Safety and Precautions _________________________________________________ 2 Phone Layout_________________________________________________________ 4 Essential Topics _______________________________________________________ 6 Getting started ________________________________________________________ 7 Basic operations _____________________________________________________ 10 Using the menu ______________________________________________________ 12 Menu option list____________________________________________________
Safety and Precautions Switch off the phone in the vicinity of chemical plants, gas stations and other locations containing explosive objects. Keep the phone away from children. Please switch off your phone as instructed where notices are present. Switch off the phone when boarding on plane and don’t switch on the phone during flight. Please strictly conform to your local legal regulations during a drive.
〈Note〉: This user manual is the operating instructions based on the simple Chinese operating mode, and it is Somewhat different under English operating mode. 〈Warning〉: The original factory will not take any responsibility in the case of noncompliance with the above advices or improper use of the phone. 〈Attention〉: Please send used li-ion batteries to specified locations or return them to our company. Do not dispose of the batteries into dustbins.
Phone Layout Harness hole Earpiece Speaker Recharge jack Mic Screen Main menu Game Calling key Earphone jack SMS Contact list Recent calls Power on/off Audio profiles Standard keypad Phone Bottom Side、Back Side and Front Side Schematic Diagram This handset has totally 20 keys on the keypad. It has 1.4 inches FSTN (or CSTN with maximum 4K colors for colorful display product) screen. Also it has a recharge interface.
Receiving call vibration Preset ringing tone type Desktop wallpaper Call time Speed Dial Date and time display Alarm／Calculator Receiving/Sending short message Games Caller number display* Divert Calls* Call Restrict* Call Waiting* Support 10 ringing tones 5 built-in ones (if with colorful screen) Support Support Support Support Support 3 Support Support Support Support Note: Functions marked with “*” require network or UIM card support.
Essential Topics Communication control keys The key is used for making a call (after a number has been entered); or for viewing recently dialed phone numbers. Maximum 10 numbers can be displayed. The key is used for ending a call (during dialing and communication state), or for exiting menu under menu state to return to standby menu. Pressing and holding this key may switch on or off the phone.
Language and input method Languages supported by this handset are listed under the path [Settings]-Æ[Phone Settings] -Æ[Language]. You can press the key to switch between input methods and press the key to switch to symbol input method. For detailed operation please refer to relevant chapters of “Operation Instruction of Input Methods”.
network provider. With the UIM card, which stores many parameters required for communications, you can use the various functions of the phone and store personal information, including PIN (Personal Identification Number), phonebook, short messages and other additional system services. Please handle the UIM card with care, twisting or pressing it may cause damage. If it is lost, please contact your network operator immediately for help. (Note): The UIM card shall be placed beyond the range of children.
Battery type Standby time Conversation time Li-ion battery 60-120 hours 60－180 minutes Note: Actual time of usage of the battery varies according to different operation modes and settings of network base station. If you use the phone when battery is rather low, the phone may restart or switch off automatically. Please recharge in time. Procedure for battery charging Connect the charger to a main socket, and insert the charging plug into the bottom jack of the phone.
Basic operations Switching on Pressing and holding the key may switch on the phone. It will automatically search the network if the UIM card and the phone have no password protection. After the phone is registered in CDMA network, signal will be displayed at the top left corner of the screen. The phone is now in the standby state and you can make or answer a call. Your phone remains in a searching state if it fails to find the available network system.
If the dialed number is stored in the phonebook, then the name of the called party will be displayed on the screen. To end a call, you can press the key displayed on the screen. . After a call is ended, the call timer stops and the text “Call ends” is Saving a number by dialing You may save the other party’s number with phonebook, or by dialing under standby state. The number saving procedure of the former method is described in details in communication phonebook menu.
interference of ringing tone or vibration. Call recording / Mic mute When the phone is in conversation state, “Mute” and “Menu” are displayed at the bottom of the main screen. Press the left and right-direction key to switch between these two options. , you will be able to turn off the mic in order that the other party When you select “Mute” and press the key cannot hear your voice and you can still hear the other party’s voice (the mic is still on).
corresponding function. The most bottom line of the screen is the description of soft keys, which may prompt you the current function of the soft keys. Menu option list Option Function description Text Messages Write Message The new message can start with Preformats or The Last Written Inbox Message in phone Up to 50 pieces of messages can be stored in the phone. UIM Messages in UIM Number of messages that can be stored in the UIM card depends on its type.
Games Call Barrings Restrict Outgoing, Restrict Incoming Reset Settings OK, Cancel Brick Attack, BlackJack, Video Poker Stop Watch Tools Alarm Alarm clock 1～6 Calculator World Time Correspond to the commonly used time of large cities worldwide Detail Find Grouping View No Partition Group, VIP Group, Home Group, Work Group, Friends Group, Personal Group, Business Group Delete Contact Add New Record Phone, UIM Edit Edit Name, Add Number, Add E-Mail, Add URL, Select Groups, Add Notes Copy/Mo
SMS Message function is a network service. You may be required to subscribe to the service from your network operator prior to sending and receiving short messages. One message can hold up to 160 characters. A message is sent to the SMS center of the network, then to the targeted user by the network. If the targeted user does not switch on his phone, the network will store the message temporarily.
Erase Messages (Entire OutBox): Delete all short messages stored in the inbox. (Entire Inbox): Delete all short messages in the inbox in the phone. (Entire UIM): Delete all short messages in the inbox in the UIM card. (All Messages): Delete all short messages stored in the outbox and inbox. Message Settings (Storage Location): Save the received short message to the phone or UIM card.
Received Calls Save 10 recent received calls automatically. Functional operation and display mode is the same as those of missed calls. Dialed Calls Save 10 recent dialed calls automatically. Functional operation and display mode is the same as those of missed calls. Call Times (Received Calls):Totalize all received calls time since the timer was reset last time. (Dialed Calls): Totalize all dialed calls time since the timer was reset last time.
Unreachable: When someone is calling you and it was not connected, including your phone is power-off or out of service range, the call will be diverted. All Calls: Divert all incoming calls. Cancel All: Cancel all call diverting. Press the up or down-direction key to select the proper condition in the list and then press the key to cancel and return to higher-level menu.
wallpaper menu, press direction keys may browse different wallpapers directly. (Backlight Time): This option provides you different time periods for your selection as the backlight duration time. (Brightness) : This option has seven degrees of backlight brightness for your selection. (Screen Saver): Only available for monochroic screen product. You can select time for screen saver. Sound Settings This set of menu provides users with various functions relevant to sound.
your UIM card. You may also change the PIN code. PIN Check: If “PIN Check” is set on, from then on the system will prompt you to enter the phone’s password when switched on and only when the password is correctly entered can you use the phone. Change PIN: Change the phone’s PIN code via this option. Enter the new PIN code for two time to confirm. The new PIN code will become effective.
Game objective: To get a point closer to but not over 21 than the banker. Game rules: The point for each card is respectively: A: 1 or 11; J, Q and K: 10 for each; points for other cards are the same as the number shown on them. The winner will be the one whose card point is closer to 21 between you and the banker. If card points of both sides are equal, it will be a draw game and no losing and winning.
Press the up and down-direction key to select one of the alarms and press the key the alarm setting. Press the left and right-direction key in the alarm clock setting interface to select alarm clock setting content. You may set the alarm clock’s State, Time, Mode.
After accessing the Add menu, you may select to add a record to your phone or the UIM card. Input name and number after selecting storage location to add the record. If you need to add other information to the record, you can do this in “Edit” menu. Edit (Edit Name): Edit the name of current record. (Add Number): Input number of the record. You can classify numbers as follows: Preference Number, Generic Number, Work Number, Home Number, Mobile Number and Fax Number.
Operation instruction of input methods This handset supports full English.Input methods can be applied to many text input areas such as short message input, name input in the phonebook, standby greetings etc. This handset provides many input methods: Numbers, Multitap, EzText, Symbol etc. Multitap and EzText input method are used for inputting English; Numbers input method is used for inputting numbers; Symbol input method is used for inputting various symbols and special characters.
1.Check if the charger is connected with the phone correctly. Battery cannot be charged Fail to register to the network Can not make a call 2.Check if the charger is connected with the power plug correctly. 3.Is the battery usable? The performance of the battery will degrade after used for several years. 1.The signal is too weak, or there may be some radio interference round. View the signal indicator on the screen to see whether it is empty. 2.
Divert all All incoming calls will be diverted by the network unconditionally. Divert if busy Divert the incoming call while you are already on line. Divert if no answer The network will divert the incoming call if the phone rings or vibrates for a specific time and you haven’t answered it.
