.SAFETY AND PRECAUTIONS ........................................................... 2 2.PHONE LAYOUT .................................................................................. 3 3.SPECIFICATIONS................................................................................. 4 4.GETTING STARTED ............................................................................ 4 5.BRIEF INTRODUCTION ..................................................................... 8 6.BASIC OPERATION .................
1. Safety and precautions ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ ◆ Switch off the phone in the vicinity of chemical plants, gas stations and other explosives. Keep the phone far away from children. Use the hands free device (optional part) or appropriate car kit if you need to use your mobile phone while driving. Observe the local regulations governing the use of mobile phones while driving. Switch off the phone when boarding on plane and don’t switch on the phone during the flight.
2. For body worn operation this phone has been tested and meets FCC RF exposure guidelines when used with an accessory that contains no metal and that positions the handset a minimum of 1.5 cm from the body. Use of other accessories may not ensure compliance with FCC RF exposure guidelines 2. Phone Layout The handset has 18 keys and 1 display screen. A vibrator, an earphone jack and a recharge transmission interface.(The actual product may differ from the below picture, please refer to your specific model.
3. Specifications Model/SPECIFICATIONS TCL T118 Size 91×44×15mm Volume Approx. 60cm3 Display 4 rows Weight Approx.
The SIM card stores many parameters required for communications, you can use the various functions of the phone, and also stores personal information including PIN1 (Personal Identity Number), phonebook, short messages and other extra system services. Use the SIM card carefully, do not bend or press hard. In case of loss, ask the operator for solution. Note: Do not leave your SIM card within the reach of small children.
5. Fig.5 PIN 1 code This is the personal identification number used to access your SIM card. When the PIN1 code request function is enabled, the screen will indicate“PIN:”when switched on. You can get the PIN1 while obtaining the SIM card from your network supplier. Usually the PIN1 code is 4 digits. During input of the PIN1 code, the screen will display“*”to substitute the input content. PIN 2 code This is the personal identification number required when using specific functions e.g.
z In order to use the battery in optimum mode, you must fully discharge the battery once a month by using up the power such that the handset switches off automatically. z During charging, it is normal for the battery to warm up slightly. The handset automatically self-protects so as to suit for the battery temperature. z If the low battery is comes on, the handset will give off voice alert and displays the “low battery” on the screen when the battery is close to being fully used up.
Note: 1. After the phone has run out of battery, we recommend you recharge in time. If you did not recharge in two days, the phone may enter into slow charging mode when you recharge the battery and there will be no display temporarily. After about 15 minutes, the charging indicator icon will be displayed on the screen of the phone. 2. To ensure safe usage, do not change the parts or components of the battery by yourself nor unwrap the battery. 3.
to select from the functional menu. Press the right soft key to directly access the phonebook. During menu operation, the functions of the left and right soft key are displayed at the bottom line of the screen and they are closely related to the current state of the phone. Numeric keys Numeric keys from 0 to 9 and symbol keys * and # are used for dialing, entering password, English letters and symbols. They can also be used to select from menu.
of the following three icons: Vibrate and ring. Vibration Only. Vibrate then ring. Light only. Incoming call prompt modes The phone has built-in vibrating motor and buzzer and provides the following modes of incoming call prompt: Ring. Vibration Only. Vibrate and ring. Vibrate then ring. Light only. Term Description 【Domestic call】 Please first input the area code and then the phone number to be dialed out.
off the battery, you can see the bar code label with this code at the back of the phone. The code stored in the phone can be displayed by inputting “*#06#” under standby state after the phone is switched on. All brands of mobile phone worldwide must be printed with this identification code, and the IMEI code for each phone is globally unique without repetition with another. 6. Basic operation Switching on The phone can be switched on (or off) by holding down the hang-up key.
not attempt to switch off the phone by directly taking out the battery, which may result in memory loss for the information not stored in the SIM card or the phone. Making a call To make an international call, use “+” to replace “00” and after inputting a complete number, press the calling key to make the call. The right soft key is used to delete the last digit of the number. Press and hold it to clear all the entry. When the connection is established, the call meter can be seen on the screen.
Recent calls The phone can store 10 recently dialed numbers. Press the calling key under standby state to display the dialed numbers. You can press the calling key to dial a desired number directly by selecting it with the direction key. Options during a call During a call, you can access option function by pressing the left soft key. Via options, you can hold (resume) a call, end a call, make a new call, open the phonebook, access message menu, microphone mute and disable (enable) DTMF.
Cell broadcast When you receive cell broadcast, the main screen will display the content of the cell broadcast. You can delete it by pressing the left soft key and return to standby interface by pressing the right soft key. Connecting to Voicemail The phone allows you to divert an incoming call to the voicemail. Then you will receive a notice regarding a voice message available (The number of the voicemail center must be preset first). 7.
record. ◆ Delete: Delete all options. ◆ Copy: Copy one from current storage to the other storage. ◆ Move: Move the record from current storage to the other storage ◆ Send Message: Send message to the record. You can access the following options if you access the phonebook from menu: ◆ Search Entry: Search exactly one specific phone number record by name. ◆ Add New Entry: Add one new phone number record. ◆ Delete All: You can choose to delete all records in the SIM card or in the phone.
A flashing icon will appear on the top row of the main screen if the memory is full. An alert voice of the phone can be heard if the other party has received the message (if shot message prompt tone and message informing setting is enabled). 【Write message】: You can create a short message in this menu. 【Inbox】:You can view the received messages in the inbox. ◆ Reply: Reply a short messge directly. ◆ Forward: Forward the message to another person directly. ◆ Edit: Access short message edit box.
in a specific area sent by the network operator, such as weather forecast, traffic conditions, etc. ◆ Receive Mode: Choose whether to receive cell broadcast or not. ◆ Languages: Choose the display language of cell broadcast. ◆ Channels: Set the channel of cell broadcast. Call History You can know about recent call status via this menu. 【Missed Calls】: Display the list of all missed calls. Select one of the calls and you can view its last calling time, phone number and calling times.
Settings 【Phone Setup】: In this menu, you can set such options as time, language etc. of the phone. ◆ Time and Date: Set time and date. ◆ Language: Choose the handset display of language. ◆ Input Method: Define default input method. The phone provides several input methods for your selection.For input method please refer to the operation instruction of input method. ◆ Display: Off:deactive. Show Date and Time:display time and date on standby interface.
network support.) Edit:Edit the number. Activate:Activate the service. Deactivate:Deactivate the service. 【Network Setup】 Network Selection: You can set whether to use automatic or manual network selection. Band Selection: You can set the band currently used by the phone. 【Security Setup】 SIM Lock: Enable or disable SIM card lock. Phone Lock: Enable or disable phone lock.Note.
User Profiles The phone provides profiles of General, Meeting, Outdoor, Indoor and Headset and default setting has been performed. Among them, the phone will automatically enter into headset profile after you connect the earphone. For each profile, you can customize the following options: 【Tone Setup】 Incoming Call: Set incoming call ringing tone. Alarm: Set alarm clock ringing tone. Power On: Set switch-on tone. Power Off: Set switch-off tone. Message Tone: Set short message prompt tone.
【Answer Mode】: You can choose any key answer for incoming call. 【LCD Backlight】: You can set the time for the backlight to turn off after no operation. Organizer 【To Do List】:You can create to do list with alarm on or off. 【Alarm】: The phone provides one alarm clock time points for your setting. You can set whether it is enabled, its ringing time point and ringing mode. Among ringing modes, you can choose once or everyday.
methods for you to choose. In edit interface, “#” is used to switch between input methods and “*” is used to access punctuation symbol interface. Smart English Input Method The phone provides two kinds of Zi Smart English Input Method of uppercase and lowercase. Zi Smart English Entry Method has associating function. The more letters you input, the more complete word you get. For example, pressing in succession key 2, 3, 7 and 8 will input “best”.
Network lost Can not make calls Can not answer Fail to preset functions PIN1 locked PIN2 locked Call costs meters inactive SIM error 2. Is the battery still useable?The battery performance will degrade due to several years' use. 3. The battery is over-discharged.The phone will come into the slow charging mode after connected to the charger, this moment the phone has no display. The phone can normally be charged 10 minutes later depending on the degree of discharging. 1.
GSM Global system of mobile communication. SMS Short message service. SMS-CB Cell broadcast . FDN Fixed dialing numbers. SIM Subscriber identities module. PIN1 Personal identity number. Supplied together with SIM card. Used to unlock the SIM card. PIN2 Personal identity number 2. Supplied by the operator. Used as special function in protecting FDN which is supported by SIM. PUK Supplied together with SIM card.
unconditionally. If busy Divert your incoming calls while your line is busy. If no answer The network will divert your incoming calls if you don’t answer it in a specific duration when the handset rings or vibrates. If out of reach The network will divert your incoming calls when the network fails to find you handset (switched off or out of the service area). Roaming It means the handset is not used in the area of its local registered network. It includes international and domestic roaming.