B420 ASSEMBLY & INSTALLATION INSTRUCTIONS Vertical Bar Outdoor Sconce with Fluted Glass 307281 MODERN AMERICAN BLACKSMITHS | FINE, HAND CRAFTED LIGHTING CASTLETON, VERMONT USA | HUBBARDTONFORGE.
B420 ASSEMBLY & INSTALLATION INSTRUCTIONS Vertical Bar Outdoor Sconce with Fluted Glass 307281 Component Parts A Fixture B Cap C Threaded Nipple D Lock Nut E Crossbar F Ground Screw G Caulking Lip H Socket I Cup J Inner Glass K Oring (2) L Outer Glass M Brace N Holder MODERN AMERICAN BLACKSMITHS | FINE, HAND CRAFTED LIGHTING CASTLETON, VERMONT USA | HUBBARDTONFORGE.
B420 ASSEMBLY & INSTALLATION INSTRUCTIONS Vertical Bar Outdoor Sconce with Fluted Glass 307281 CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician. This product must be installed in accordance with applicable installation code(s), by a person familiar with the construction and operation of the product and the hazards involved.* Caution: Do not exceed maximum wattage noted on fixture.
B420 ASSEMBLY & INSTALLATION INSTRUCTIONS Vertical Bar Outdoor Sconce with Fluted Glass 307281 To Install Glass (Figure 3 ) 1. Unpack both inner and outer glass (J & L) and locate o-rings (K) found in kit bag. 2. Stretch o-rings (K) over one end of inner glass (J). Position just slightly above bottom of glass (see figure 3). 3. Install bulb (not included) into socket (H). L 4. Place inner glass (J) over the bulb. 5. Slide inner glass (J) with o-ring into cup (I) until it hits bottom of cup.