User's Manual

ManualsBrandsHui Zhou Gaoshengda Technology ManualsElectronicsWIFI Module

PRODUCT SPECIFICATION Version 1.4

IEEE

802.11 a/b/g/n/ac

2T/2R Dual Band

USB Module

Model Number:

WC0F2601

2.4G channel： 1-11

5G channel： 36-48 149-165

客户认可

Custom Approval Section

Custom Name

Department

Approval

Date：

拟制

DESIGN

审核

CHECK

批准

APPROVAL

唐红君陈宇科熊运自

20161010 20161010

20161010

Summary of content (10 pages)

PAGE 1
PRODUCT SPECIFICATION Version 1.4 IEEE 802.11 a/b/g/n/ac 2T/2R Dual Band USB Module Model Number: WC0F2601 2.
PAGE 2
PRODUCTS SPECIFICATION WC0FR2601 Document revision history Revision Date Approved by Remarks Version 1.0 2016-07-11 Draft Version 1.1 2016-07-12 Change 8 PIN to 10 PIN Version 1.2 2016-08-06 Change Mechanical Dimensions 25*45mm to 47*30mm 1、Change function block diagram Version 1.3 2、Change the 5G receive Sensitivity. 3、Change Mechanical Dimensions 2016-09-18 4、Change SMT connector spec 5、Change antenna spec Version 1.
PAGE 3
PRODUCTS SPECIFICATION WC0FR2601 1. General Description This document is to specify the product requirements for 802.11a/b/g/n/ac USB Module. This Card is based on Realtek RTL8812AU chipset that complied with IEEE 802.11b/g/n/ac Draft 3.0 compatible WLAN ,and it is also backward complied with IEEE 802.11a standard from 5.15~5.825GHz wideband and IEEE 802.11b/g standard from 2.4000~2.4835GHz. It can be used to provide up to 54Mbps for IEEE 802.11a and IEEE 802.11g,11Mbps for IEEE 802.
PAGE 4
PRODUCTS SPECIFICATION WC0FR2601 3. Application Diagrams 3.1 Functional Block Diagram 3.2 General Requirements 3.2.1 3.2.1.1 3.2.1.2 3.2.1.3 IEEE 802.11b Section Feature Detailed Description Standard Radio and Modulation Schemes Operating Frequency 3.2.1.4 Channel Numbers 3.2.1.5 Data Rate Media Access Protocol 3.2.1.6 3.2.1.7 Transmitter Output Power at Antenna Connector ● IEEE 802.11b ● DQPSK , DBPSK , DSSS , and CCK ● 2400 ～ 2483.
PAGE 5
PRODUCTS SPECIFICATION WC0FR2601 Receiver Sensitivity at Antenna Connector 3.2.1.8 3.2.2 ● ● Typical Sensitivity at Which Frame(1000-byte PDUs)Error Rate=8% -88 dBm at 1Mbps -82 dBm for 11Mbps IEEE 802.11g Section Feature Detailed Description 3.2.2.1 Standard Radio and Modulation Type Operating Frequency 3.2.2.2 3.2.2.3 3.2.2.4 Channel Numbers 3.2.2.5 Data Rate Media Access Protocol 3.2.2.6 3.2.2.7 Transmitter Output Power at Antenna Connector 3.2.2.
PAGE 6
PRODUCTS SPECIFICATION WC0FR2601 3.2.4 IEEE 802.11n Section 3.2.4.1 3.2.4.2 3.2.4.3 Feature Detailed Description Standard ● IEEE 802.11n ● BPSK , QPSK , 16QAM ,64QAM with OFDM Radio and Modulation Type Operating ● Frequency ● 2.4GHz band:2400 ~ 2483.5MHz 5GHz and:5150 ~ 5825MHZ MCS 3.2.4.4 3.2.4.5 Protocol Transmitter Output 3.2.4.6 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Data Rate Media Access Power at Antenna Connector GI=800ns 20MHz 6.5 13 19.5 26 39 52 58.
PAGE 7
PRODUCTS SPECIFICATION WC0FR2601 3.2.5 5GHz Band/HT20 5GHz Band/HT40 ● -83 dBm at MCS0/8 ● -81 dBm at MCS0/8 ● -68 dBm at MCS7/15 ● -64 dBm at MCS7/15 IEEE 802.11ac Section 3.2.5.1 3.2.5.2 Feature Standard Radio and Modulation Type 3.2.5.3 Operating Frequency 3.2.5.4 Channel Numbers 3.2.5.5 Data Rate Media Access Protocol 3.2.5.6 Detailed Description ● IEEE 802.11ac ● QPSK , BPSK , 16QAM ,64QAM,256QAM with OFDM ● ● ● ● ● ● ● ● ● 5.15~5.35GHz and 5.725~5.825GHz for US and Canada 5.
PAGE 8
PRODUCTS SPECIFICATION WC0FR2601 4. Electrical and Thermal Characteristics 4.1 Temperature Limit Ratings Parameter Storage Temperature Ambient Operating Temperature Junction Temperature 4.2 Minimum -40 0 0 Maximum +80 60 125 General Section Feature Detailed Description 4.2.1 Antenna Type 4.2.2 4.2.3 4.2.4 Operating Voltage Current Consumption Form Factor and Interface ● ANT1: IPEX connector ANT2: Metal antenna ● 3.3V±10% ● ＜1100mA ● High Speed USB2.0 Interface 4.
PAGE 9
PRODUCTS SPECIFICATION WC0FR2601 5. Connector Definition 10-Pin 1.25 mm connector（Horizontal Type） Pin 1 Definition VCC 2 3 4 5 6 7 8 9 10 VCC D- D+ GND WL_Host_Wake Reset GND NC GND (Internal pull-up (Internal pull-up 10K Ohm) 100K Ohm) (3.3V) (3.3V) 6 Mechanical Dimensions *TOLERANCES *UNIT:mm ARE +/-0.5mm UNLESS OTHERWISE SPECIFIED PAGE 9 OF 09 Version 1.
PAGE 10
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.