NV17 In-Dash Double Din Navigation System DVD | CD | MP3 | MP4 | SD | USB | BLUETOOTH | SMARTLINK | NAVIGATION Operating Instructions
Warnings Thank you for purchasing this product. Please read through these operating instructions so you will know how to operate your model properly. Please keep this manual in a safe place for future reference. Do not change the fuse on the power cord without professional guidance. Using an improper fuse may cause damage to this unit or even cause fire. Only connect the unit to a 12-volt power supply with negative grounding.
Precautions 1. Never disassemble or adjust the unit without any professional guidance. For details, please consult any professional car shop / dealer for inquiry. 2. If the front panel or TFT monitor is dirty, please use a clean silicone cloth and neutral detergent to wipe off the spot. Using a rough cloth and non-neutral detergent such as alcohol for cleaning may result in scratching or decoloration to the monitor. 3.
Contents Before using................................................. 1 Front Panel.............................................. 1 Basic operations......................................... 2 Power on / off.......................................... 2 Parking Brake Inhibit............................... 2 Mute........................................................ 2 Audible beep confirmation....................... 2 Open SOURCE MENU........................... 2 Playing source selection.....................
Before using Front Panel 10 9 1 2 MENU 3 4 5 6 7 8 Notice: The graphics in this manual are for reference purposes only and may differ somewhat from the actual unit. 1. [ ] Button Press to eject a disc. 2. [MENU] Button Press to display the main menu 3. [ ] Button Adjust the brightness of screen. 4. [ / ] Power/Volume knob Rotate to adjust volume. Press briefly to activate the MUTE function. Press again to resume normal sound. Press and hold to turn the unit OFF. 5. Microphone 6. Reset Hole 7.
Basic operations Power on / off Press the [ ] knob to turn the unit on. / The buttons on the front of the unit light up for a moment and the current mode status appears on the LCD. Press and hold the [ / ] knob more than 2 seconds to power off the unit. Parking Brake Inhibit • • • hen the “BRAKE” cable is connected to W the brake switch, the video playback will be controlled by driving status, system setup and input video sources.
Radio mode Tuner Menu 1 Select Radio as Playing Source Touch [Radio] on the main source menu. 4 2 Select One Radio Band 5 6 3 7 8 9 10 11 12 13 14 15 16 Touch the [ ] icon on the user interface to select one radio band among FM1, FM2, FM3, AM1 and AM2. Tune Auto Tuning Press and hold [ ]/[ ] icon on the user interface more than 1 second to seek a higher / lower station. To stop searching, repeat the operation above or press other keys having radio functions.
Radio mode Preset Station RBDS The unit has 5 bands, such as FM1, FM2, FM3, AM1, AM2, and each band can store 6 stations; hence the unit can store 30 stations in total. RBDS (Radio Broadcast Data System) transmits data to the radio which displays information such as station identification, song artist, and song title. RBDS service availability varies with areas. If RBDS service is not available in your area, the following service is not available.
Bluetooth mode Bluetooth technology has the capability to wirelessly synchronize and transfer data among devices. The Bluetooth audio capabilities can be used for mobile phones hands free applications. Bluetooth has many profiles and the unit is compatible with most Bluetooth enabled mobile phones. Before attempting to use the Bluetooth functions on the unit, please make sure your mobile phone supports Bluetooth functions.
Bluetooth mode Making a Call 1. Select Bluetooth function in the home menu. 2. On Option page, see the "Phone Synch" item, and press "Synch" to synchronize the phone book with the BT. If you have many contacts, this may take up to 3-4 minutes. 3. Search for phone number from [Phone Book] or [Call Log]. Or touch the number pad directly to input the numbers, then touch the green icon [ ] to dial. Disconnecting a Bluetooth Device To disconnect one device, touch [Disconnect] icon.
Bluetooth mode Adjust Bluetooth Settings Music Mode 1. In Bluetooth menu, touch [ Options ]. The option menu is displayed. 2. Touch on the selected option to change the setting. 1. Pair your mobile phone to the unit. 2. Touch [BT Audio] on the main menu. 3. Touch the [ ] to start playback. Touch [ ]/[ ] to select track. • [Bluetooth]: To turn the “Bluetooth” function ON or OFF. • [Auto connect]: To turn the “Auto Connect” function ON or OFF .
Playback Load a Disc You can play video, audio or images stored on the following discs: • DVD Video, DVD-R, DVD-RW • VCD • Audio CD, CD-R, CD-RW Note: Ensure that the disc contains playable content. Eject the disc Press the [ ] key on the front panel to eject the disc. When the disc is ejected, the unit switches to the previous source.
Playback Repeat A-B 2. Select a folder, then touch the desired file. 3. Touch the file again to start play. For Picture Files 1. Touch [ ] to display all available picture folders. 2. Select a folder, then touch the desired file. 3. Touch the file again to start play. For Folder Control 1. Touch [ ] to display all available folders. 2. Select a folder, then touch the desired file. 3. Touch the file again to start play. Repeat For DVD/VCD movie disc: 1.
Playback Playback Information Zoom Touch the screen when playing back DVD and VCD discs and the playback information will be displayed on the top area of the TFT. You can zoom in pictures for a close view. 1. When you view pictures, touch the screen to display menu on the screen, if necessary. 2. Touch [ ] to display the 2nd menu. 3. Touch [ ] repeatedly to zoom in the picture. For DVD DVD T:01/08 C:005/012 2 1 3 1. Disc type. 2. DVD Title information.
iPod/iPhone Operations This unit supports only the following iPod/ iPhone models: · iPhone 5s · iPhone 5c · iPhone 5 · iPhone 4s · iPhone 4 · iPod touch (5th generation) · iPod touch (4th generation) · iPod classic · iPod nano (7th generation) · iPod nano (6th generation) · iPod nano (5th generation) “Made for iPod,” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically to iPod, or iPhone, respectively, and has been certified by the developer to meet Apple perform
SmartLink Open the Source Menu and then touch [ SmartLink ] to enter SmartLink menu. Once the touch screen is calibrated, press “System settings” to return to the main SmartLink Connect page. Press “Mobile Home Page” to access your smart phone from the touch screen of the car device. This calibration is performed once per phone when initially set-up. Connect with iPhone About SmartLink By this function, you can synchronize the screen from your smart phone to the car device.
SiriusXM Satellite Radio Operations SiriusXM® RADIO OPERATION Only SiriusXM® brings you more of what you love to listen to, all in one place. Get over 140 channels, including commercialfree music plus the best sports, news, talk, comedy and entertainment. Welcome to the world of satellite radio. A SiriusXM Vehicle Tuner and Subscription are required. For more information, visit www.siriusxm.com.
SiriusXM Satellite Radio Operations Lock Icon - Touch to display the SXM Lock Screen. CHG PWD Icon - Touch to go to the change password screen. Direct Entry Icon - Touch to display the Direct Entry Menu. EQ Icon - Touch to access the Equalizer level settings menu. Switching to SiriusXM® Radio Touch the top left corner of the screen or press the [MENU] button on the front panel to view the Main Menu screen. From the Main menu screen, touch the [ SXM ] icon.
SiriusXM Satellite Radio Operations 3. Touch a category item. A channel list screen appears. 4. Touch a channel to tune to that channel. Touch the or icon to scroll up or down the list. Locking SXM Mature Channels SiriusXM® attaches a label to channels with mature content. The radio recognizes these channels as “Mature”. The Mature Channel Lock option allows you to lock out channels with “Mature” labels.
Other modes Listen to other devices You can connect an external audio/video device to the unit. 1. Connect the external device with the supplied AV cable. 2. Touch the upper left corner to display the main menu. 3. Touch [AV-IN 1] or [AV-IN 2] to access external device. Reset When the unit hangs up, you can reset it. Press [ RESET ] with a ball-point pen or similar tool. Tip When the unit has been reset, all the settings will return to default settings.
Setup Display system 1. Touch the upper left corner to display the main menu. 2. Touch [ ]. The settings menu is displayed. Adjust general settings 1. 2. 3. 4. Touch [ General ], if necessary. Touch to highlight a setting. Touch to display/select an option. Touch blank area of the screen to exit. General settings Options Description USA/China/Japan/Europe/Eur LW/ Select one that matches your location. Radio region OIRT Local Select Local to receive only stations with extremely Sensitivity strong signal.
Setup Adjust video settings 1. Touch [Video]. 2. Touch the option to setup. Video settings Options On Off Parking Description Disable video when driving. Enable video when driving. When in Park “On” mode, the screen will display WARNING information if you play the video. The warning screen will prevent the driver from watching videos for safety. Adjust time settings 1. Touch [ Time ]. 2. Touch an option repeatedly to select: 3. Touch blank area of the screen to exit.
Setup Adjust sound settings 1. Touch [ Sound ]. 2. Touch an option repeatedly to select. 3. Touch blank area of the screen to exit. Audio settings Options On Sub woofer Off 80Hz Sub woofer filter 120Hz 160Hz On DRC Off Description Turn on or off the subwoofer. Select a crossover frequency to set a cut-off frequency for the subwoofer’s LPF (low-pass filter). Turn on or off the Dynamic range control. Adjust volume settings You can set different volumes for different modes. 1. Touch [Volume].
EQ Select preset equalizer 1. Enter the EQ setup mode Touch the [ ] icon in the user interface and the EQ setup interface will display on the screen. 2. Select EQ mode Touch to select a desired acoustical preset option ( User / Flat / Classic / Rock / Jazz / Techno / Pop ). Adjust EQ Parameters To adjust EQ parameters, touch and drag the parameters adjustment bar. [ User ]: Set the desired audio effect. [ Reset ]: Cancel the equalizer function settings.
Troubleshooting What appears to be trouble is not always serious. Please check the following points before calling a service center. Problem Unit can not power on No/low audio output Poor sound quality or distortion Tel-Mute malfunction Unit resets itself when engine is off Warning information is shown at all times Flashing image or interference appears on screen Cause General Corrective action Unit fuse blown. Install new fuse with correct rating. Car battery fuse blown.
Device connections Notes of connection ● This unit is designed to be used in a vehicle with a 12-volt battery and negative grounding. Before installing this unit to a recreational vehicle, a bus, or a truck, make sure the battery voltage is appropriate for this unit to be used, otherwise, install a transformer by professional to convert the output voltage to 12V. ● To avoid short circuit in the electrical system, ensure that the negative battery cable is disconnected before installation.
Device connections Parking brake cable connections Reverse driving cable connections EN - 23
Specifications General Reference Supply Voltage..................................................................... 12V(DC) Operating Voltage Range.........................................................10.8 - 16.0V(DC) Max Operating Current..................................................................................15A Grounding System.................................................................................Negative Dimensions(WXHXD).................................................... 178.
Wiring diagram SiriusXM DVR BUS MIC DVR VIDEO IN SmartLink Radio Antenna CAMERA-IN PARKING PB+ RX GND REVERSE AGND TV-R GND P.CONT GND TX TV-L AV-IN L(White) AV-IN R(Red) VIDEO IN(Yellow) VIDEO-OUT KEY 1 KEY 2 TV-CVBS DGND LINE OUT RL(White) LINE OUT RR(Red) RR+ FR+ FL+ RL+ RR- FR- FL- RL- NC NC P.
CLASS 1 LASER PRODUCT PN：12707500XXXX
