Specifications
120mm
折后尺寸：120x155mm
工艺：折页
材质：60g双胶纸
颜色：单黑印刷
155mm
1 2 3 4 5 6 7 8 9
A.
123456789
B.
222222222
C.
3865
D.
Forward number sequence
Backward number sequence
Repeat number sequence
38 1965
19 3865
Contain existing code sequence
ITEM
SPECIFICATIONS REMARKS
)
SETTINGS
12345678
Disabled
Disabled
10 times
3 minutes
Master code
Auto lock
Silent mode
Wrong code entry limit
Shutdown time
FACTORY DEFAUlT
Master/User
PIN Code
One-touch Locking
Press any key on
keypad for 2 sec
Rotate the thumbturn
to horizontal position
Rotate the thumbturn
to vertical position
Enable Auto-lock
When this feature is enabled, the lock
will automatically relock itself 30 sec
after being unlocked.
Backup Key
Unlock the door from outside Lock the door from outside
Unlock the door from inside Lock the door from inside
V3.0
正面
背面
折线
切割线
.
Change master code
Function Extension
Bluetooth
Silent mode
Vacation mode
Auto lock
Press
Enter new master
PIN code
Wait for 2 green
lights+2 beeps
1
Wait for 2 green
lights+2 beeps
Enter Master
mode
**
+
Master PIN
code
+
#
New master
PIN code
+
#
Enter same
PIN code
Succeed
2 green light+2 beeps
New master
PIN code
+
#
Add user code
**
+
Master PIN
code
+
#
Press
Enter new master
PIN code
Wait for 2 green
lights+2 beeps
2
Wait for 2 green
lights+2 beeps
Enter Master
mode
New
PIN code
+
#
Enter same
PIN code
Succeed
2 green light+2 beeps
New
PIN code
+
#
Delete user code
**
+
Master PIN
code
+
#
Press
Enter unwanted
user PIN code
Succeed
2 green lights+2 beeps
3
Wait for 2 green
lights+2 beeps
Enter Master
mode
Unwanted
user PIN code
+
#
**
+
Master PIN
code
+
#
Press
Enable beeper Succeed
2 green lights+2 beeps
Disable beeper Succeed
2 green lights+2 beeps
41#
Press
42#
Wait for 2 green
lights+2 beeps
Enter Master
mode
**
+
Master PIN
code
+
#
Press
Enable auto lock Succeed
2 green lights+2 beeps
Disable auto lock Succeed
2 green lights+2 beeps
51#
Press
52#
Wait for 2 green
lights+2 beeps
Enter Master
mode
**
+
Master PIN
code
+
#
Press
Enable vacation mode Succeed
2 green lights+2 beeps
Disable vacation mode Succeed
2 green lights+2 beeps
61#
Press
62#
Wait for 2 green
lights+2 beeps
Enter Master
mode
**
+
Master PIN
code
+
#
Press
Enable bluetooth Succeed
2 green lights+2 beeps
Disable bluetooth Succeed
2 green lights+2 beeps
71#
Press
72#
Wait for 2 green
lights+2 beeps
Enter Master
mode
**
+
Master PIN
code
+
#
Press
Enable network Succeed
2 green lights+2 beeps
Disable network Succeed
2 green lights+2 beeps
81#
Press
82#
Wait for 2 green
lights+2 beeps
Enter Master
mode
V2.0
IC Warning
This device complies with Industry Canada’s
licence-exempt RSSs. Operation
is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference,
including interference that may
cause undesired operation of the device.
This equipment complies with FCC radiation
exposure limits set forth for an
uncontrolled environment. This equipment should be
installed and operated
with minimum distance 20cm between the radiator &
your body.
Cet appareil est conforme aux CNR exemptes de
licence d'Industrie Canada .
Son fonctionnement est soumis aux deux conditions
suivantes :
( 1 ) Ce dispositif ne peut causer d'interférences ; et
( 2 ) Ce dispositif doit accepter toute interférence ,
y compris les interférences
qui peuvent causer un mauvais fonctionnement de
l'appareil.
Ce matériel est complété par une exposition de
rayonnements FCC pour un
environnement naturel. Ce matériel doit être installé
et se faire avec une
distance minimale de 20cm entre les radiateurs et
les autresYour body shop.
This equipment complies with IC radiation exposure
limits set forth for an uncontrolled environment. This
equipment should be installed and operated with
minimum distance 20cm between the radiator &
your body.
FCC Caution
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) this device must accept any interference received, including
interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to
operate the equipment.
Note: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set
forth for an uncontrolled environment. This equipment should be
installed and operated with minimum distance 20cm between the
radiator & your body.