User Manual
Table of Contents Safety and Use......................................................................................................................3 Installation Guide.................................................................................................................4 Main Interface Overview...................................................................................................4 Entrance to Main Interface.............................................................................
Safety and Use We recommend that you read this chapter carefully before using your modem. The manufacturer disclaims any liability for damage, which may result as a consequence of improper use or use contrary to the instructions contained herein. Traffic Safety When driving, do not use your modem • When switched on, your modem emits electromagnetic waves that can interfere with the vehicle’s electronic systems such as ABS anti-lock brakes or airbags.
7. Always handle your modem with care and keep it in a clean and dust-free place. • Do not open, dismantle or attempt to repair your modem yourself. • Do not drop, throw or bend your modem. • Do not paint it. Collection Point: This symbol on your modem means that these products must be taken to collection points at the end of their life: • Municipal waste disposal centers with specific bins for these items of equipment Collection bins at points of sale.
Linux OS: 1. Open the terminal firstly (The path of terminal is Applications->Accessories->Terminal) 2. Let OS known the Mobile device, please input the following command: sudo modprobe usbserial vendor=0x1BBB prodcut=0x0012 [Note:] same command need enter again if you reboot your PC 3. Install tool Check if you can visit Internet, if not, you can't install the basic tools.
Following table are listed the LED Indicates for each status. LED Indicator Desctiption Indicator constant red light Power supply is under normal status when plug into PC’ s Red light slow flashing(On 0.2s, Off 1.9s, Repeat) Network searching and registering into network Red light quick flashing In used Entrance to Main Interface The application runs automatically and the main window will pop up when your modem will be connected. You can also access and run the application from the menu.
• Enter the text. 3. Send (1) You may enter a recipient’s number in 2 ways: • Enter the number directly. If there are two or more recipients, use “;” to separate each; • Enter the name of a recipient saved in the phonebook; (2) Click on to send the message. If the message is not sent, it will be saved in the Outbox. 4. Reply • Select a message in the inbox and then click on in the shortcut menu bar; • The recipient’s / number will appear.
• Modify the relevant contact information, and select to save the changes. 3. Delete • Click on from the tool bar. A dialog box will ask “Delete contact, are you sure?” • Click on and the contact(s) will be deleted; deleted contacts will not be restored. 4. Send SMS • Click on in the tool bar; • When the message is completed, you may send it by clicking on .
1. Q: Which operation systems does the software support? A: It supports Windows 2000, Windows XP, Windows Vista OS, Windows 7, MAC, Linux . 2. Q: I cannot install the driver A: On some PCs, installation of the driver may take a long time because of the PC configuration. So please wait and do not cancel the process or you will have to uninstall and re-install again. 3.
A: The reasons are shown below: 1> Unstable local signal; 2> The software is an old version; 3> Hardware problem. You may: 1> Try to logon from another location; 2> Upgrade the software; 3> Check the hardware or use another data card and retry. 5. Q: Why does the prompt “ No available connection profile. Please set an available default one in connection profile? A: Please add a connection profile manually. 6.