深圳市康冠技术有限公司 SHENZHEN KTC TECHNOLOGY CO.,LTD SPECIFICATION 技术规格书 型号: MODEL NO.: K-AW7603M1 规格: SPECIFICATION: K-AW7603M1(2T2R)WIFI Module 文件编号 DOCUMENT NO: TS21B004 深圳市康冠技术有限公司 SHENZHEN KTC TECHNOLOGY CO.,LTD 拟制 PREPARED BY 审核 CHECKED BY 批准 APPROVED BY 客户承认栏 承认 ACCEPTED BY 审核 CHECKED BY 批准 APPROVED BY 丁胜平 备注:承认盖章后请回复一份承认书(或复印件)给我司,其余由贵公司存档。 REMARKS:Please send us one (or copy )of this approval with stamp after accepting,other copies filed by the customer.
深圳市康冠技术有限公司 SHENZHEN KTC TECHNOLOGY CO.,LTD 修订履历 Revision History 版本/次 Revision V3.0 修改项次 (Description) 初版发行(First issued) 修改日期 (Date) 2021.1.27 V3.1 变更参数 2021.8.
深圳市康冠技术有限公司 SHENZHEN KTC TECHNOLOGY CO.,LTD 目录 1.General Introduction.............................................................................................................................................. 11 2.Features..................................................................................................................................................................... 11 3.Application Diagrams...............................................................................................
深圳市康冠技术有限公司 SHENZHEN KTC TECHNOLOGY CO.,LTD 1.General Introduction 1.1 Introduction ▶K-AW7603M1 is to specify the product requirements for 802.11b/g/n USB Module. This Card is based on MT7603U chipset that complied with IEEE 802.11n,and it is also backward complied with IEEE 802.11b/g standard from 2.4~2.5GHz.It can be used to provide up to 54Mbps for IEEE 802.11g, 11Mbps for IEEE 802.11b and 300Mbps for IEEE 802.11n to connect your wireless LAN.
深圳市康冠技术有限公司 SHENZHEN KTC TECHNOLOGY CO.,LTD 3.Application Diagrams 3.1 Functional Block Diagram 3.2 WiFi RF Specifications 3.2.1 2.4G WiFi RF Specification Feature Standard Frequency Range Channels Modulation Date Rate Detailed Description ● IEEE 802.11b/g/n CSMA/CA ● 2.4~2.4835GHz (2.4GHz ISM Band) ● Ch1~Ch11 (For 20MHz Channels) ● 802.11b (DSSS): DBPSK, DQPSK, CCK; ● 802.11g (OFDM): BPSK, QPSK, 16QAM, 64QAM; ● 802.11n (OFDM): BPSK, QPSK, 16QAM, 64QAM; ● ● ● ● ● ● Frequency Tolerance ● 802.
深圳市康冠技术有限公司 SHENZHEN KTC TECHNOLOGY CO.,LTD -86dBm -90dBm -76dBm -89dBm -71dBm -88dBm -68dBm 802.11b@11Mbps 802.11g@6Mbps 802.11g@54Mbps 802.11n@HT20_MCS0 802.11n@HT20_MCS7 802.11n@HT40_MCS0 802.11n@HT40_MCS7 -10dBm -10dBm -10dBm -10dBm -10dBm -10dBm -10dBm < < < < < < < 8% 10% 10% 10% 10% 10% 10% 4.Electrical and Thermal Characteristics 4.
深圳市康冠技术有限公司 SHENZHEN KTC TECHNOLOGY CO.,LTD 5.INTERFACE DEFINTION Pin No. Name Description Pin No. Name Description 1 2 3 NC GND Host_Wake up Power_EN No connection Ground Wake on wireless LAN(WOWLAN) Power_EN 5 6 7 GND D+ D- Ground D+ D- 8 VCC 5v 4 6.Environmental requirements ◆Relative humidity: <=80%。 ◆Keep the board away form conductor and water ◆In order to avoid damage from PCB,please do not push or pull the board. 7.
深圳市康冠技术有限公司 SHENZHEN KTC TECHNOLOGY CO.,LTD 9. Antenna Product Name: ANT 1/ANT 2 Product drawings Antenna expansion diagram, pink line is turning point.
深圳市康冠技术有限公司 SHENZHEN KTC TECHNOLOGY CO.,LTD FCC Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.