USER MANUAL BINOCULAR PEOPLE FLOW COUNTER TERMINAL PRODUCT INSTRUCTIONS 2020-10-28 V1.0.
USER MANUAL Contents Chapter 1 Product Introduction.................................................................................. 3 1.1 product description.......................................................................................................... 3 1.2 Features............................................................................................................................ 3 1.3 Passenger flow information definition...............................................................
USER MANUAL Chapter 1 Product Introduction 1.1 product description The binocular passenger flow statistics product obtains 3D depth information in real time through the binocular stereo vision AI sensor. Based on the head and shoulder feature algorithm, it recognizes the head and shoulder features in the complex scene, and realizes accurate passenger flow statistics through the human body tracking algorithm.
USER MANUAL 1.3 Passenger flow information definition Enter: In the statistical area, enter the detection area from the direction of entry, walk out of the detection area after crossing the detection line, and count as entering. Go away: In the statistical area, entering the detection area from the opposite direction of entering, and walking out of the detection area after crossing the detection line is counted as leaving.
USER MANUAL Chapter 2 Product Specifications 2.1 Performance parameter The performance parameters of binocular passenger flow statistics products are shown in the following table 2-1: Visual parameters Table 2- 1 product performance parameter table Field of view Horizontal 100°，Vertical 70° Depth map resolution 640*400@0～3.5m；1280*800@3.5m～6m Output frame rate 640*400@25fps Function parameter Accuracy ≥98% Height range 2.2~6.0m Coverage 1.2~5.5m Filter height 0.5~1.
USER MANUAL 2.2 Passenger flow parameters The relationship between the coverage width of the passenger flow camera and the installation height is shown in Table 2-2. Table 2-2 Passenger flow parameters Installation height Cover width 2.2m 1.2m 2.5m 1.7m 3.0m 2.9m 3.5m 4.1m 4m~6m 5.5m NOTE: Please make sure that the product is normally connected to the wifi network during use, and the contact voltage is good during use.
USER MANUAL 2. Click Modify Device Network Parameters, select Wi-Fi, enter Wi-Fi name and password, select IP address assignment method, select DHCP mode in this case, and click save settings. 3. After saving the Settings, the device will be restarted and the client will automatically disconnect the connection with the device. At this time, the camera will enter the wired debugging mode under "wireless working mode", and the status light (middle) will flash once a second (slow flash).
USER MANUAL 8
USER MANUAL Chapter 3 Introduction to Applicable Scenarios 3.1 Lighting conditions • Normal lighting: refers to the normal lighting environment in shopping malls/stores/restaurants, etc.; • Half-sunlight on the street: refers to the scene where the sun directly enters the door on the street; • Direct sunlight: refers to the outdoor scene of direct sunlight; • Dim light: Refers to dimly lit scenes such as some parking lots/cinema/bars; 3.
USER MANUAL Chapter IV Product Working Requirements 4.1 Power requirements The camera can choose to use 12V/2A switching power adapter or POE power supply. The voltage parameters are shown in Table 4-1. Table 4-1 Power supply voltage parameter Voltage requirements DC12V (±10%) POWER average value：7.0W Max：7.2W note: 1. Using an incorrect power supply may damage the camera; 2. Do not use a power supply with a voltage greater than DC12V (±10%); 3.
USER MANUAL Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
