Instruction Manual

2
3
封底
封面
Precautions for spa machine:
1. The indoor environment where this machine is used must be equipped with leakage protection device and use qualified power
socket.
2. The elderly and children under the age of 13 should use this product under the care of their parents. The following people or those
with the following conditions should not use this product:
(within 30 minutes after meal, excessive hunger, severe physical failure, severe water shortage, high fever, massive blood loss,
hypertension, heart disease, suppurative ulcer, new wound, drunkenness, unconsciousness, menstruation and pregnancy).
3. When using, ensure that the bathtub bubble machine is placed on the plane, and keep a certain distance from the water source. It is
strictly prohibited to use it in places with high humidity.
4. After use, unplug the power plug immediately and remove the connection with the bath bucket to avoid the danger of the water in the
bath bucket flowing back into the machine.
5. When the machine power cord is damaged or other parts of the machine fail, cut off the power supply in time, contact the dealer and
return it to the manufacturer's professional for repair. Do not repair or modify the bathtub bubble machine by yourself.
1. In colder areas, please soak it in warm water for a while before first use, and then open it for
installation after the material becomes soft. Direct opening may damage the bathtub.
2. Please clean the product with warm water for the first time. Do not use corrosive cleaning agents.
3. When injecting water, please inject cold water first and then hot water, or adjust the hot water to the
water temperature suitable for bathing and inject it directly. The maximum water level shall not
exceed one-half according to personal needs.
4. When filling the bathtub with water, do not touch the hot water above 50 ° C, so as not to cause the
air bag to bulge.
5. Infants and children should wear a special collar when using it and use it under the full care of
adults.
6. The water temperature of the bath is generally between 35-42 degrees. It is better to take a bath for
15-20 minutes.
7. Please drain the water after bathing. Please do not store water for a long time to avoid deformation
of the bathtub.
In order to use this product safely and avoid personal injury or property damage to
you or others, please observe the following precautions:
Safety precautions and instructions
Bathtub instructions:
Do not touch sharp
objects in the bathtub
Modification of the
machine is prohibited
Use with care
if you are sick
Children must be
cared for by adults
1
LxHL-3
600W
1W
1
2
3
4
9
10
11
12
5 6 7
8
1 2 3 4
9
10
11
12
220V
110V
400W
1W
pvc
100*43CM
124*43CM
Machine accessories
Twist down the vent pipe on
the machine as a drain pipe
and connect it to the drain of
the bath barrel
If you need to extend the
drainage pipe, please
connect it in this way
Place the bath bucket on the
hard ground easy to drain
and add water.
Connect the machine firmly
with the wave making air inlet
of the bath barrel
If you need to extend the
drainage pipe, please
connect it in this way
Twist down the vent pipe on
the machine as a drain pipe
and connect it to the drain of
the bath barrel
Place the bath bucket on the
hard ground easy to drain
and add water.
Connect the machine firmly
with the wave making air inlet
of the bath barrel
Connect the inflation
connector fitting to the vent
pipe
Connect the breather pipe to
the machine
5
6
7
8
Connect the breather pipe to
the machine
Connect the inflation
connector fitting to the vent
pipe
When installing the shelf,
align the notch on the shelf
with the bath barrel support
frame
Align the inflating accessories
with the air ring to inflate the bath
barrel, and put the air nozzle
cover on the back cover
Connect the two supports as
a whole, and insert the six
supports into the support
port of the bath barrel in turn
Insert 6 shaped rubber strips
in sequence
Slide the connectors on the
support respectively to fix the
shaping strip of the bath
barrel
Slide the connector on the
support to fix the whole bath
barrel shaping strip and
check it
Install the machine and
prepare to inflate the bathtub
Connect the minimum air
pump to inflate the bathtub
back
First inflate the back of the
bathtub
Use the corresponding
inflation head to inflate the
bathtub body in turn
After filling, cover the air
nozzle to prevent air leakage
LXHL-5Installation method of inflatable bathtub
LXHL-4Installation method of support bathtub
Bathtub mat
Bathtub mat
Main functions: bubble oxygen
massage the back of human body,
anion air purification.
Suitable for 1.7m bathtub with 104 jets
Suitable for 1.5m bathtub with 90 jets
Main material
Specification 1
Specification 2
No-load power
Negative ion power
Voltage
Model
Bathtub bubble machine
Main technical parameters:
Supervised by Huizhou City Lingxian Plastic Products Co., Ltd.
Manufacturer: Huizhou Chuanliubuxi Electronic Plastic Co., Ltd
Instruction manual
4
LXHL-3Installation of bubble bath pad
FCC STATEMENT
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received, including interference that may cause
undesired operation.
2. Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used
in portable exposure condition without restriction.
！
warning
This product is not a life-saving appliance. It is forbidden to use it when it is launched into the water.
Infants and the elderly must be accompanied by adults in the whole process when taking a bath with this product.
When installing the water tank, the inflation pipe can only be filled with normal air at normal temperature, which can
be saturated by 80%.
When used with the machine, the indoor environment should not be too humid, and the power supply must be
equipped with leakage protection device.
FCC statement and warning