Tablet computer User’s Manual Tablet computer P103E GX-I103E 0
Announcement Dear users: Thank you for purchasing and using our products. For the sake of your safety and interests, before using the products, please carefully read the product specifications as well as all the materials attached to the PC. If you don’t operate and use the products according to the product specifications, we shall not assume any responsibility for any personal harmony, assets or other losses incurred.
Catalogue 1.0 Special notice ................................................................................................ 3 1.1 Special hint ................................................................................................ 3 1.2Please be sure to read the important hints for using Tablet computer........................... 3 1.3 Special notice ............................................................................................. 4 1.5 Instructions on safety .........................
1.0 Special notice 1.1 Special hint In order to facilitate understanding and arouse your attention, as for product safety or information needing special attention to, we will give you the hints in this chapter or the chapters that follows according to the following levels and special warning words.
corrected grounded when using the external power supply. z The power supply should be stable and be free from interference. When you are not clear about the local specifications on electric appliance, please consult your distributors or your local power company. z For the sake of safety, please don’t damage the grounding line of power socket. z When plugging off the power, you should avoid pulling off the electric wire directly by pulling.
Before being used [Warning] After the computer is stored and transported under the environment of lower than 10℃, the computer should be placed for over 2 hours under the room temperature condition of 10℃ - 35℃ before being used in order to prevent the computer temperature from getting excessively low, which thus give rise to electrified damages. Please don’t disassemble the package during the period.
insert and pull these lines & cables. [Warning] You should try not to change the voltage selector switch of the computer power. Any change may lead to personal body harm or damage of equipment. [Note] Carefully examine the AC power line attached when purchasing the computer. In case of any problems, please contact relevant dealer.
2.0Product overview 2.1 Introduction z Product name: Tablet computerP103E z Series and type: GX-I103E z Characteristics of product performance: The Tablet computer adopts the latest mobile computation technology of Intel and has a better performance. z The system allows the upgrading and substitute of EMS memory and HD capacity. When replacing substitute products for capacity expansion, please consult your local distributor or go to designated maintenance department for operation.
NO. NAME NO. NAME NO.
3. 0 Basic common knowledge on computer operation 3.1 Indicator lamp for the system status LED icon & symbol Indicating contents The blue light indicates that system is in running status. The flashing red light indicates that the battery is being charged; The blue light indicates that the battery has fully charged. The blue light indicates that the wireless network card is currently using 3.
Press the backlight mode key, and then pairs up and down keys to adjust of the "-","+" Decreasing the brightness of LCD Press the Volume mode key, and then pairs up and down keys to adjust of the "-","+" Decreasing the sound of speaker Increasing the brightness of LCD Increasing the sound of speaker Volume/backlight mode (- + ) keys to enter the system before (DOS mode), expressed as the direction of the up /down Press twice continuously the Screen rotation / lock key Open or lock the screen rotation
4.0 Setup of BIOS (basic input & output system) In this chapter, we will teach you how to enter the BIOS setup program as well as the setup of control options for all kinds of hardware. You will also learn how to use the setup of the built-in protection. The setup of common program is a hardware status program built in the BIOS of the Tablet computer. It can execute and maintain many hardware functions.
4.2 Main (main setup) System Time: setup of the system time System Date: setup of the system data 4.
4.4 Advanced SATA AHCI Enable: System hard disk mode Panel Motor：Open/close the screen vibration Light Sensor：Open/close the light sensor 4.
4.6 Exit Exit Saving Changes: Save Settings exit Exit Discarding Changes: Do not save your settings exit Load Setup Defaults: Import the default settings Discard Changes: Do not save your settings Save Changes: Save Settings 5.
6. 0 Fault analysis and elimination z z z z In this chapter, you will learn how to solve general problem on hardware. Your Tablet computer must pass a computer test and conform to the system specification before being delivered. However, incorrect operation or negligence during the conveyance process will lead to the occurrence of problems. This chapter will provide reference and identification information for general problems on hardware and software you may encounter.
6.3 Problems on monitor 1) Black screen in case of system booting z z z z Please make sure that the Tablet computer is not in hibernation or standby mode. Under these modes, the monitor will be shut off so as to conserve energy sources. Press the backlight mode "+" key so as to increase the brightness of screen. Press the functional key Fn+F7 to determine that the Tablet computer is not in the mode of only CRT output. Please press the functional key Fn+F8 so as to increase the brightness of screen.
Special Declaration This Tablet computer can support several peripheral devices & hardware, such as mouse, keyboard, printer and scanner. As for the peripheral equipment accompanied with the computer, the computer, the computer doesn’t guarantee the compatibility and reliability of its products. When users use the products, they must conform to the contents in the specifications.
Annex A Product Specifications Intel latest mobile computation technology adopted. CPU Genuine Intel (R) CPU N455 1.66GHz Chipset Intel NM10 System memory DDRIII 2G, Graphics card ： Intel® Graphics Media Accelerator 3150 Panel 10.1 ” LED LCD screen resolution of 1024x600 Card Reader Four-in-one card reader, support SD / MS / MMC / MS-Pro HDD 32G SSD MINIPCI-E interface different capacity of the hard disk LAN 10/100M LAN Wireless network Mini PCI-E wireless card to support the 802.
FCC WARNING： Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
