Safety Instruction
Cleaning and Maintenance
Please clean the feeder regularly to keep your pet's health.
When it stas to get diy and a lot of loose food in the food trough, you can remove the food
cover to clean it.
Clean the feeder base containing the control panel with a soft, damp cloth. Do not wet this
pa. Remember not to rinse it directly with running water.
Do not put the product in the dishwasher, otherwise it will be permanently damaged!
Packing List
After opening the product package, please conrm whether the machine is in good condition.
Please check the list to conrm whether the accessories are complete.
The Feeder ×1
The power adapter ×1
Power Cord ×1
User's guidance ×1
Specication
Food Tank Capacity:5L
Power supply: DC 5V/1A power adapter; 3pcs alkaline D Size batteries
Power adapter: AC110-240V input, DC5V output
G.W:1.95KG
Size: 28×17.2×32cm
Safety Instruction
1.Children need to be used in the company of adults;
2.Do not use the feeder for pets who cannot reach the food tray or have physicaldisabilities.
3.Do not immerse the base pa in water, which will damage electronic components such as
control panel.
4.Do not place any foreign objects in the pet feeder.
5.Do not put canned, wet or wet food in the feeder.
6.Do not disassemble the equipment by yourself.
7.Do not modify the pet feeder.
8.lf the equipment has faults or damaged accessories, do not t to repair the pet feeder by
yourself. Contact the seller immediately and solve it.
9.Be sure to unplug the power plug when not using the product or cleaning theproduct.
10.lf the power plug of the equipment is damp, please turn o the power of the socket and do
not t to unplug the power plug
Notice
1.Do not let your pet chew or swallow any accessories. lf you are worried about the power
cord, please buy wire conduit (hard plastic protector) and protect the power cord at the
hardware store.
2.Do not install or put the pet feeder in an exposed place.The temperature should be within the
range of - 10 ℃~40 ℃.
3.Please use alkaline Size D batte for power supply. Do not use rechargeable batteries.
4.Check the batte regularly. If you travel or travel for a long time, be sure to replace the
batte.
5.Do not lift the pet feeder directly with the cover, food bucket and food tray. Hold the base
with both hands to lift and car, while keeping the device in an upright position.
6.Only applicable to d food with a diameter of 3-13mm. Larger foods may get stuck or block
the Food Outlet.
7.Please carefully read and follow all impoant instructions listed on the pet feeder and
package.
Button Description
Manual Feeding Button: sho press to see 1 copy of food. When there is a recording,
play the recording
once at the same time
Recording Button: Long press for 1 second until you hear "di" and sta recording.The
recording
time does not exceed 10 seconds, After you release your hand, you will hear "didi" to indicate
that it has been saved
Lock/Unlock Button: The device will automatically lock without operating for 30
seconds,and the lock light will be on; Under unlock state,long press for 3 seconds the
machine will lock
Reset Button: long press the button for 6 seconds until you hear "di di di"and it restore
the facto settings. The Feeder reset automatically restas
Connection status indicator (white light)
1. Fast ashing: ashing twice in 1 second, WiFi quick connection mode
2. Slow ashing: ashing once eve 3 seconds, AP hotspot network conguration mode
3. Steady light: The network connection is successful
4. Power on and sta: if the network is not congured, it will enter the distribution mode, and
the distribution network indicator will ash white;
Connection status indicator (red light)
Indicates equipment failure, the red light is always on
Remaining grain indicator (white light)
Stead light: Low food remainder
Lock/unlock light (white light)
Steady light: Lock Lights o: unlock
AM light (white light)
When the set time during 0-12 o'clock AM, the AM light will light up, and the real-time time will
also light up at 0-12 o'clock.
PM light (white light)
When the set time during 12-24 o'clock PM, the PM light will light up, and the real-time time
will also light up at 12-24 o'clock.
Time light (white light)
Indicates local real time(The time correspond to the local time zone after network distribution)
Colon light (white light)
Separating colons for time display. beat for seconds
Copies light (white light)
Indicates the number of seings to be seed with the meal
Meal number light (white light)
The device's meal indicator lights up when app sets the feeding plan;The corresponding
indicator lights o after feeding plan is executed, up to 6 meals/day ,all the indicator lights are
on when the time reach 0 o'clock in the morning
Product Image
Front View
1.Button To Open Cover
2.Food Tank Lid
3.Food Tank
4.Control Panel
5.Food Outlet
6.Body
7.Food Bowl
Bottom View
8.Speaker
9.Batte Compament
10.Type-C Inteace
11.Rocker Switch
9
10
8
11
2
6
1
3
4
5
7
00 00
00
Status light
Fault light
Copies light
Surplus grain lamp
AM light
PM light Meal number light
Lock/unlock light
Automatic Pet Feeder
Sma Type
Operation Guide
Please Read the Manual Carefully
Before Using the Product
FCC WARNING
This device complies with pa 15 of the FCC Rules. Operation is subject to the follow ing two
conditions : (1) this device may not cause harmful inteerence, and (2) this device must accept
any inteerence received,inc luding inteerence that may cause undesired operation.
Any changes or modications not expressly approved by the pay responsible for compliance
could void the user's authority to operate the equipment.
NOTE:This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Pa l5 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful inteerence in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful inteerence to radio communications.
However, there is no guarantee that inteerence will not occur in a paicular installation. If this
equipment does cause harmful inteerence to radio or televis ion reception, which can be
determined by turning the equipment o and on, the user is encouraged to t to correct the
inteerence by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit dierent
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technic ian for help.
To maintain compliance with FCC's RF Exposure guidelines, This equipment should be
installed and operated with minimum distance between 20cm the radiator your body: Use only
the supplied antenna.
Note: The surplus grain lamp only suppos products with surplus grain detection function