Instructions / Assembly

EXPLODED PARTS INSTALLATION
CAUTION
 Inspect the wire insulation for any cuts, abrasions or exposed
copper that may have resulted during shipping. If there is a
defect in the wire, do not attempt installation.
 Before starting installation of this fixture or removal of a
previous fixture, disconnect the power by turning o the
circuit breaker or by removing the fuse at the fuse box.
ASSEMBLY INSTRUCTIONS
If you need further assistance, please contact us by Email: [e-mail]
@
* PARTS SHOWN MAY DIFFER SLIGHTLY PER LIGHT FIXTURE
HARDWARE INCLUDED
TOOLS REQUIRED
Bulb
(not included)
STEP 1
Unscrew the ball nuts from the mounting unit.
Use the mounting screws to attach the mounting unit
to the junction box (not included).
Ball Nuts
Fixture
Mounting Unit
Mounting Screws
Wire Nuts
Junction Box
(not included)
STEP 2
Black wire from the
fixture identified
with the label "L"
Bare ground wire
from the Fixture
Ground wire from the
Fixture identified with
the label "G"
White wire from the
fixture identified
with the label "N"
*Green Ground Screw
Bare or Green ground wire
from the junction box
Black or Red wire
(live wire)
from the junction box
White wire
(neutral wire)
from the junction box
*Sealing tape
(not included)
Make the electrical connection from the junction box (not included) to the
fixture. Connect the ground wire to the mounting unit using the preinstalled
green ground screw. Next, connect the live wire, neutral wire and ground wires
with the supplied wire nuts. Secure with electrical tape.
Fixture Mounting Unit Mounting Screws Wire NutsBall Nuts