User's Manual
user manual
1 PowerSupplySpecifications
ApplyAAA1.5V*2alkalinebatterytotheremotecontrolbypolarity.
2 Norm
alfunctionofremotecontrol
Theremotecontrolinterfaceincludes13keysand
1indicatorlamp.Theoperationandindicationareas
follows:
3.
Pairingoperation
Longholddownthe keyindicatorlightafter
extinguishing,3secondsaftertheindicator
lightslowlyflashing,waitingforpairing;
Codesuccess:indicatorlights3s,andexitpairingmode,theindicatorlightsout;
Codefailure:timeout30secondsautomaticallyexitcodemode;
EquipmentName:UBTRC‐1"
4.Sleepmodeandwak
e‐up
A. theremotecontrolisconnectedtothehostnormally,nooperationimmediatelyent
ersstandby
(shallowsleep).
B. theremotecontrolisnotconnectedtothehost(unpairedorbeyondcommunicationrange),no
operationfor10secondsintostandby(deepsleep)
C. insleepmode,supporttopressanykeytowakeup.
Note:inshallowsleepmode,pressthebuttontowakeupandrespondtothehost.
5.
LowPowerWarning
A.Vbat<=2.4V,theremo
tecontrol
isinlowpowerstate;underlowpowerstate,thekeyisreleased,
andtheindicatorlampflashes5timestoprompt;
B.Vbat<=2.2V,theremotecontrolisclosedMCU,itisforbiddentocontinuetousetheremotecontrol;
State Operationalcontent Indicatorrelatedstatus
Nochain
status
Clickthebutton Re
dlig
htflashes5times
Longpressbutton Redlig
htflashes5times
Chainstate
Pre
s
sanykeyofremotecontrol,press
Changliang,releaseandextinguish
Theredlightisalwayson
Bluetooth
pairing
Pres
sthepairingkey 3sredlightslowflashing
Matchingsucc
ess Aredlightlasts3sandgoesout
pairingfailure redlight
flashing60stimeoutextinguished
Lowstate
Ifthebatteryvolt
ageoftheremotecontrolleris
lowerthantheratedrequirement(2.4V),press
anykey
Redlightflashes5seconds