PRODUCT SPECIFICATION Version 2.0 IEEE 802.11 b/g/n 1T/1R USB Module Model Number: W7LM1110 / W7LM1110A 客户认可 Custom Approval Section Custom Name Department Approval Date: 拟制 DESIGN 审核 CHECK 批准 APPROVAL 朱晓辉 陈宇科 熊运自 2016-11-24 2016-11-24 2016-11- 24 制造商:惠 州 高 盛 达 科 技 有 限 公 司 Manufacturer: HUIZHOU GAOSHENGDA TECHNOLOGY CO.,LTD 中国惠州仲恺高新技术开发区华宇路 75 号 HUA YU RD., NO.75, ZHONGKAI HIGH-TECH DEVELOPMENT AREA, HUIZHOU, CHINA TEL:(0752)2096698 FAX:(0752)2096628 E-mail: zhuxh@gaosd.
PRODUCTS SPECIFICATION W7LM1110 Document revision history Revision Version 1.0 Date Approved by 2016-09-23 Remarks Draft Update:add Schematic diagram add label list &Package add Appendix 4 Update:add FCC ID/IC ID Version 1.1 2016-09-29 Version 1.2 2016-09-30 Version 1.3 2016-09-30 Version 1.4 2016-10-03 Version 1.5 2016-10-11 Version 1.6 2016-10-14 Update:add Appendix 7: PCB Information Version 1.7 2016-10-20 Update:Mechanical Dimensions Version 1.8 2016-10-27 Update:1.
PRODUCTS SPECIFICATION 1. W7LM1110 General Description This document is to specify the product requirements for 802.11 b/g/n USB Module.This Module is based on Media Tek MT7601U chipset that complied with IEEE 802.11g, IEEE 802.11b, IEEE 802.11n standard from 2.4G-2.5GHz,and it can be used to provide up to 54Mbps for 802.11g,11Mbps for 802.11b and 150Mbps for 802.11n to connect your wireless LAN. With seamless roaming, fully interoperability and advanced security with WEP standard, 802.
PRODUCTS SPECIFICATION 3. Application Diagrams 3.1 Functional Block Diagram W7LM1110 DC/DC 3.3V 5V USB Interface Interface Signals MT7601U WL/2.4G/ Tx/Rx Antenna 40MHz XTAL 3.2 Schematic diagram PAGE 4 OF 19 Version2.
PRODUCTS SPECIFICATION W7LM1110 General Requirements 4. 4.1 IEEE 802.11b Section # Feature 4.1.1 4.1.2 4.1.3 Standard Radio and Modulation Schemes Operating Frequency Detailed Description ● IEEE 802.11b ● DQPSK , DBPSK , DSSS , and CCK ● 2400 ~ 2497MHz ISM band ● 11 channels for United States 13 channels for Europe Countries(Default) 14 channels for Japan ● 11,5.5,2,and 1Mbps ● CSMA/CA with ACK ● 4.1.4 4.1.5 4.1.6 4.1.7 4.1.8 4.
PRODUCTS SPECIFICATION W7LM1110 4.3 IEEE 802.11n Section # 4.3.1 4.3.2 4.3.3 Feature Standard Radio and Modulation Type Operating Frequency Detailed Description ● IEEE 802.11n ● BPSK , QPSK , 16QAM ,64QAM with OFDM ● 2400 ~ 2483.5MHz MCS 4.3.4 Data Rate(Mbps) GI=800ns 20MHz 0 6.5 1 13 1 .5 27 2 19.5 4 5 6 7 4.3.5 Media Access Protocol 40MH GI=400ns 20M z 7. 40MHz 15 14.4 3 40.5 21.7 4 26 54 28. 60 39 52 58.5 65 81 108 121.5 135 43.3 57.8 65.0 72.
PRODUCTS SPECIFICATION W7LM1110 5.Electrical and Thermal Characteristics 5.1 EEPROM Information Worldwide Configured by driver Reg Domain Offset 0x38 for 5G:0xFF Offset 0x39 for 2.4G:0xFF Vendor Product ID 0x148F 0x7601 ID 5.
PRODUCTS SPECIFICATION Remarks: Strongly recommend TV least 1A 5.6 5.8 platform has to fulfill output current at Recommended operation conditions for module Symbol VCC 5.7 W7LM1110 Rating 5V supply Min 4.75 Typ 5 Max 5.25 units V DC characteristics WoWLAN Wake Up System Via WiFi,High Active 5.9 Reset Timing SPEC System Reset MT7601u ,Low Active PAGE 8 OF 19 Version2.
PRODUCTS SPECIFICATION 5.10 W7LM1110 Mechanical Dimensions(unit:mm) DIM (MM) Tolerance (MM) 0-5 ±0.15 5-10 ±0.20 10-50 ±0.30 5.11 Pin Description 1.25-8 Pin connector PAGE 9 OF 19 Version2.
PRODUCTS SPECIFICATION Pin Pin Define Description Part List W7LM1110 1 2 3 4 5 6 7 8 GND WoW RESET GND USB_D+ USB_D- VCC VCC GND Wake WLAN RESET GND 5V 5V 序 USB Data+ USB Data- Numb 号 1 IC 2 Type Specification model FP6381A Manufacturer P/N er 1 MT7601U FP6381A MT7601U Manufacturer MTK FITI 3 DC-DC RT8059GJ5/DC/DC 1 RT8059 RICHTEK 4 5 6 7 8 9 10 11 12 13 14 15 Capacitance Capacitance Capacitance Capacitance Capacitance Capacitance Capacitance Capacitance Capacitance
PRODUCTS SPECIFICATION 33 label 1 W7LM1110 15*12.5mm/ pet W7LM1110 (ZHONGSHAN FUZHOU ADHESIVEPRODUCT CO.,LTD) PCB Information PCB UL Certification PAGE 11 OF 19 Version2.
PRODUCTS SPECIFICATION W7LM1110 PCB gerber PAGE 12 OF 19 Version2.
PRODUCTS SPECIFICATION W7LM1110 FCC Requirement changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
PRODUCTS SPECIFICATION W7LM1110 IC Requirement This device complies with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Cet appareil est conforme aux CNR exempts de licence d'Industrie Canada.
PRODUCTS SPECIFICATION W7LM1110 This equipment should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body. (1) user manual Information: The module is limited to OEM installation ONLY The module is limited to installation in mobile or fixed applications. The OEM integrator has to be aware not to provide information to the end user regarding how to install or remove this RF module in the user's manual of the end product which integrates this module.