Binocular people flow counter terminal Binocular people flow counter terminal Product Description 2020-10-28 V1.0.
content Chapter 1 Product Introduction ................ .................................................... 3 1.1 product description ......................................................................................... 3 1.2 Features ............................................................................................................ 3 1.3Definition of passenger flow information ..................................................... 4 Chapter 2 Product Specifications ..........................
Chapter 1 Product Introduction 1.1 product description Binocular people flow counter terminal The 3D depth information is obtained in real time through the binocular stereo vision AI sensor, based on the head and shoulders feature algorithm, the head and shoulders features in complex scenes are identified, and the human body tracking algorithm is used to achieve accurate passenger flow statistics.
Network smart devices: • • The binocular passenger flow statistics device has edge computing capabilities, and the passenger flow statistics calculation is completed locally on the device, directly Output passenger flow data, low network bandwidth requirements; Real-time output of passenger flow statistics to meet the needs of realtime collection and monitoring; • Support flash offline storage, don't worry about network disconnection; • Support static IP and DHCP modes for flexible deployment; Suppo
Chapter 2 Product Specifications 2.1 Performance parameters Product performance parameters are shown in Table 2-1 below: visual parameters Table 2- 1 Product performance parameter table field of view Horizontal 100°,Vertical 70° depth map resolution 640*400@0~3.5m;1280*800@3.5m~6m output frame rate 640*400@25fps Function parameter Accuracy ≥98% height range 2.2~6.0m coverage 1.2~5.5m filter height 0.5~1.2m technical parameter power 3.2W~3.6W Power supply POE(802.
2.2 Mechanical parameters PCE Tail Network Harness label 2.3 Passenger flow parameters The relationship between the coverage width of the passenger flow camera and the installation height is shown in Table 2-2 installation height Table 2- 2 Passenger flow parameter table Cover width 2.2m 1.2m 2.5m 1.9m 2.6m 2.1m 2.7m 2.3m 2.8m 2.6m 2.9m 2.8m 3.0m 2.9m 3.1m 3.3m 3.2m 3.5m 3.3m 3.8m 3.4m 4.0m 3.5m 4.3m 4m~6m 5.
Chapter 3 Introduction to Applicable Scenarios 3.1 Lighting conditions • Normal lighting: refers to the normal lighting environment in shopping malls/stores/restaurants; • Half-sunshine on the street: refers to the scene where the sunlight directly enters the door on the street; • Direct sunlight: refers to outdoor scenes with direct sunlight; • Dim light: refers to dim scenes in some parking lots/cinemas/ bars; 3.
Chapter 4 Product Work Requirements 4.1 Power Requirements The camera can choose to use 12V/2A switching power adapter or POE power supply, the voltage parameters are shown in Table 4-1. Table 4-1 Power supply voltage parameter table Voltage requirements DC12V (±10%) power Average: 7.0W Maximum: 7.2W Notice: 1. Using an incorrect power supply may damage the camera; 2. Do not use a power supply with a voltage greater than DC12V (±10%); 3.
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.