DC405
1.Setting up your Video Baby Monitor 1.1. Connecting the power adapter for the baby unit . Connect the small plug of the adapter to the Baby Unit and the other end to the power socket . Only use the enclosed adapter WARNING Strangulation Hazard: Children have STRANGLED in cords. Keep this cord out of the reach of the children ( more than 1 metre away). 1.2. Connecting the power adapter for the Parent Unit if PU is in low battery status. .
Basic operation of the keys 2
2. MENU options and Functions Camera Press MENU button--- Select Camera icon---press’’ OK’’ button---Press add camera (it support add 4 camera at most) ---press OK button---then press camera ‘’ Pair’’ button to pair within 30 seconds.
View Press MENU button---Select View icon--press ‘’ OK’’ button---then you can choose camera 1/ camera 2/ camera 3/camera 4 or scan this 4 cameras to view.
Lullabies Press MENU button---Select Lullabies icon--press ‘’ OK’’ button---then you can choose lullaby to play from lullabies list. It will automatically single cycle once you chose one of lullaby; If chose All, it will automatically repeat all lullabies list.What’s more, user can press VOL +, - button to adjust lullaby volume in this interface.
Feeding Timer Press MENU button---Select Feeding Timer icon--press’’ OK’’ button--then you can choose the time to remind for feeding kids.----after selected, count down bar will appear in video view interface--- when up to predefined time, monitor will alarm for 5 seconds.
Sound Detetion By this function selected to High/Middle/low for sensitivity level, user can hear alarm once any abnormal sound or noise happened.
8
3.Setting 3.1 Language Setting User can select the language to display in the settings menu.
3.2 Brightness Setting You can select the brightness level in the settings menu.
3.3 Sleep mode By turning this function ON, the monitor will enter into power saving mode automatically after you choosed 5 Mins, 30 Mins or 60 Mins. When sleep mode is activated, the display will turn off but audio will still be available.The screen will be in sleep mode and will only wake by briefly pressing the power button.
3.4 High-low Temperature alarm setting User can adjust the highest and lowest temperature limitation data, when room temperature exceeds the limitation setting, monitor will alarm automatically.
3.5 Temperature ℃/℉ switch User can switch between ℃ & ℉ easily by accessing the Temp ℃ / ℉ setting.
3.6 Frequency User can switch between 60Hz&50Hz 14 in the Frequency setting.
3.7 Default Setting User can delete all cameras and settings history by selecting this function.
16
FCC Statement This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.