USER’S GUIDE 5" Video Baby Monitor Nursery View Pro, Nursery View Pro Twin The features described in this user’s guide are subject to modifications without prior notice.
Welcome... to your new Hubble Video Baby Monitor! Thank you for purchasing your new Hubble Smart Nursery product. Now you can see and hear your baby sleeping in another room or you can monitor your older children in their playroom. Please retain your original dated sales receipt for your records. For warranty service of your Hubble product, you will need to provide a copy of your dated sales receipt to confirm warranty status. Registration is not required for warranty coverage.
Overview of the Parent Unit 1 2 3 4 5 6 7 14 8 9 10 15 11 16 17 12 18 13 1. 2. 3. 4. 5. 6. 7. Display (LCD screen) Charging LED RED when mains power connected. Parent Unit ON/OFF LED (Green) Sound Level indicators (Green, Amber, Red, Red) Show the sound level detected by the Baby Unit - the louder of sound detected, the more LEDs light up. Volume Press to decrease Volume level. Volume + Press to increase Volume level.
Parent Unit menu icons Signal Level (4 Levels) Night Vision Mode (Video also changes to Black/White). Talk Mode On. Indicates the screen off timer is set. Volume Level Control (8 Levels). No Baby Unit detected. Battery Level Indication (4 Levels). Zoom Level Control (1X, 2X). LCD Brightness Level Control (8 Levels). Lullaby Control (5 Song Selections). Alarm Setting (6h, 4h, 2h, OFF) On status bar, indicates alarm set, and when flashing, that alarm time has been reached or missed.
Overview of Your Baby Unit 1 2 3 7 4 8 5 9 6 1. 2. 3. 4. 5. Light Sensor Infrared LEDs (x8, for night vision) Camera Lens High Sensitivity Microphone Power/Link indicatior 10 6. 7. 8. 9. 10. Power Socket Speaker PAIR button Screw mounting hole Temperature Sensor Important guidelines for installing your Digital Video Baby Monitor • To use your Baby Unit and Parent Unit together, you must be able to establish a radio link between them, and the range will be affected by environmental conditions.
Table of contents 1. Safety Instructions................................................................................ 8 2. Getting Started.................................................................................... 11 2.1 2.2 2.3 2.4 Connecting the Power Supply for the Baby Unit..............................11 Connecting the Power Supply of the Parent Unit............................11 Desktop Stand of the Parent Unit ....................................................12 Registration (Pairing).
5. Disposal of the Device (environment)............................................. 19 6. Cleaning.................................................................................................. 19 7. Help........................................................................................................... 20 8. General Information............................................................................ 22 9. Technical Specifications................................................................
1. Safety Instructions WARNING: Strangulation Hazard: Children have STRANGLED in cords. Keep this cord out of the reach of children (more than 3ft (1m) away). Never use extension cords with AC Adapters. Only use the AC Adapters provided.
• Choose a location for the Baby Unit that will provide the best view of your baby in his/her crib. • Place the Baby Unit on a flat surface, such as a dresser, bureau or shelf, or mount the Baby Unit with Hubble Grip (Not Included). • NEVER place the Baby Unit or cords within the crib. English BABY UNIT SET UP & USE: Warning: This Baby Monitor is compliant with all relevant standards regarding electromagnetic fields and is, when handled as described in the User’s Guide, safe to use.
• • • Only use the chargers and power adapters provided. Do not use other chargers or power adapters as this may damage the device and battery pack. Do not touch the plug contacts with sharp or metal objects. Connect the power adapters to easily accessible electrical sockets. Caution: There is a risk of explosion if the battery is replaced by an incorrect type. Dispose of used batteries according to their instructions. Use only the rechargeable battery pack with rating: 3.8V 2100mAh.
2.1 English 2. Getting Started Connecting the Power Supply for the Baby Unit • Insert the DC plug of the power adapter into the DC socket on the back of the Baby Unit. • Connect the other end of the power adapter to a suitable electrical outlet. • The baby unit turns on and the power indicator lights in Green colour. Note: Only use the supplied power adapter (DC5V/1000mA). 2.
Note: When the Baby and Parent Units are both turned on and within range, the Parent Unit should show a color image from the Baby Unit camera, but if the room is dark, the image will be in black and white, with an icon showing the Baby Unit is in Night Vision mode. 2.3 Desktop Stand of the Parent Unit • The parent unit comes with a desktop stand attached to the back of the parent unit. • To place the parent unit on a desk, simply pull out the stand, as shown.
Registration (Pairing) The Baby Unit is pre-registered to your Parent Unit. You do not need to register it again unless the Baby Unit loses its link with the Parent Unit. To re-register your Baby Unit, or register a new Baby Unit, follow the procedures below: 1. Press the button and the menu bar will pop up. is highlighted, and 2. Press the < LEFT button or > RIGHT button until the - (delete) / + (add) / (view) / (scan) menu will pop up. 3.
3. Using the Baby Monitor 3.1 Setting Up Place the Baby Unit in a convenient location (e.g. on a table) and point the camera lens towards the area you want to monitor. Adjust the angle of the Baby Unit's camera until you are satisfied with the image shown on the Parent Unit. Note: Do not place the Baby Unit within the baby’s reach! If there is interference with the picture or sound, try moving the units to different locations, and ensure they are not close to other electrical equipment. 3.
4.1 English 4. Parent Unit Menu Options Volume Press the + or - button to adjust the volume level. icon will pop up and you can select the desired volume from level The 0~8. (The default volume level setting is level 4, and level 0 is OFF.) 4.2 1. 2. 3. Brightness Press the button and the menu bar will pop up. Press the < LEFT button or > RIGHT button until is highlighted. Press the + UP button or - DOWN button to select the desired brightness from level 1 ~ 8. (The default brightness is level 4.) 4.
4.5 Camera Control 4.5.1 Add (pair) a camera 1. 2. 3. 4. 5. Press the button and the menu bar will pop up. is highlighted, and Press the < LEFT button or > RIGHT button until the - (delete) / + (add) / (view) / (scan) menu will pop up. Press the + UP button or - DOWN button to select + (add), and press the button to confirm. Camera 1 / 2 / 3 / 4 will pop up. Press the + UP button or - DOWN button to select the desired Camera, and press the button to start searching for a camera unit.
1. 2. 3. 4. 5. Delete a camera Press the button and the menu bar will pop up. is highlighted, and Press the < LEFT button or > RIGHT button until the - (delete) / + (add) / (view) / (scan) menu will pop up. Press the + UP button or - DOWN button to select - (delete), and press the button to confirm. Camera 1 / 2 / 3 / 4 will pop up, press the + UP button or - DOWN button to select the desired Camera, and press the button.
4.7 Power Saving mode 1. 2. 3. Press the button and the menu bar will pop up. Press the < LEFT button or > RIGHT button until V is highlighted. Press the + UP button or - DOWN button to select auto video off after 5 mins, 15 mins or 30 mins (if operating on batteries only). Note: The audio will remain and you can press any key to switch the video back on. 4.8 View multiple cameras on screen This function is only available when you have more than 1 Baby Unit (Camera).
At the end of the product life cycle, you should not dispose of this product with normal household waste. Take this product to a collection point for the recycling of electrical and electronic equipment. The symbol on the product, user’s guide and/or box indicates this. Some of the product materials can be re-used if you take them to a recycling point. By reusing some parts or raw materials from used products you make an important contribution to the protection of the environment.
7. Help Display No display • Try recharging the battery pack. • Reset the Units. Unplug both the Units' electrical power, then plug them back in. • Is the Unit switched on? • Press and hold the ON/OFF button 0 on the Parent Unit for 3 seconds to switch it ON. • Is the correct camera selected? Change the camera number, if necessary. • Is the video display turned on? Press the VIDEO ON/OFF button V to turn it ON.
Noise interference on your device • Use of other 2.4 GHz products, such as Bluetooth™ systems or microwave ovens, may cause interference with this product. Keep the Unit at least 5 feet away from these types of products, or switch them off if they appear to be causing interference. 8. General Information If your product is not working properly, read this User Guide. Contact Customer Service: Live Chat: hubbleconnected.com Email: support@hubbleconnected.
What Does this Limited Warranty Cover? Subject to the items listed below in the section “What is not Covered” BINATONE warrants that this Hubble connected branded product (“Product”) will be free from defects in material and workmanship under normal use for a period of 1 year from the date of purchase and that any certified accessory (“Accessory”) sold for use with this product will be free from defects in materials and workmanship under normal use for a period of 90-days from the date of purchase.
THIS LIMITED WARRANTY SETS FORTH THE ENTIRE LIABILITY OF BINATONE AND CONTAINS YOUR SOLE AND EXCLUSIVE REMEDY. OTHER THAN THIS LIMITED WARRANTY, BINATONE MAKES NO ADDITIONAL REPRESENTATIONS OR WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IF YOUR STATE DOES NOT PERMIT THE DISCLAIMER OF WARRANTIES, THEN THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE IS LIMITED TO THE DURATION OF THIS LIMITED WARRANTY.
What will BINATONE do? BINATONE or its authorized distributor at its sole discretion will, at no charge, repair or replace any Products or Accessories that do not conform to this Warranty. In the event that replacement is necessary to remedy a defect in material or workmanship, BINATONE may use new or remanufactured products, accessories or parts of equal quality to the original Product or Accessory.
English This device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le présent appareil est conforme aux Partie 15 des règlements de la FCC et CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
Download User Guide from website: support.hubbleconnected.com FCC and IC RF Radiation Exposure Statement Caution: The baby unit must be installed to provide a separation distance of at least 20 cm from all persons. FCC et IC Radiation Déclaration d'exposition Attention: L’unité bébé doit être installé pour fournir une distance de séparation d'au moins 20 cm de toute personne. 9. Technical Specifications BABY UNIT 26 Frequency 2402 MHz to 2477 MHz Image sensor color CMOS 0.
Frequency 2402 MHz to 2477 MHz Display 5” diagonal LCD Brightness Control 8 steps Volume Control 8 steps Operating Temperature 410F - 1040F Power Adapter: Input 100-240V AC, 50/60Hz, 300mA; Output 5.0V DC, 1000mA English PARENT UNIT WARNING Use only with provided power supply. Battery (built-in) TMB i9300 3.8V, 2100mAh Lithium-Ion, re-chargeable battery pack WARNING Do not attempt to replace the battery, but contact customer Service if it needs replacing.
Manufactured, distributed and sold by Hubble Baby(HK) Limited Hubble Connected and the logo are trademarks or registered trademarks of Binatone Electronics International LTD. All rights reserved. US_EN Version 1.
