ZINO MINI PRO 《 User Manual 》 V2.
DI SC LA I M E R & WARN IN G All users must read product operating instructions and liability disclaimer before using and operating any HUBSAN products. By using a HUBSAN product(s), users accept the terms and conditions of HUBSAN liability and operational guidelines. This product is not suitable for minors under 14 years of age.
IM P O RT A N T SAF ETY IN FORMATI O N OPERATION Be extremely cautious and responsible when using the aircraft. Small electronic components can be damaged due to crashes or exposure to moisture / liquid. To avoid any injuries, do not use the aircraft with damaged components. MAINTENANCE Do not try to open or repair the units by yourself. Contact HUBSAN or HUBSAN authorized dealers for service. For more information, please visit the official website at www.hubsan.
HUBSAN Safety Notice for Intelligent battery ● If you do not plan to use the product for a long period of time, make sure to discharge the battery to 60% power. If the battery is more than 60%, the battery will automatically discharge to 60% after a week. Maintaining and storing the battery with 60% power can increase battery life. ● Please use only HUBSAN chargers or HUBSAN Charging Hub for battery charging. ● Discharge the battery at 5C current or below.
Contents Disclaimer Important safety information Battery use precautions 4 Aircraft Functions 1 Aircraft 1.1 Aircraft Spare Part 1 1.2 Aircraft Battery 3 4.1 Flight Control Mode 16 4.2 Aircraft Indicator 17 4.3 Return-to-home(Rth) 17 4.4 Landing Apron Search 19 19 1.2.1 Aircraft Battery Charging 3 4.5 Optical Flow Vision System 1.2.2 Aircraft Battery Installation 4 4.6 Flight Mode 20 1.2.3 Intelligent Battery Functions 4 4.6.1 Headless Mode 20 1.2.
1.Aircraft 1.
12 11 11 Bind button 12 Battery buckle 13 14 15 13 Low-altitude infrared altitude hold system 14 Downward Vision System 15 Aircraft flashlight Note:The aircraft will generate heat when it is running, after the flight, please Avoid direct skin contact with the bottom heat sink and the metal motor housing.
1.2 Aircraft Battery 1.2.1 Aircraft Battery Charging Aircraft Lithium Battery Capacity: 2400mAh, 7.2V lithium 2S intelligent battery, the standard version does not come with a charger, so consumers can charge it with an ordinary cell phone charger, and the charging time with a 9 V / 2 A charger is about 2 . 5 hours. ① With the intelligent flight battery off, plug the charging adapter into the intelligent battery connector.
1.2.2 Aircraft Battery Installation 1 2 Take a fully charged battery Insert the battery into battery compar tment, while pressing the left and right edges behind of the batter y (As shown in illustration) push in, until the battery buckles are fully locked. You should hear buckle locking sound 3 Batter y top should be flush with aircraft back that confirms battery is in place. 1.2.
(6) Over-discharge Protection: Discharging stops automatically to prevent excess discharge. (7) Short Circuit Protection: The power supply is automatically cut if a short circuit is detected. (8) Battery Cell Damage Protection: HUBSAN App displays a warning message when a damaged battery cell is detected. (9) Hibernation Mode: When the battery is on and is left unused for over 20 minutes, the battery will turn off the output after 20 minutes and will enter into a non-working state to maintain the power.
1.2.5 Precautions For Battery Be sure to fully charge each time before using the Intelligent Battery. Charge the intelligent battery only with Hubsan supplied power adapter and intelligent charging modules. (1) After each flight, battery temperature maybe higher. Allow Intelligent Battery to cool down to normal room temperature before charging. (2) The charging temperature range of the intelligent battery is 5 ° C to 40 ° C.
2. Remote Controller（America Mode 2） 2.
2.2 Remote Controller Features S/N Key / Switch Function (1) Throttle / Rudder Stick ( Mode 1 ) Move the stick forward or backward to ascend or descend the drone. Move the stick left or right to rotate the drone Clockwise or counter clockwise. (2) Elevator / Aileron Stick ( Mode 1 ) Move the stick forward or backward to fly the drone forward or backward. Move the stick left or right to fly the drone left and right.
S/N Key / Switch Function 10 Custom keys Long press the Fn+ wheel to adjust the zoom function. Press and hold the Photo+ wheel to adjust the brightness of the remote control screen. The remote control buzzer beeps when a low battery is triggered or Return to home is activated. Press the Fn button for 1.5 seconds, to stop beeping prompts. Long press the Fn button again 1.5 seconds to restart the beeping prompts.
2.
2.5 Remote Control Antenna Angle (1) Adjust the angle of the remote control antenna and try to face the flight direction of the aircraft as much as possible. (2) Long-distance state, the distance between the two antennas is properly tightened to maintain the antenna directivity. (3) Closer Sate, the two antennas are properly separated to maintain a wide receiving range. (4) Do Not Form an occlusion or cross between the antennas. 2.
3 Flight 3.1 Download The X-HUBSAN 2.0 App Before flying, download and install the X-HUBSAN 2.0 APP. Download the APP for free by scanning the code at right or search in APP Store (IOS) Or Goggle Play. X-HUBSAN 2.0 3.2 Main Interface Guide Flight Status Sport Mode Switch Home Page Remote Aircraft Aircraft FPV Battery Motor (Video) Control GPS Status Signal Signal Signal Level Not Connected N Flight Mode 100% Camera Setting Headless On / Off Gimbal Pitch Location 1.
3.3 Pairing The Aircraft To use the aircraft for the first time, you need to activate the aircraft first : ① Press battery switch to power on the aircraft. ② Press the remote control switch to connect to the mobile phone, and wait for the remote control to connect the aircraft in success. ③ Open the mobile phone X-HUBSAN 2.0 APP, it will automatically jump out of the activation interface.
3.4 Aircraft Calibration 3.4.1 Horizontal Calibration During the flight, if the drone shows a significant horizontal deviation, please land and disarm the drone. place the drone on a perfectly leveled horizontal ground. Enter the APP setting interface, select horizontal calibration. Drone will automatically perform the calibration, the four heading lights will flash, and it will stay on after the calibration is completed. Do not move the aircraft during calibration.
3.5 Starting/Stopping the Motors Motor starting condition (1) The aircraft, remote control, and mobile phone have been connected successfully ; (2) The aircraft compass has been calibrated (APP doesn't prompt to calibrate the compass) ; (3) The aircraft must be placed on a horizontally leveled ground ; (4) Aircraft has not locked sufficient GPS satellites for positioning.
4 Aircraft Functions 4.1 Flight Control Mode Flight Control Mode (The flight controller monitors the GPS signals and switches to the corresponding flight modes) GPS Mode Use GPS and downward vision positioning system to achieve precise hovering, stable flight, intelligent flight mode, etc. The vision system works in a well-lit environment . Optical flow mode this mode works indoors only if the altitude is less than 5 meters. more than 5 meters altitude requires the GPS mode or Attitude mode.
4.
RTH-Process 1. Ensure the "home" point is recorded. 2. Press the return to home icon 3. The aircraft will adjust its direction. 4.
4.4 Landing Apron Search When the aircraft is landing or returned to a height of about 10 meters from the ground, it will automatically enter the search for the drone apron function. Connected N 100% 1.0x 45.877503 , -106.123984 SPEED 0.0M/S 45.877503 , -106.123984，65m H: 0.0m D: 0.0m (1) The gimbal camera points downward to optically search for the Aircraft parking apron [H], Apron requirements: 1 Sharp contrast, 2 white "H" lettering, 3 Apron without obstruction.
Note (1). The Vision Systems work best with adequate lighting and clearly marked or textured obstacles. It is not designed to completely replace the pilots controls and judgement, please pay attention to the aircraft and HUBSAN APP tips, and do not rely too much on the Visual systems. (2)The vision system cannot be used normally in scenes where the ambient light is too bright, too dark, specular, water, reflective, sparsely textured, etc. (3)The best working range of the downward vision system is 0.
4.6.2 Creative Video Panorama Photography: (1) Select the direction of rotation (clockwise / counterclockwise); (2) Set the rotation angle, the range of rotation angle (90 ° -360 ° ,accuracy 1°); (3) Set the rotation speed (1-30 ° / sec, accuracy 1); (4) Click GO, the aircraft rotates in place hovering at its position, shooting a video during the rotation; (5) you can click the exit button any time to exit the mode and save the video. Connected N 100% 1.
4.6.3 Orbiting Tap on "Mode Selection" then "Orbit Mode" to set the current location or the position of the mobile device as the center. During Orbit mode, you can adjust the speed and direction by moving the control stick left and right and adjust the orbit radius by moving the control stick forward and backward. Connected N 100% Normal Mode Waypoint Mode Orbit Mode 1.0x Follow Mode Creative Video 45.877503 , -106.123984 SPEED 0.0M/S 45.877503 , -106.123984，65m H: 0.0m D: 0.0m 4.6.
4.6.5 Line Fly Mode Tap on "Mode Selection" then "Line Fly Mode".Set the angle,distance and speed of the aircraft. Performance requirements: 1. Set the angle (0 ~ 360 °, accuracy 1 °); Set the distance (10-6000 meters, accuracy 1 meter); Set the speed (1-8 m / s, accuracy 0.1); 2. Once setup is complete, the aircraft will execute Line Fly mode. During the flight, pilots can take photos or videos manually , or pause / resume / stop the flight at any time. During the flight, you can control the altitude only.
4.6.7 Hyperlapse When you choose Hyperlapse mode，you can choose free and Circle. Hover mode N 100% 1.0x free time-lapse surround time-lapse Free The aircraft will take a certain number of photos and compose time-lapse videos automatically according to the parameters set. During the process of shooting, the user can control the flight of the aircraft freely.
Circle The aircraft will take a certain number of photos and compose ti me-lapse vi de o au tom ati cal l y according to the ci rcl e point of interest and the parameters set. During shooting, moving any sticks on controller will automatically quit the task. (1) select circle. (2) set the shutter interval, video length and maximum flight speed. (3) set the circle direction, and position the circle center by adjusting the circle radius and the direction of the aircraft nose. (4) click‘ GO’and start shooting.
4.7 Gimbal Pitch Adjustment Please make sure there are no stickers or impurities on the gimbal before take off, and place the aircraft on flat and open ground. Please do not bump the gimbal after the power is turned on. The gimbal contains precision parts. If it is hit or damaged, the precision parts will be damaged, which may cause the performance of the gimbal to decrease. Please take good care of the gimbal and camera from physical damage.
Transmitter Adjustment You can adjust the angle of gimbal pitch by fiddling with the control thumb-wheel of gimbal pitch. FAQ 1.The mobile device and remote control cannot be connected (1) Check whether the status of the APP control signal icon has changed (2) For USB Settings on android phones, check out "Android phone connection tutorial" 2. Aircraft WIFI not available. (1) Restart the drone, remote control and X-HUBSAN 2.0 APP (2) Update the aircraft firmware 3.
6.The battery cannot charge Re-plug the charger and battery 7. short flight times Battery overcharge or high temperature environment can easily lead to reduction of battery life, it is recommended to keep the remaining 60% or so, full charge again before use 8. The tilt Angle of the gimbal is too large or the gimbal show abnormal behavior (1) Restart the aircraft and re-calibrate the gimbal (2) Check on the APP to see whether the gimbal status is normal 9.
Limitation of Liability HUBSAN accepts no liability for damages, injuries or any legal responsibilities directly or indirectly from the use of HUBSAN products under the following conditions: 1.Damages, injuries or any legal responsibilities when users are drunk, under the influence of drugs or anesthesia, dizzy, fatigued, nauseous and / or affected by other conditions both physical and mental that could impair sound judgment and / or personal ability. 2.
12. The acquisition, through use of HUBSAN products (specifically but not limited to aircraft), of any data, audio, video that results in infringement of law and / or rights. 13. Misuse and / or alteration of batteries, product / aircraft circuits, hardware protections (including protection circuits), RC model and battery chargers. 14.
FCC INFORMATION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Please read the operating instructions carefully before use! ●Never leave units unattended when charging ●Unplug the charging cable immediately after charging ●Propellers may cause injury ●This product is not a toy ●Not suitable for children under 14 years of age Flight Academy Product name: ZINO MINI PRO Product Standard Number:Q / HBS 001-2017 Vendor: Shenzhen Hubsan Technology Co.
