6 Black Word 3. Remove the cover label from the other side of double-sided tape, and stick the camera base plate onto the mounting surface. Press the camera base plate onto the mounting surface for 10 seconds. Wait 24 hours then hook the camera stand onto base plate. pic.
Power cord cable can be inserted to the cable mounted as shown in pic. 8. 4.4 Back Mount Mechanism Both monitor and camera unit carried an identical back mount mechanism. Different accessories (flip stand, multi-purpose mount, camera stand) can be installed to either monitor unit or camera unit based on different needs.
5 Operation 5.1 General Operation User operation is divided into 2 different modes. General operation is referring to user operations when the capturing image being displayed on screen. 5.1.1 Power ON/OFF To power on Monitor unit, press the power button and hold for 1 second. The Power LED will emit blue light to indicate the system is on. To power on Camera unit, slide the power switch to the 'ON' position. The Power LED will emit blue light to indicate the system is on.
5.1.2 Icons Definition Signal Reception Battery Capacity Camera number Volume / Brightness Level Camera Number Signal Reception Battery Capacity Volume / Brightness Level Indicates the current camera shown on screen. The camera number will be displayed at numeric form inside the icon. Indicates the current signal reception strength from camera unit. During no signal status, a flashing icon will be shown. Indicates the capacity of NiMH battery.
5.1.5 Switching Camera number Hot-keys is available for switching different camera number at general operation. Press and hold menu button, then press + button will switch to next camera number. Press and hold the menu button, then press - button will switch to previous camera number. Tips Switching camera function is also available at menu mode, as mentioned in section 5.5.1 5.1.6 Zoom Hot-keys is available for activating zoom function at general operation.
5.2 Menu Mode Menu mode can be activated by pressing either menu button or menu once. The below screen will be displayed during menu mode. Title Function / Options Description Title Video Settings Audio Settings Camera Settings Load Defaults 4 main titles are available - Video, Audio, Camera and Defaults. Function / Options At different title, different functions and their current settings will be shown. Description Show a brief description of selected components.
5.3 Menu Mode - Video 5.3.1 Saturation Adjust the color saturation of displayed images Saturation Vivid Normal Cool High saturated image Normal saturation Low saturated image 5.3.2 Night Vision ON Night Vision Select different Night vision mode Set ON the Night Vision mode OFF Set OFF the Night Vision mode Auto Use build-in light sensor to detect light level and trigger ON/OFF the night vision mode automatically 5.3.3 Zoom mode To enter zoom mode, select '' option and press 'OK' button.
5.4 Menu Mode - Audio 5.4.1 VOX Delay VOX is a power saving feature to turn off video and audio system of monitor unit, when the environment of camera side is silent. The system will be resumed automatically when camera unit detect noise. There are two user settings available for VOX function. VOX Delay is referred to the duration of silence before entering VOX mode.
5.4.4 Sound Level Indicator Sound Level indicator is the 4 indicators located at top of display screen, showing the sound level captured from camera unit. Set ON to activate this function, set OFF to disable the indicators. 5.4.5 Auto Mute Auto Mute function acts as a white noise eliminator, which shut down the audio system when no sound is captured from camera unit for 10 seconds. When Auto Mute is activated, and noise is detected from camera unit, the audio system of monitor unit will be resumed.
5.5.2 Camera Pairing To pair a new camera unit, select a 'Not paired' camera number from Camera menu, and press 'OK'. Below screen will be shown : Select 'Pair' function and press 'OK' button. The monitor unit will start searching the camera unit and a 'Connecting' status will be displayed. Power on the camera unit. Press and hold 'P' button of camera unit will initiate the pairing mode and connecting to the monitor unit.
5.5.4 Auto Scan Mode Auto scan mode is an automatic camera switching function to all paired camera units at an interval of 15 seconds. The display sequence is at numeric order of camera number. For example : Cam1, Cam3 and Cam4 are paired, the sequence will be cam1 > cam3 > cam4 and loop. During auto scan mode, VOX function will be automatically set OFF. 5.5.5 Split Screen Mode Split screen mode is a function to display 2 camera captured images simultaneously at the same screen.
5.6 Menu Mode - Load Default Select 'Restore factory settings…' function, and press 'OK' button. System will prompt to reconfirm the action, select 'YES' and press 'OK' button will restore the factory default. Select 'NO' and press 'OK' button will go back to Load Default page. Tips Camera pairing information will not be deleted during factory default reload.
6 Troubleshooting and Tips Q. I don't get a screen at all. Make sure both monitor and camera unit are turned on. The blue power LED will light up and indicate the system is powered on. If blue power LED is not light up, please check if the A/C adapter is properly connected to the devices and to the wall outlet. For troubleshooting purpose, please remove the NiMH battery from the monitor unit, and use only A/C adapters to power on the system. Q.
Tips Tips: User can turn off the 'Out-of-range' audio alert manually as mentioned in section 5.4.3, if necessary. Q. Why I get a black and white image instead of color image? A. It is the night vision mode image generated by infra-red light. At default setting, the system will automatically detect the ambient light level, and trigger On/Off the night vision mode. User can turn On/Off the night vision manually as mentioned in section 5.3.2. Q. How can I avoid the shrill sound (feedback noise)? A.
7 Warranty Information We warrant to the original user that the product is free from material and workmanship defects for a period of one (1) year from the date of original purchase. If this monitoring system fails to function properly when used as directed under normal condition within the one year period, we will either repair or replace the product, at our discretion, free of charge. Legal rights vary from country to country.
8 FCC Statement WARNING: Modifications not authorized by the manufacturer may void users authority to operate this device. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Copyright© of Hull Base International Ltd. All Rights Reserved www.hullbase.