User's Manual

KB-6121C Bluetooth Keyboard for Galaxy Tab
Folding Leather protective case
Packing Contents:
1.PU Leather Case with keyboard
2.USB Power Charging Cable
3.User Guide
1.0 Product Features:
5.0 Energy Saving sleep Mode
9.0 Special keys on the Galaxy Tab
6.0 Safety Caution
7.0 Cleaning
8.0 Troubleshooting
Step2: Connect the charging cable A port into
USB power or USB Power Adapter.
The “charge” red indicator light will stay on ,when
the keyboard is charging. Once it finished
charging, the “charge” indicator light will turn off.
The keyboard will kick into Sleep mode when it is
inactive for 15 minutes, and the keyboard power
indicator light will go off, To activate from sleep
mode ,just press any key and wait 3 seconds ,the
keyboard will come back on.
1.Keep the item away sharp objects
2.Do not place heavy object on top of the
keyboard
3.Do not Microwave the item
4.Do not force or distorted the keyboard
5.Keep away form oil, chemical or any other
organic liquid.
Clean the silicon keyboard with water, alcohol, or
alcohol based disinfectant
(A) Unable to connect
1.Make Sure the power switch is on
2.Make Sure the keyboard is within the operating
distance
3.Make sure the battery is charged
4.Make sure Galaxy Tab Bluetooth is activate
5.Make sure the Wireless Keyboard is connected
to Galaxy Tab.
6.Make sure the wireless keyboard has been
paired with the Galaxy Tab.
(B). Unable to Charge keyboard
1. Make Sure the USB power cable is connected
properly to the keyboard and the power source
2. Make sure the wall charger is plug into the
power outlet.
Federal Communication CommissionInterference
Statement
This equipment has been tested and found to comply
With the limits for a Class B digital device.
Pursuant to Part 15 of the FCC Rules, these limits are
Designed to provide reasonable protection against
Harmful interference in a residential installation.
This equipment generates usage and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on.
This device complies with Part15 of the FCC Rules. Operation is subject
to the following two conditions: (1)This device may not cause harmful
interference, and(2)This device must accept any interference received,
including interference that may cause undesired operation.
FCC Caution: Any change or modifications not expressly
Approved by the party responsible for compliance could
Void the user's authority to operate this equipment.
IMPORTANT NOTE:
FCC Radiation Exposure Statement:
1.This equipment complies with FCC radiation exposure limits set forth
for an uncontrolled environment. End users must follow the specific
operating instructions for satisfying RF exposure compliance.
2.This transmitter must not be co-located or operating in conjunction
with any other antenna or transmitter.
return to the home screen
options key
lock the touch screen
for iPad
telephone
search key
return to the previous
adjust the devices volume
1.Bluetooth V2.0 interface Standard
2.Operating Distance : 10meters
3.Modulation System: GFSK 2.4G
4.Transmitting Power : Class 2
5.Operating Voltage:3.0-5.0
6.Working Current : <5.0mA
7.Standby Current :2.5mA
8.Sleeping Current: <200µA
9.Charging Current :>100mA
10.Standby time : 60 days
11.uninterrupted working time:45hours
12.Lithium Battery Life :3 years
13.Lithium Battery Specifications :
45 25 47
14.Charging time :4-4.5hours
15.Lithium Battery Capacity :450mA
16.Key Dynamics : 80±10g
17.Key Life : 5 million strokes
18.Operating Temperature :-10℃－+55℃
19.Humidity :20%-50%
Step1: Turn on the power switch. The Power and
Bluetooth indicator light will be on for 5 seconds ,
then the lights will go off.
Step2: Press on the “Connect” button, The Bluetooth
indicator light will be blinking, and the power indica-
tor will be on. The Keyboard is now ready to be conn-
ected to Galaxy Tab.
Step3: Turn on and unlock Galaxy Tab .In Menu mode,
press on the Galaxy Tab “Menu” key, open a list of
options.
Link Button
Power
Switch
“Menu” key
2.0 Keyboard Specification 3.0 Bluetooth Keyboard Pairing
Bluetooth Keyboard Specification and Pairing Instruction
content in this guide is subject to change without prior notice
1.Built-in Wireless Bluetooth 2.0
Silicone keyboard.
2.Stylish protective PU leather Case
designed for Galaxy Tab display
stand for easy viewing
Rechargeable lithium battery lasts
for approximately 45 Hours per
charge.
4.Special home screen key for
one-touch access to variety of
applications.
5.Light weight, quiet keystrokes,
dust proof & spill-proof
6.Energy saving keyboard sleep
mode
Step4: Select the “Settings” icon Wireless and
network Bluetooth settings Select Bluetooth
to activate the Bluetooth feature, and then scan
devices .
Step7: Wireless Bluetooth Keyboard connected
successfully. The connection indicator light will
be off ,But the power indicator light will stay on
until the keyboard is switched off.
Keyboard Layout:
Please note that Android OS has multiple versions
and international key layouts – the standard Sam-
sung keyboard layout may not match the Merlin
Bluetooth Keyboard perfectly.
Third party software that may be downloaded for
free from the Android Market can allow you to
map the keyboard perfectly. Please search and
download the program ‘BlueKeyboard JP’ on your
Samsung Galaxy Tab for better Bluetooth keybo-
ard compatibility.
Step5: Wireless keyboard found .click on the
device to Pair.
Step6: Enter the Password code displayed on
screen. And press “Enter” key.
4.0 Charging
E nter password codeusing the wireless
keyboard
Keyboard connected successfully
When the battery power is low, the “power”
indicator light will start blinking . It is time to
recharge the keyboard.
Step1: Connect the USB power cable to the
keyboard charging interface
Special application:
The wireless keyboard can be connected to
Galaxy Tab, ipad, iphone4G, and iPod Touch
that is installed with iOS 4.0 or later. For other
Bluetooth enabled device, please verify the
Bluetooth standard compatibility before atte-
mpting to connect to the keyboard.