Instructions / Assembly

ManualsBrandsHuffy ManualsCycling GearGreen Machine 360 6-Volt Ride-On for Kids

www.hu ybikes.com/home/globalcontact/

for current contact information / pour les informations de contact actuelles / para obtener la

información de contacto actual

 USA 

PLEASE - BEFORE RETURNING TO STORE:

Contact Hu y Customer Service.

We are glad to assist you

with any parts or assembly problems you might have!

For Fast Customer Service and email:

www.hu ybikes.com/contact

To Order Parts:

www.hu ybikes.com/parts

OR TEL: 1 800 872 2453 (US)

 CANADA 

PLEASE - BEFORE RETURNING TO STORE:

Contact Hu y Customer Service.

We are glad to assist you with any parts or assembly problems you might have!

AVANT DE RETOURNER AU MAGASIN :

Communiquez avec le service à la clientèle de Hu y.

Nous vous aiderons

volontiers avec tout problème concernant les pièces ou le montage!

For fast customer service in Canada / Pour un service à la clientèle rapide au Canada :

Call / Appelez : 1-800-872-2453

Or Email / Ou Courriel :

hu ycanada@hu y.com

Or visit / Ou visitez : : www.hu ybikes.com/global-contacts

[ MÉXICO ]

ANTES DE DEVOLVER EL PRODUCTO A LA TIENDA:

Comuníquese Con Servicio Al Cliente De Hu y.

Nos Complace Ayudarlo Con

Cualquier Parte O Problema De Ensamblado Que Pudiera Tener.

Para obtener Servicio al cliente rápido, visite:

www.hu ybikes.com.mx

Contáctanos por WhatsApp al 222 422 4955

Visita nuestra página de Facebook Hu yMexico

O LLAME AL TEL:

800 1 HUFFY 1 (800 1 48339 1)

(Mexico only)

Para comunicarse por correo electrónico:

servicio.mexico@hu y.com

For ASSEMBLY Help:

Aide à l’ASSEMBLAGE :

Ayuda de la ASAMBLEA:

Please REGISTER your Product:

Veuillez ENREGISTRER l’article :

Por favor, REGISTRE su producto:

This manual contains important safety, assembly,

operation and maintenance information.

Please read and fully understand this manual before

operation.

Save this manual for future reference.

Always wear approved helmet and safety equipment when

using this product.

See back page for Customer Service Information

Date Code Label

Here

H-GM360 EN 09-28-20 m0456

360 Battery Ride-on

Owner’s Manual

Summary of content (12 pages)

PAGE 1
H-GM360 EN 09-28-20 [ USA ] m0456 Date Code Label Here PLEASE - BEFORE RETURNING TO STORE: Contact Huffy Customer Service. EN We are glad to assist you with any parts or assembly problems you might have! For Fast Customer Service and email: To Order Parts: 360 Battery Ride-on www.huffybikes.com/contact www.huffybikes.com/parts Owner’s Manual OR TEL: 1 800 872 2453 (US) [ CANADA ] PLEASE - BEFORE RETURNING TO STORE: Contact Huffy Customer Service.
PAGE 2
Safety and Warnings....................................................................................................2-5 Assembly...............................................................................................................................6-13 Operation and Charging ....................................................................................... 14-17 Maintenance Repair and Service ................................................................... 18-20 Troubleshooting............
PAGE 3
BEFORE YOU CALL SUPPORT: Here are basic, common sense safe riding practices you should read aloud to your child and anyone who may use the vehicle. 1. 2. 3. It is the responsibility of the adult to educate the child, determine if they are fit to operate the vehicle, and supervise use. • • 4. 5. • 6. • 7.
PAGE 4
Troubleshooting Guide ALWAYS WEAR YOUR HELMET WHEN RIDING THIS PRODUCT! Always read the user manual that comes with your helmet to make sure it is fitted and The following are examples of potential problems. Completely read through this manual and the troubleshooting guide table before calling. If you still need help resolving the problem please contact Customer Service. NOTE: Vehicle should be turned off and fully changed before doing troubleshooting.
PAGE 5
Drive Motor Battery Maintenance Battery Fuse The drive motor circuit features a thermal fuse that will automatically trip and cut all power to the vehicle if the motor, electric system or battery is overloaded. The fuse will reset and power will be restored after a short time. If the thermal fuse trips repeatedly during normal use, the vehicle may need repair.
PAGE 6
Replace Drive Battery: Parts View Maintenance 5 4 6 Parts View A B 8 7 2 1 3 C STEPS: Remove Seat. Disconnect the Red and Black Battery Terminals. Remove the battery bracket and screws . Carefully remove the battery. Place the old battery in a plastic bag. Install a replacement battery (same as original equipment) Reconnect the Battery Terminals - Red to Red, Black to Black. Replace the battery bracket and screws . Reinstall Seat. Wipe the battery with a dry cloth prior to storage.
PAGE 7
18 Bumper and mounting screws (x2) Front Cowling and Front Mounting Screw Controller Assembly Grips (pair) Battery Charger 8 9 10 11 12 13 Parts List Drive Motor (x2) Caster Wheels (x2) and mounting screws (4 each caster) 7 Right Fender Left Fender Seat and mounting screws (x4) Rear Axle Drive Wheel (x2) 2 3 4 5 6 Body 1 engage the gears and the vehicle will not run. • Ensure the battery bracket is securely in place before use. • Store the vehicle indoors.
PAGE 8
Steering the Unit Turning: This Owner’s Manual may be made for several different style products. • Some illustrations may vary slightly from the actual product. • Follow instructions completely. • If the product has any parts that are not described in this manual, look for separate “Special Instructions” that are supplied with the unit. • All features, components and accessories are not included on all models. • Use the Index page to locate specific sections of this manual.
PAGE 9
Installing Drive Wheels: Operation C D C B E B Assembly Steering the Unit - Forward and Reverse: F A F Move both Control Grips FORWARD to move FORWARD STEPS: Move both Control Grips BACKWARDS to move BACKWARDS NOTE: BEFORE STARTING, CUT PLASTIC TIES AT EACH MOTOR. 1. 2. 3. 4. A B Insert Motor Ends so wires and Motor are inside Body Holes and Axle holes line up.
PAGE 10
Charging the Drive Battery: Assembly B A IMPORTANT! STEPS: Check the drive battery and charger (supply cord, connector) for wear and damage before charging. Do not charge the battery if damage has occurred. Only replace with the same type and voltage rechargeable battery and charger supplied by the manufacturer. • Only use the rechargeable battery (or equivalent replacement) and charger supplied with your vehicle. • Always turn power off and charge battery after riding.
PAGE 11
Operation - General: Installing Control Cowling: 1. 2. A Toggle Power Switch ON to turn power on. Turn Power Switch OFF to turn power off. B A B Assembly Operation Turning Unit On: A D Steering Unit: B • Use Control Grips to move unit Forward, Backward and Left and Right. • See Steering section for detailed instructions. C Seat Belts: Adjustment: STEPS: A • Adjust Strap Buckles and to securely and safely fit child. • CAUTION: Ensure Straps are OVER child’s shoulders.
PAGE 12
Connecting Drive Battery: Installing the Fenders: A Assembly Assembly R B A L STEPS: STEPS - Note - Fenders are marked (R) (right) and (L) (left): NOTE: Battery is located under Seat. 1. 2. Position each Fender so that Tabs line up with mounting Slots Press firmly and evenly until all Tabs snap into place. A. A to Red Battery Terminal as shown. 1. With seat removed, firmly attach Red Connecter 2. NOTE: Black Connector is attached by factory.