User's Manual

ManualsBrandsHuges Hi-Tech ManualsElectronicsAudio Gateway

Bluetooth headset and audio gateway user guide

Bluetooth headset features

1) Talk Key & Headset indicator light -

To accept/end call; blue/red colors indicating the status of the headset.

2, 3) Volume control button up and down -

Adjust the speaker volume (2 dots volume up, one dot volume down)

4) Microphone -

Voice input for outgoing audio.

5) Ear hook -

Wear the headset on ear.

6) Ear hook –socket - (Back of the headset)

Socket to connect the ear hook to headset

7) Speaker – (Back of the headset)

Listen for incoming audio.

8) Charging port – (Back of the headset)

Plug for charging the battery.

Bluetooth audio gateway features

1. Audio gateway indicator light -

Blue colors indicating the status of the Audio Gateway

2. Pairing Switch -

Switch use to pair the audio gateway with headset.

3. Charging Port -

Contacts for charging the battery.

4. Audio Connector -

Plug into your phone to connect the headset and phone together.

5. Cradle Clip -

A fasten clip to your belt or clothes.

Introduction

This bluetooth headset and audio gateway are light weight wireless system utilizing bluetooth wireless

technology. The headset contains a microphone and a speaker; it’s for hands free communications with

mobile phones. While the audio gateway provides a linkage between the non bluetooth phone and bluetooth

headset. The headset and audio gateway’s power are provided by integral rechargeable battery.

Before use the headset, please make sure you:

1. Fully charge headset & audio gateway over night before you use it the first time.

2. Make sure that you pair the headset with audio gateway before you start making calls.

2 3

Summary of content (7 pages)

PAGE 1
Bluetooth headset and audio gateway user guide Bluetooth headset features 2 3 4 7 6 5 4 1 8 1) Talk Key & Headset indicator light To accept/end call; blue/red colors indicating the status of the headset. 2, 3) Volume control button up and down Adjust the speaker volume (2 dots volume up, one dot volume down) 4) Microphone Voice input for outgoing audio. 5) Ear hook Wear the headset on ear.
PAGE 2
What's in the package? 1. One bluetooth headset. 2. One adaptor 3. One bluetooth audio gateway 4. One hanging string 5. One user guide Choose right or left ear wearing style Headset can be worn on either ear by adjust the ear hook. Note: The ear hook can plug into the socket by either side of the headset. Please see below. Important: Please follow the below picture arrow angle to insert the ear hook, avoid vertical insert.
PAGE 3
. Pairing the headset to the audio gateway Before you can pair your headset you need to put it into pairing mode. Pairing mode can only be entered from the power OFF state of the headset. During pairing, it is recommended that the headset and audio gateway distance is as close as possible with no solid objects in between. To proceed pairing the headset with the audio gateway, please follow this guide: A. Ensure headset is switched off. B.
PAGE 4
1. 2. 3. 4. 5. Ensure your headset is turn ON, and audio gateway connected to phone correctly. Place the headset on your ear in the desired wearing style. Using the phone's keypad, dial the phone number. To send the call, press the phone's SEND/CALL key the phone initiates the all. The call will then transfer automatically to the headset when connection is made. Ending a call from the headset To end a call; when wearing the headset press the headset's Talk button.
PAGE 5
Standby mode Low power Pairing mode Pairing successful No LED indication for power saving LED flash once per sec. LED flash 3 times per sec. LED off Audio indicator chart Headset state Volume button Incoming call Low battery Initiate voice dial Audio indication Repeated single tone when the button either lower or upper is pressed. Ring tone DO-LU-DO-LU-DO tone every 40 sec. Headset rings as cell phone default sound Bluetooth audio gateway specification Bluetooth complianceBluetooth 1.
PAGE 6
are not permitted to make changes or modify the device in any way. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
PAGE 7
Federal Communications Commission (FCC) Statement 15.21 You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. 15.105(b) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.