Copyright © 2008 Huawei Technologies Co., Ltd. All Rights Reserved No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Trademarks and Permissions Ltd. and other Huawei trademarks are trademarks of Huawei Technologies Co., All other trademarks and trade names mentioned in this document are the property of their respective holders. Notice The information in this document is subject to change without notice.
Table of Contents What Is in Your Package ............................................ 1 Getting to Know Your K3565 ...................................... 2 Preparation ............................................................. 4 Installation/Removal Guide ........................................ 6 Safety Information ................................................... 9 Acronyms and Abbreviations .....................................
Thank you for choosing K3565 HSDPA USB Stick . With the K3565, you can access the Internet through wireless network at a high speed. Note: This manual describes the appearance, installation and removal of the K3565. For the operation of the management program, refer to the User Manual.
Getting to Know Your K3565 The following figure shows the appearance of the K3565. It is only for your reference. The actual product may differ. 1 2 3 4 ΠUSB Interface It connects the K3565 to a computer.
• SIM/USIM Card Slot It is where you insert the subscriber identity module/UMTS subscriber identity module (SIM/USIM) card. Ž Micro SD Card Slot It is where you insert the Micro Secure Digital Memory (SD) card • Indicator It indicates the status of the K3565.
Preparation Requirements for the Computer To use the K3565, the computer should meet the following requirements: n USB Type A Receptacle, Compatible with USB 2. 0 High Speed. n Windows 2000 SP4, Windows XP SP2, Windows Vista. n Your computer’s hardware system should meet or exceed the recommended system requirements for the installed version of OS. n Resolution for the display: 800 × 600 or above. Getting Your K3565 Ready n Remove the USIM/SIM card slot from the K3565.
Inserting the Micro SD Card (Optional) Insert the micro SD card into the K3565, as shown in the following figure. Note: Do not remove the micro SD card when it is being used. Removing the card during an operation may damage the micro SD card as well as the device, and data stored on the card may be corrupted.
Installation/Removal Guide On different operating systems (OSs), the installation and removal procedures may differ. Follow the system prompts during operation. Connecting the K3565 with a Computer Note: First, power on the computer. Then connect the K3565 with the computer. Otherwise, the K3565 cannot be installed as normal. n Plug the K3565 into the USB interface of the laptop or desktop computer. n You can connect the K3565 to a laptop or desktop computer using the USB cable for better signals.
n The OS automatically detects and recognises new hardware and starts the installation wizard. n Follow the prompts of the installation wizard. n After the program is installed, a shortcut icon for the K3565 management program is displayed on the desktop. Starting the Management Program After the K3565 is installed, the management program is launched automatically. Then every time the K3565 is connected to the PC, the management program is launched automatically.
Removing the Management Program n Click Start Menu. n Click Control Panel. n Click Add/Remove Program to remove the management program of the K3565. Note: Before removing the management program, exit the management program.
Safety Information Read the safety information carefully to ensure the correct and safe use of your wireless device. Interference Do not use your wireless device if using the device is prohibited or when it cause danger or interference with electric devices. Medical Device n Do not use your wireless device and follow the rules and regulations set forth by the hospitals and health care facilities. n Some wireless devices may affect the performance of the hearing aids.
n Area where the air contains chemical substances and particles (such as granule, dust, or metal powder) n Area indicated with the "Explosives" sign n Area indicated with the "Power off bi-direction wireless equipment" sign n Area where you are generally suggested to stop the engine of a vehicle Traffic Security n Observe local laws and regulations while using the wireless device. To prevent accidents, do not use your wireless device while driving.
WEEE Approval The wireless device is in compliance with the essential requirements and other relevant provisions of the Waste Electrical and Electronic Equipment Directive 2002/96/EC (WEEE Directive). RoHS Approval The wireless device is in compliance with the restriction of the use of certain hazardous substances in electrical and electronic equipment Directive 2002/95/EC (RoHS Directive). Laws and Regulations Observance Observe laws and regulations when using your wireless device.
n Do not leave your wireless device and accessories in a place with a considerably low or high temperature. n Use only accessories of the wireless device approved by the manufacture. Contact the authorized service center for any abnormity of the wireless device or accessories. n Do not dismantle the wireless device or accessories. Otherwise, the wireless device and accessories are not covered by the warranty.
The wireless device is approved to be used in the member states of the EU. The wireless device is in compliance with the essential requirements and other relevant provisions of the Radio and Telecommunications Terminal Equipment Directive 1999/5/EC (R&TTE Directive).
equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
SIM UMTS USB USIM WCDMA Subscriber Identity Module Universal Mobile Telecommunications System Universal Serial Bus UMTS Subscriber Identity Module Wideband Code Division Multiple Access Version: V100R001_01 15 Part Number: 3101****
