User Guide
Contents About this guide Appearance Installing the display Connects the display to the tower Configuring the display FAQs Safety information Legal Notice i
About this guide This document only applies to associated devices. Read this document carefully before using the device. The components listed in this document may not be included in the device. In this case, you will need to purchase them separately. The functions described in this document can only be used when they are used together with other components. The figures and UIs in this document may be different from the actual ones. All figures are for reference only.
Appearance 1 2 3 1 Panel 2 Support 3 Base 4 Function buttons 4 5 6 7 8 Adjusts the display settings. For details, see the Configuring the display section. 5 Power button/Power indicator Turns the display on and off. 6 • The indicator is steady white when the device is powered on. • The indicator turns off when the device is powered off. • The indicator flashes white in sleep mode. Power port Connects the power adapter for turning on the display.
Installing the display To avoid damaging the screen, do not press on the screen when taking the display panel out of the packaging. 1 3 2 1 Place the display panel on a clean and flat surface, with the front side facing down. (You can view device information including the S/N code on the nameplate on the rear side of the display panel.) 2 Use screws to connect the base to the support.
Connects the display to the tower 2 °) ±2 2°( 0° 5°(±2 ° ) HDMI/VGA 1 Gently lift the assembled display and place it on a flat surface. 2 Use an HDMI or VGA cable to connect the display to the computer. 3 Connect the power cable to the display and connect the power supply. 4 Power on the tower and display. If images are displayed on the display, it indicates that the installation is successful. If no image is displayed on the display, see the FAQs chapter.
Configuring the display 1 2 3 4 After the display and the tower are assembled and powered on, the system automatically configures and optimises the settings of the display. If you need to configure the display settings, you can also open the settings menu of the display to adjust the settings. 1 Press any button from 1 to 4 to access the display settings menu. 2 On the settings menu screen, press buttons 1 to 4 to set the parameters.
Configuring the display Switches between different colour temperature modes including low blue light mode or cool mode. When reading for a long time, we recommend that you set the screen colour temperature to low blue light mode to prevent eye fatigue and make it easier on your eyes. Once Blue light mode is enabled, the screen will take on a mild yellow tint. Adjusts the display settings such as the display mode. Selects the display scenario.
FAQs Unable to power on the display • Check whether the display is powered on. • Check whether the power adapter is correctly connected to the display and the power supply. There are no images on the display • Check whether all of the cables are correctly connected. • Check whether the display and the tower are powered on. • Check whether the VGA or HDMI signal cable is damaged.
Safety information This section contains important information about how to use your device safely and how it operates. Read this information carefully before using your device. Areas with flammables and explosives • Do not use the device in environments where flammables or explosives are stored, such as a petrol station, because the electronics in the device may trigger an explosion or fire. Always adhere to any warning signs or information that may be present in these environments.
Safety information Accessories • Using an unapproved or incompatible power adapter, charger, or battery may cause a fire, explosion, or other hazards. • Use only approved accessories. The use of unapproved accessories may void the warranty, may violate local regulations and laws, and may be dangerous. For information about the availability of approved accessories in your area, contact your retailer. Power adapter safety • The power plug is intended to serve as a disconnect device.
Safety information at the end of the lifespan. This will ensure that EEE waste is recycled and treated in a manner that conserves valuable materials and protects human health and the environment. For more information, please contact your local authorities, retailer, or household waste disposal service or visit the website https://consumer.huawei.com/en/.
Legal Notice Copyright © Huawei 2021. All rights reserved. Trademarks and Permissions The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. in the United States and other countries. Other trademarks, products, services and company names mentioned herein may be the property of their respective owners.
Legal Notice Import and Export Regulations All applicable export or import laws and regulations must be complied with and all necessary governmental permits and licenses must be obtained before exporting or importing the product, including the software and technical data, described in this document. Privacy Policy To better understand how we protect your personal information, please see our privacy policy at https://consumer.huawei.com/privacy-policy. For More Help Visit https://consumer.huawei.
