Thank you for purchasing TCL mobile phone. Please go through this manual carefully to make the best use of your handset. 1 SAFETY AND PRECAUTIONS.....................................................2 2 PHONE LAYOUT ..........................................................................4 3.SPECIFICATION SCHEDULE ......................................................6 4.GETTING STARTED.....................................................................6 5. BRIEF INTRODUCTION ..............................
1 Safety and precautions ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ Please do not touch the antenna of the handset when calling, so as not to affect the sound quality of the call. Switch off the phone in the vicinity of chemical plants, gas stations and other explosives. Keep the phone clear from children. Please use the hands-free device (optional) when driving to ensure safety; unless in contingent situations, pull over the vehicle first and use the handset.
: The original factory will not take any responsibility in the case of noncompliance with the above advices or improper use of the handset. : Please send used li-ion batteries to specified locations or return them to our company. Do not dispose of the batteries into wastebins.
2 Phone Layout The handset has 18 keys, a display screen, a built-in vibrating motor, and a recharge jack.
Harness hole Antenna Battery latch Battery Page 5
3.Specification schedule Specification Size Dimensions Display Weight Type of SIM Network system Phone book capacity Parameters 79*42*16.5mm Approx.
accessories may not ensure compliance with FCC RF exposure guidelines. 4.Getting Started What is SIM? When registering your mobile phone number, you will have a SIM(Subscriber Identity Module) card provided by the network supplier. With the SIM card, storing many parameters required for communications, you can use the various functions of the handset, and save personal information, including PIN (Personal Identification Number), phonebook, short message and other extra system services.
Charging the battery ■ The handset is powered by a rechargeable battery. A new battery must be fully charged before the first time use. A new battery will reach its nominal capacity after fully charged and discharged for a few times. ■ In order to use the battery in optimum mode, we recommend you discharge the battery fully once each month by using up the power as to switch off the handset. ■ In course of charging, it is normal to find the battery warm up slightly.
icon indicates full grid on the screenThen unplug the handset from the cable by pressing the buttons on the both sides of the plug to remove the plug. Note: - To ensure safety usage, neither change the parts and fitments of the battery by yourself nor unwrap the battery. - We suggest you use only the battery and the charger supplied with your phone by TCL, so as not to do the damage to your handset. 5.
English letters, symbols characters etc. They can also be used to select menus. For international call, hold down By holding down to key in standby mode to enter symbols of “+”. keys for 2 seconds or over, you can quickly dial out the phone number correspondingly to the shortcut key. (You can define these shortcut keys in the directory editing process) Displaying pattern of the main screen There are 8 icons in total on the first line of the screen: Antenna. Strength of signal.
regarding English entry methods for specific operations. Receiving prompt modes With a built-in vibrating motor and a buzzer, the handset can offer the following prompt modes for receiving calls: Ring Vibrate. Ring after vibrate. Mute mode. STK function The handset supports STK (i.e. SIM ToolKits) function, with the specific menu items co-determined by the SIM card and the network.
code at the back of the handset. The code stored in the handset can be displayed by entering “*# 06 #” in standby mode after the handset is on. No matter which brand of cellular phone worldwide must be printed with this identification code, and the IMEI code for each handset is globally unique without repetition with another. Enhanced Full Rate Coding (EFR ) The handset has the “ Enhanced full rate coding" function, which needs no presetting, the handset can detect the network system automatically.
Switching off To turn off the handset, please hold down the on-hook key, the handset is off after the log-off animation is displayed on the screen. Do not attempt to switch off the phone by directly taking out the battery, which may possibly result in memory loss of the SIM card. Making a call For international call, use “+” to substitute “ 00 ”, enter a whole numbers, and push the calling key to dial out a call.
of the incoming call will display on the screen. And if the number has already been saved in the phonebook, the name will also be displayed on the screen The way to end a call is similar to the above one. Dial with shortcut key The handset provides 9 shortcut keys. You can customize the phone numbers corresponding to the keys (see Phonebook for detail information)。In this case, you can make a quick call as long as holding down to key in standby mode.
Call holding If you have subscribed to the value-added service of call holding, the following function menu will occur by pressing the left-soft key during a communication. ◆ Volume: To adjust sound volume (This line added) ◆ Hold: To hold an ongoing call, then make another call. ◆ Hang up: To end the current call.
Missed calls When you receive an incoming call without answering, the main screen will display a list, you can access the list to view the unanswered call Cell broadcast When receiving a cell broadcast, the screen will display a list, and the user can access the list to read the cell broadcast. Connect to voice mailbox The handset allows you to forward the incoming call to a voice mailbox, then you will receive information regarding a voice message available.
full. When viewing or editing a message, press the direction key to scroll the message pages, hold down the direction key to move the cursor on a character basis. 【Inbox】: You can view the received messages in Inbox. ◆ Edit: To access short message edit box ◆ Delete: To delete the current messages ◆ Forward: To forward the message to another person directly ◆ Archive: To save the received message in the Favorite of your handset.
as required. 【Message setup】:In this menu, you can preset some parameters of message function. ◆ Center number: To sent a message, you must enter the number of the local short message center in advance, which is provided by the network supplier. ◆ Validity: The valid retention time of a message ◆ Type of message: You can select the type of message 【Voice mailbox】 ◆ Listen to message: To call the voice mailbox to listen to a message left.
【All calls】: To display the call time and durations of the answered and dialed calls, while indicating the incoming time and dates of missed calls. 【Missed calls】: To display all receiving time and dates of missed calls.。 Press the calling key to dial out the phone number directly. 【Received call】: To display all call time and call durations of the received calls. 【Dialed calls】: To display all the phone numbers, call time and call durations of the dialed calls.
storage of the SIM card depends on the type of the SIM card. Enter a train of numbers in the standby mode and press the left-soft key to save. The interface for name input occurs after the type chosen by the user for the number. If entering nothing, you can press directly the left-soft key to access phonebook list. Select “Complete” and access the phonebook list directly.Now there are merely 2 options in the function menu of phonebook list: Search by name and Edit.
【Setup】 Saving mode: The storage location or mode of the record when presetting Add entry 【Used space】:To view the present service condition of the phonebook, including memory information of phonebook for both the SIM card and the handsetThe indicating formats are “ Used space/ Total usable space". 【Speed dialing list】: With this function you can view the records saved in the speed dialing list. 7.4 Clock 【Alarm】: A series of settings for handset alarming ◆ Set alarm: To preset the alarm.
where use of a handset is prohibited, in case an improper accident occurs. 2. Due to no button cell for this type, after removing the battery, the settings of data and time of the handset may change somewhat. Please re-preset after switching the handset on. 7.5 Audio profiles 【Set profile】: You can preset different profile mode per you requirement. Usually the following modes are provided for the handset ex works: ◆ Normal : The setup mode allows you to preset various functions per your penchant.
function has been set, the numerical key and and key entered from the key Pad will be transmitted to the recipient as DTMF tone in a communication. If the function not actuated, the functions such as to dial an extension number cannot be realized. Click the menu to turn on or off DTMF. ◆ Message alert tone: If On is set for the function, the handset will give off alert tone when receiving a message.
in the standby interface. ◆ My phone number: To preset the number of your handset, which depends on the SIM card. 【Call settings】: ◆ Number display: You can herein enquire the status of number display (This function needs network's support) ◆ Prompt tone per minute: This function can preset prompt or not per minute in calling. When you turn on the function, the handset will give off buzzer warning tones during calling to help you control the call duration.
2. Divert status *On *Off *Status inquiry 3. Select diverting modes: *All services(including voice, data, fax, short messages, etc. ); *Voice calls; *Data calls; *Fax calls; * Short messages * Service except short message 4. Divert to: Enter the numbers to which you intend to divert. ◆ Call waiting: The function can set Call waiting on or off. To realize possibly Call holding and Conference call, the function must be activated in advance, however, its actual implementation needs the support of the network.
◆ SIM card lock: To turn on or off the SIM card lock. ◆ Phone lock:Phone lock is a password with 4 -12 digits, defaulted as “ 1234 ” ex works. On: This menu actuates the phone lock function. Off: This menu shuts down the phone lock function. Change password: You can change the defaulted password “ 1234 ”into a 4-12-digit character for your remembering easily. If the phone lock setting is On, the handset will show you “Phone locked" when switched on.
supplier. The following 3 steps are needed to preset call restriction: 1 .Select the scope of call restriction: Home calls; International calls; All calls; International roaming receiving calls; All receiving calls; Off; 2. Limited service catalogs All services(including voice call ,data, fax, short messages, etc. ); Voice call; Data: Fax Short message Service except short message 3.
7.7 Tools Calculator The calculator in the handset can carry out continuous mixing four fundamental rubes with simple, practical and convenient operations. * key: Used to enter or switch the symbols of operation by pressing the key in succession, including pl, sub, times, div, etc. #key: Press the keys in series to enter or switch the operation symbols, including 4 arithmetic operators: decimal, sign of percentage,and right and left brackets.
receiving call available; after a streak, the record will be saved in the missed call records. ◆ Status: To enquire the alive status of the receiving call guard. ◆ On:To actuate the receiving call guard function. ◆ Off: To shut down the receiving call guard function. 7.8 Games The handset provides two classical games: Russian block and Knocking brick, as well as graceful music accompanying the games process, you can enjoy at ease the delight brought by the games.
correlative description can be viewed here, and press the right-soft key to quit. Knocking brick Use key 4 and 6 to shift the bat leftward and rightward separately, and press keys 1 to throw the ball.Push the left-soft key to start or halt the game, and the On-hook key or the right-soft key to quit the game. New game: To start playing a game. Resume game: To re-play from where interrupted last time. Best record: The best score for the game is recorded here for your inquiry.
ABC Entry Method Compared to T9 English Entry Method, the difference of ABC Entry Method is with no associating function, you can press keys in succession time and again to enter letters required. Enter a corresponding letter with each touch. For example: Press key for ‘D', and press to enter ‘A', press key key in succession to select 'A', key to switch capitalization, and other keys 'B’ or ‘C’ In the Entry Method, Use to enter letters.
into the slow charging mode after connected to the charger, this moment the handset has no display. The handset can normally be charged hours later depending on the degree of discharging. 1. The signal is too weak,There may be some radio interference all round. View whether the signal strength meter on the screen fails to show vertical Network lost lines. 2. The SIM card is located correctly, poorly contact or damaged? (If damaged, please ask your network supplier for replacement.) 1.
network supplier. SIM error 1. The SIM card is dirty, clean it. 2. Re-mount the SIM card. 3. The SIM damaged for replacement Appendix II Abbreviations and explanations CUG Closed User Group GSM Global System for Mobile communication GPRS General Pocket Radio Service SMS Short Message Service CB Cell Broadcast FDN Fixed Dialing Numbers SIM Subscriber Identity Module PIN Personal identity number. Supplied together with SIM card. Used to unlock the SIM card. PIN2 Personal Identity Number 2.
another receiving call without interrupting the present call,but it is different from multiparty calls. You can only talk to one party while another party is held at the same time. Call divert A service supplied by the Network, which allows you to divert a receiving call to a specified number in difference circumstances. Normally divided into Divert all calls, If busy, If no answer and If no reachable. Divert all calls All receiving calls will be diverted by the network unconditionally.