Huf Hülsbeck & Fürst Technical Description and User’s Manual of the HUF14632 Door-Handle with NFC Technical Description and User’s Manual of the Door-Handle with NFC Model: NFCTGSAU380 Contents MPD-DSEU Bitirim Page 1 of 9 21-12-2018
Huf Hülsbeck & Fürst Technical Description and User’s Manual of the HUF14632 Door-Handle with NFC 1 General description of the door-handle ..................................................................................................... 3 1.1 Lock sensor ......................................................................................................................................... 3 1.2 Unlock sensor ..............................................................................................
Huf Hülsbeck & Fürst Technical Description and User’s Manual of the HUF14632 Door-Handle with NFC 1 General description of the door-handle The NFC-Reader NFCTGS is also equipped with two Cappacitive sensors that enables authorized users to lock or unlock the car by using the sensors or with the released NFC-Device for the vehicle. 1.1 Lock sensor 1.2 Unlock sensor 1.
Huf Hülsbeck & Fürst Technical Description and User’s Manual of the HUF14632 Door-Handle with NFC 1.4 Communication Interfaces Following picture shows a simplified diagram of the system. ECU KeylessGo-ECU Electronic with NFC Door-Handle (driver’s door) The door-handle communicates with the Electronic Control Unit (ECU) by using one-wire interface and with the NFC-Device by using Near Field Communication.
Huf Hülsbeck & Fürst Technical Description and User’s Manual of the HUF14632 Door-Handle with NFC 3 Technical data 3.1 Electrical characteristics 3.1.1 Operating voltages - Operating voltage range: - NFC operating voltage range: - CAN operating voltage range: - Test voltage for EOL: +Ubat = 9V ± 2% to 16V ± 2% DC +Ubat = 8V ± 2% to 16V ± 2% DC 6,5V ± 2% ≤ +Ubat ≤ 18V ± 2% DC +Ubat = 12V ± 2% DC 3.1.2 Connector definition 3.1.
Huf Hülsbeck & Fürst Technical Description and User’s Manual of the HUF14632 Door-Handle with NFC 3.2 General NFC specification Standards: ISO 14443-A ISO 14443-B Communication role: Proximity Coupling Device (PCD) Anti-collision support: Yes Communication range: ≤ 3cm approx.
Huf Hülsbeck & Fürst Technical Description and User’s Manual of the HUF14632 Door-Handle with NFC 4 Declaration of Conformity, product Label 4.1 Radio equipment authorization to FCC in USA FCC ID: YGONFCTGSAU380 The transmitter will be supplied as an original equipment device to the car manufacturer. According to 47 CFR 15.19 (labelling requirements) the car manufacturer will print the following text in the appropriate User’s Manual of the car: This device complies with Part 15 of the FCC Rules.
Huf Hülsbeck & Fürst Technical Description and User’s Manual of the HUF14632 Door-Handle with NFC 4.3 Location of product label The labelling with radio certification marks, the product model and the manufacturer logo, country code and control identification data can be found at the door-handle.
