Zino 2 《User Manual》 V2.
DI SC LA I MER & WARN IN G All users must read product operating instructions as well as this liability disclaimer before using any Hubsan product. By using a Hubsan product(s), users are accepting the terms and conditions of Hubsan liability and operational guidelines. This product is not suitable for minors under 14 years of age.
I M P O R T AN T SAFETY IN FORMATI O N OPERATION Be extremely careful and responsible when using the aircraft. Small electronic components can be damaged due to crashes or exposure to moisture / liquid. To avoid any injuries, do not use the aircraft with broken or damaged components. MAINTENANCE Do not try to open or repair the units by yourself. Please contact Hubsan or Hubsan authorized dealers for service. For more information, please visit the official website at www.hubsan.com.
HUBSAN AIRCRAFT USES SMART BATTERY ● If you do not plan to fly the aircraft for a long time, store the battery ~50% charged to maintain battery performance and life. ● Please use Hubsan chargers for battery charging. ● Discharge the battery at 5C current or below. To avoid discharge related battery damage, do not prolong the discharge time. ● Do not charge on carpet to avoid fire. ● Batteries need to be recharged if unused for over 3 months. 1. Do not disassemble or reassemble the battery. 2.
Contents Disclaimer Important safety information Battery use precautions 3.5 Staring/stopping The Motors 15 4 Flight Controller 16 4.1 Flight Control Mode 16 1 Aircraft 1 4.2 Flight Orientation Indicator 1.1 Aircraft Spare Part 1 ( Single-color Lamp) 16 1.2 Aircraft Battery 3 4.3 Eturn-to-home(Rth) 17 1.2.1 Aircraft Battery Charging 3 4.4 Search The Drone Apron 18 1.2.2 Aircraft Battery Installation 3 4.5 Flight Mode 18 1.2.3 Intelligent Flight Battery Function 4 4.5.
1.Aircraft 1.
13 14 15 12 16 12 Intelligent Battery 14 Battery power switch 13 Battery level indicator 15 Battery buckle 16 Auxiliary altitude hold system Rear LOGO 2
1.2 Aircraft Battery 1.2.1 Aircraft Battery Charging Aircraft Lithiun Battery Capacity: 3800mAh, 15.2V lithium battery equipped with a standard charger,charging time is about 110 minutes. ① Connect the power adapter to AC power (100V-240V, 50-60Hz).
1.2.3 Intelligent Flight Battery Function (1) Power display: The battery has a power indicator, which can display the current battery power. (2) Battery storage self-discharge protection: After the battery is fully charged and stored for 10 days without any operation, the battery will automatically turn on the self-discharge mode to protect the battery (there may be slight heating during discharge). (3) Balance protection: automatically balance the battery cell voltage to protect the battery.
1.2.4 Precautions for Low Temperature (1) If the battery is used in a low temperature environment (-10 ° C to 5° C), please fully charge and keep the battery warm before use. (2) The battery cannot be used in an environment below -10 ° C. (3) In a low temperature environment, it is recommended to stop the flight immediately when the APP prompts“Low Battery Alarm”. (4) In a low temperature environment, it is recommended that the battery be preheated to 5 °C or higher before flight.
1.3 Propellers Before installing the propeller, please carefully check the letters beside the aircraft motor and the letters on the propeller. The two letters must be the same when installing; When the blade is damaged or needs to be replaced, remove the screw counterclockwise to remove the propeller. B A B B A A 2. Remote Controller（America Mode 2） 2.
2.2 Remote Controller Features S/N Key / Switch Function (1) Throttle / Rudder Stick Push the stick forward or backward and the quadcopter will ascend or descend (respectively). Push the stick left or right and the quadcopter will fly left or right (respectively). (2) Elevator / Aileron Stick Push the stick forward or backward and the quad copter will fly forwards or backwards (respectively). Push the stick left or right and the quadcopter will rotate counterclockwise or clockwise (respectively).
S/N Key / Switch Function 10 Press and hold the Fn button, turn the gimbal adjustment Wheel to adjust tthe brightness of the remote control display at the same time. The remote control buzzer beeps when a low battery is triggered or RTH Press the Fn button for 1.5 seconds, and the beep will stop. Long press the Fn button again 1.5 seconds to restore the beep. Custom keys,set the function on the APP and save it in Custom keys when the APP is not connected, [short press] Fn doesn't work.
2.
2.5 Remote Control Antenna Angle (1) Adjust the angle of the remote control antenna and try to face the flight direction of the aircraft as much as possible; (2) Long-distance state, the distance between the two antennas is properly tightened to maintain the antenna directivity; (3) Closer Sate, the two antennas are properly separated to maintain a wide receiving range; (4) Do Not Form an occlusion or cross bettern the antennas. 3 Flight 3.1 Download The X-hubsan 2.
3.2 Main Interface Guide Home Page Remote Aircraft Aircraft Motor FPV Battery Status (Video) Control GPS Signal Signal Signal Level Flight Status Not Connected Setting 100% 11V Flight Mode Camera Setting Headless On / Off Photo / Video Switch Auto Takeoff / Auto RTH Gimbal Pitch Location Aircraft GPS Take Photo / Video Gallery 飞机速度 00.000000 , -000.0000 SPEED 0.0M/S 45.877503 , -106.123984，65m H: 0.0m Altitude Ball Transmitter GPS D: 0.
(4) Start binding (This step is only required when first binding or replace the transmitter, do it manually.) 1. Go to APP - Setting - Controller, transmitter connection method: Leas Tr a n s m i t t e r m o d e l Leas HT018A C o n t ro l l e r S e t t r a n s m i t t e r a n d a i rc r a f t c o n n e c t i o n Joystick setting Custom button Fn No function 2. Using a pin to long press the aircraft bind button to enter binding mode. 3.
3.4 Aircraft Calibration 3.4.1 Horizontal Calibration During the flight, when the aircraft has a significant horizontal deviation, please land the drone, lock the motor, and place it on the horizontal ground. Then enter the APP setting interface, select horizontal calibration, the aircraft will automatically perform the calibration, the four heading lights will flash, and it will stay on after the calibration is completed. Do not move the aircraft during calibration.
3.4.3 GPS Accuracy Test After entering the APP interface, tap on "Aircraft", select "GPS Accuracy Test" then tap on "En able / Restart GPS Accuracy Test". The aircraft will automatically proceed to test. Aircraft GPS Accuracy Test Current GPS Accuracy 5m GPS Accuracy Test Timeout 15 Start GPS Accuracy Test Return altitude setting The aircraft will rise to the set RTH altitude before activate RTH 3.
(3) The aircraft must be placed horizontally (4) It is not recommended to take off forcefully when the GPS satellite signal is not reached. Connected Staring the Motors Push both stick to the bottom outer corners to start the motors. Once the motors have started spinning,Release both sticks simultaneously. Stopping the Motors 45.877503 , -106.123984 SPEED 0.0M/S 0 45.877503 , -106.123984，65m H: 0.0m Pitch 35° D: 0.
Flight Control Mode (The flight controller judges the GPS signal and switches the corresponding mode) GPS Mode With good GPS conditions, using GPS fixed point and optical flow assist. Optical flow mode When the aircraft is hovering, and the GPS quantity is insufficient, using the optical flow fixed-point mode. The effectively fixed height of optical flow mode is 5 meters and greater than 5 meters for attitude mode. In this mode, the maximum speed of the aircraft is 3m / s.
4.3 Return-to-home(Rth) There are three types of RTH: One-key RTH, Low Battery RTH,and Failsafe RTH. When taking off, GPS ≥ 6 stars, the aircraft successfully recorded to the return point. If there is no GPS signal forced take-off, the position with the latest GPS ≥ 6 stars is recorded as the return point. RTH-Process 1. Record "Home Point" 2. Trigger return conditions 3. Adjust t he direction of the head 4.
4.4 Search The Drone Apron When the aircraft landed or returned to a height of about 10 meters from the ground, it will automatically enter the search for the drone apron function. Connected 100% 11V 45.877503 , -106.123984 SPEED 0.0M/S 45.877503 , -106.123984，65m H: 0.0m D: 0.0m T: 0% R: 0% E: 0% A: 0% (1) The gimbal overlooks the search for the drone apron [H], Apron requirements: 1 Sharp contrast, 2 white "H" lettering, 3 Apron without obstruction.
4.5.2 Creative Video Panorama Photography: (1) Select the direction of rotation (clockwise / counterclockwise); (2) Set the rotation angle, the range of rotation angle (90 ° -360 ° ,accuracy 1°); (3) Set the speed (2-30 ° / sec, accuracy 1); (4) Click GO, the aircraft rotates in place in the hover position,shooting during the rotation + storage Video recording; (5) During the execution, you can click the exit button to exit the mode and save the video.
4.5.4 Orbiting Tap on "Mode Selec tion" then "Orbit Mode" to set the current location or the position of the mobile device as the center.During Orbit mode, you can adjust the speed and direction by moving the control stick left and right and adjust the orbit radius by moving the control stick forward and backward. Connected 100% 11V Normal Mode Waypoint Mode Orbit Mode Follow Mode Creative Video 45.877503 , -106.123984 SPEED 0.0M/S 45.877503 , -106.123984，65m H: 0.0m D: 0.
Waypoint Memory: After entering the mode, fly the aircraft and tap on "Memorize Waypoints" on the APP and the aircraft will mark the location. After memorizing all the waypoints, upload and execute, then the aircraft will fly according to the memory. If the aircraft is not in the starting position, the aircraft will fly to the starting position before starting this function. 4.5.6 Line Fly Mode Tap on "Mode Selection" then "Line Fly Mode".Set the angle,distance and speed of the aircraft.
4.5.7 Time-lapse Photography When you choose time compressor mode, you can choose free time-lapse and surround time-lapse. Hover mode 100% 11V free time-lapse surround time-lapse Free Time-lapse The aircraft will take a certain number of photos and compose time-lapse videos automatically according to the parameters which you set. During the process of shooting, the user can control the flight of the aircraft freely.
Surround Time-lapse The aircraft will take a certain number of photos and compose time-lapse video automatically according to the circle point of interest and the parameters which you set. During shooting, operating lever will automatically quit the task.
4.6 Gimbal Camera 4.6.1 Camera Settings Click the setting icon for camera on the main interface of the APP and you can set the resolution, white balance, color and other parameters as follows: Connected V i d e o Re s o l u t i o n 4K E: 0% R: 0% T: 0% A: 0% Frame Rate 30FPS w h i t e ba l a n c e Auto 网格线 Color Normal Video Forma 45.877503 , -106.123984 SPEED 0.0M/S 0 45.877503 , -106.123984，65m H: 0.0m Pitch 35° D: 0.0m MP4 50 Ro l l 4 5 ° Ya w 2 5 ° 4.6.
4.6.3 Tf Card (1) support TF card, U3 above 16G/32G/64G/128G; (2) hot plug is supported. It is recommended to plug in the TF card after switch off the power. 5 FAQ 1.The mobile device and remote control cannot be connected (1) Check whether the status of the APP control signal icon has changed (2) For USB Settings on android phones, check out "Android phone connection tutorial" 2. Aircraft cannot be searched (1) Restart the plane, remote control and x-hubsan 2.
8. The tilt Angle of the gimbal is too large or the gimbal show abnormal (1) Restart the aircraft to recalibrate the gimbal (2) Check on the APP to see whether the gimbal status is normal 9. Gimbal initialize failed Before starting the aircraft, take off the protective cover of the gimbal 10.
ZINO 2 Parts & Accessories ZINO200-01 ZINO200-02 ZINO200-03 ZINO200-04 ZINO200-05 ZINO200-06 ZINO200-07 ZINO200-08 ZINO200-09 ZINO200-10 ZINO200-11 ZINO200-12 ZINO200-13 ZINO200-14 ZINO200-15 ZINO200-16 ZINO200-17 ZINO200-18 ZINO200-19 ZINO200-20 ZINO200-21 ZINO200-22 ZINO200-23 ZINO200-24 ZINO200-25 27
ZINO 2 Parts & Accessories ZINO200-26 ZINO200-27 ZINO200-28 ZINO200-29 ZINO200-30 ZINO200-31 ZINO200-32 ZINO200-33 ZINO200-34 ZINO200-35 ZINO200-36 ZINO200-37 ZINO200-38 ZINO200-40 ZINO200-46 ZINO000-10 ZINO000-11 ZINO000-12 ZINO000-29 ZINO000-30 ZINO000-37 ZINO000-42 ZINO000-48 ZINO000-54 ZINO000-55 28
ZINO 2 Parts & Accessories ZINO200-47 ZINO200-48 ZINO200-49 29 ZINO200-50 ZINO200-51
ZINO 2 Parts & Accessories ITEM NUMBER NAME OF SPARE PARTS ITEM NUMBER NAME OF SPARE PARTS ZINO200-01 Gyroscope Cover ZINO200-18 Cooling bracket ZINO200-02 Upper Body Shell ZINO200-19 (with screw) gimbal steel plate lower body shell, ZINO200-03 Arm wear gasket Gyroscope upper shell, ZINO200-20 gyroscope lower shell ZINO200-04 Back shell ZINO200-21 gimbal supporter ZINO200-05 Front lens base and lower lens base gimbal anti-separtion, Left front arm cover, Right front arm cover, ZINO200-06 left
ZINO 2 Parts & Accessories ITEM NUMBER NAME OF SPARE PARTS ZINO200-37 Screw ZINO000-37 screwdriver ZINO200-38 Battery ZINO200-40 adapter (Europe) ZINO200-46 remote HT018A ZINO000-10 Micro USB cable ZINO000-11 Type C cable ZINO000-12 iphone cable ZINO000-42 Micro USB cable ZINO000-54 TF card 32G ZINO000-55 Card reader ZINO200-47 carry bag ZINO200-48 gimbal ZINO200-49 gimbal coaxial line ZINO200-50 Antenna of remote ZINO200-51 filter 31
Limitation of Liability Hubsan accepts no liability for damages, injuries or any legal responsibi li-ties incurred directly or indirectly from the use of Hubsan products under the following conditions: 1.Damages, injuries or any legal responsibilities incurred when users are drunk, under the influence of drugs or anesthesia, dizzy, fatigued, nauseous and / or affected by other conditions both physical and mental that could impair sound judgment and / or personal ability. 2.
12. The acquisition, through use of Hubsan products (specifically but not limited to aircraft), of any data, audio, video that results in infringement of law and / or rights. 13. Misuse and / or alteration of batteries, product / aircraft circuits, hardware protections (including protection circuits), RC model and battery chargers. 14.
FCC INFORMATION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruc-tions, may cause harmful interference to radio communications.
Please read the operating instructions carefully before use! ●Never leave units unattended when charging ●Unplug the charging cable immediately after charging ●Propellers may cause injury ●This product is not a toy ●Not suitable for children under 14 years of age Flight Academy Product name: ZINO 2 Product Standard Number:Q / HBS 001-2017 Vendor: Shenzhen Hubsan Technology Co.
