Cut Sheet

ManualsBrandsHubbell-Killark ManualsExplosion-Proof FittingsFlex Coupling 3/4"x18" Bronze

Certificate of Compliance

Certificate:

2218736

Master Contract:

151933

Project:

2429874

Date Issued:

July 19, 2011

DQD 507 Rev. 2009-09-01 Page: 1

Issued to: Killark Electric Manufacturing Co.

3940 Dr. Martin Luther King Dr.

St. Louis, MO 63113

USA

Attention: Tom Michalski

The products listed below are eligible to bear the CSA

Mark shown with adjacent indicators 'C' and 'US' for

Canada and US or with adjacent indicator 'US' for

US only or without either indicator for Canada only.

D. Somma

Issued by:

D. Somma, C.E.T.

PRODUCTS

CLASS 3428 82

- FIXTURES AND FITTINGS-Fixture Fittings - For Hazardous Locations-

Certified to U.S. Standards

CLASS 3428 02

- FIXTURES AND FITTINGS - Fixture Fittings - For Hazardous Locations

CLASS 4418 83

- CONDUIT FITTINGS - Fittings - For Hazardous Locations - Certified to

US Standards

CLASS 4418 03

- CONDUIT FITTINGS - Fittings - For Hazardous Locations

PART A

CLASS 4418 03 – CONDUIT FITTING – Fittings for Metal Conduit – For Hazardous Locations

Class I, Groups A, B, C and D; Class II, Groups E, F and G; Class III:

• Flexible connection fittings, rain-tight, Series EKJ and EKJ***SS conduit sizes 1/2, 3/4, 1, 1-1/4, 1-1/2 and

2.0 inches, with flexible lengths ranging from 4 to 36 in. Inside radii of bends should not be less than 10 in.

for the 1/2 in., 12 in. for the 3/4 in., 14 in. for the 1 and 1-1/4 in. and 16 in. for the 1-1/2 in. and 2 in. Series

EKJ***SS conduit size 2-1/2 in. with flexible lengths ranging from 12 to 36 in. Inside radii of bends should

not be less than 24 in. for the 2-1/2 in. EKJ may be followed by UF, may be followed by MF or FF, maybe

followed by Ex. EKJ***SS may have UF prior to the SS, may have MF or FF after the SS may be followed

by Ex. Series ECF conduit sizes 1/2, 3/4 and 1 in. with flexible lengths ranging from 4 to 36 in. Inside radii

of bends should not be less than 10 in. for the 1/2 in., 12 in. for the 3/4 in. and 14 in. for the 1 in. ECF may

be followed by UF, may be followed by MF or FF, maybe followed by Ex.

Summary of content (4 pages)

PAGE 1
Certificate of Compliance Certificate: 2218736 Master Contract: 151933 Project: 2429874 Date Issued: July 19, 2011 Issued to: Killark Electric Manufacturing Co. 3940 Dr. Martin Luther King Dr. St. Louis, MO 63113 USA Attention: Tom Michalski The products listed below are eligible to bear the CSA Mark shown with adjacent indicators 'C' and 'US' for Canada and US or with adjacent indicator 'US' for US only or without either indicator for Canada only. D. Somma Issued by: D. Somma, C.E.T.
PAGE 2
Certificate: 2218736 Master Contract: 151933 Project: 2429874 Date Issued: July 19, 2011 • Flexible connection fittings, rain-tight, Series EKJ-S*** conduit size 2-1/2 in., with flexible lengths ranging from 12 to 36 in. Inside radii of bends should not be less than 24 in. for the 2-1/2 in. Class I, Groups C and D; Class II, Groups E, F and G; Class III: • Flexible connection fittings, rain-tight, Series EKJ***SS conduit sizes 3 and 4 in. with flexible lengths ranging from 12 to 36 in.
PAGE 3
Certificate: 2218736 Master Contract: 151933 Project: 2429874 Date Issued: July 19, 2011 • Flexible fixture fittings, rain-tight , Series EKJ, conduit size ½ and 3/4 in. with flexible lengths ranging from 4 to 36 in. Inside radii of bends should not be less than 10 in. for the 1/2 in. and 12 in. for the 3/4 in. EKJ may be followed by UF, may be followed by MF or FF, maybe followed by Ex.
PAGE 4
Certificate: 2218736 Master Contract: 151933 Project: 2429874 Date Issued: July 19, 2011 Catalogue Number Designation; Hazardous Locations Designation (Class I Groups A, B, C and D; Class II Groups E, F and G; Class III. Or I ABCD; II EFG; III as described in the report); Optionally may be marked with the addition of Zone Marking (e.g. Class I, Zone 1, Groups IIA, IIB, IIC) Trade Size; Raintight; cCSAus monogram. DQD 507 Rev.