HCM-2 Camera Wall Mount - Large Base Set Up Guide Rev 1.
1) Qty 1 - Small Wall Mount 2) Qty 1 - 1/4 20 x 3/8” 3) Qty 2 - 1/4” washer 4) Qty 4 - #10 x 1 1/4” screws 5) Qty 4 - #10-12 x 1” conical plastic anchors 6) Qty 4 - #6-32 x 1” screws 7) Qty 4 - #6 washers Rev 1.
STEP 1. For masonry or drywall wall: Position on wall and mark wall for anchor placement. Pre-drill 1/4 holes, minimum 1 deep. For double gang electrical box: Position over box with slots overlaying device mounting holes in box. STEP 2. For masonry or drywall wall: Place included anchors in wall and mount to anchors using included #10 screws. For double gang electrical box: Mount to box using #6 screws and washers provided. STEP 3.
Rev 1.
