User's Manual

DRAFT COPY

```

In the Box

• JumpCharge Desktop Unit

• AC Power Cable

• Ethernet Cable

• User Manual

Note: This unit is only permitted for use with the provided equipment.

Setup

Step 1: Go to https://jumpcharge.com/portal and register your unit using the Serial

Number on the back of the unit. See the Web Portal Set-Up Instructions for further

information.

Step 2: Plug the AC Power Cable and Ethernet into your JumpCharge unit. Ethernet

connection is required for initial installation.

Step 3: Place your batteries into your JumpCharge unit.

You’re all set! Anyone with the JumpCharge app can now tap their pass to checkout

batteries from your JumpCharge unit.

JumpCharge

User Manual

PAGE 1
DRAFT COPY JumpCharge User Manual ``` In the Box • • • • JumpCharge Desktop Unit AC Power Cable Ethernet Cable User Manual Note: This unit is only permitted for use with the provided equipment. Setup Step 1: Go to https://jumpcharge.com/portal and register your unit using the Serial Number on the back of the unit. See the Web Portal Set-Up Instructions for further information. Step 2: Plug the AC Power Cable and Ethernet into your JumpCharge unit.
PAGE 2
DRAFT COPY Regulatory Information Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment.