User's manual FCC ID:2A75I5601L MB5601L User's manual BLE5.2 module make check approve Chen xia Zeng xinsheng Zeng xinsheng Ver2.0 Release date :2022-05-10 Hua shu Communications (Shenzhen) Co.
MB5601L Module User's manual Statement : The content in this article is related to the products of Wasu Communications ( Shenzhen) Co., Ltd. (hereinafter referred to as Wasu Communications) , and this document does not grant any intellectual property license, expressly or implicitly, by estoppel or otherwise . Except as stipulated in Wasu Communication 's terms and conditions of sale for such products, Wasu Communication assumes no responsibility.
MB5601L Module User's manual Update resume: update content version number Modified date V1.0 2021-03-11 Initial release V2.
MB5601L Module User's manual 目录 1. 1 Product Introduction .......................................................................... 5 1.2MB5601L structure block diagram ................................................................5 1.3 Key Features ................................................................................ 6 1.4 Main application areas .........................................................................6 2. Module pin description ...............................................
MB5601L Module User's manual 6.4.16 Data reception (main mode) .................................................................. 24 6.4.17 Disconnect (Master Mode) ................................................................... 24 7. Packaging Information and Reflow Soldering ...................................................... 25 7.1 Mechanical Dimensions .......................................................................25 7.2 Reflow profile ....................................................
MB5601L Module User's manual 1. 1 Product Introduction MB5601L is a small-sized, low-cost , cost -effective Bluetooth low energy B LE5.2 I OT module developed by Wasu Communications . It consists of a highly integrated single-chip SoC solution, onboard PCB antenna and a small number of peripheral devices ; supports a wide voltage range from 1.7 V- 3.6 V ; supports up to 10 GPIOs (G PIOs can be multiplexed into U ART , PWM , SPI , I2C , etc.) port; adopt stamp hole (half hole) welding method.
MB5601L Module User's manual 1.3 Key Features MCU : _ ARM Cortex ™ -M0+ MCUs Support 16 M / 64 MHz main frequency operation (software can set the desired main frequency ) RAM size 96 KB Internally integrated 512 KB flash Support execute-in-place (XiP) mode Scalable external 4 M SPI NOR Flash Power Management: Internal integrated D CDC and L DO power management circuits Support wide voltage input 1.7~3.
MB5601L Module User's manual 2. Module pin description 2.1 pin definition 图 2.
MB5601L Module User's manual 2.
MB5601L Module User's manual 3. Electrical parameters 3.1 Absolute Maximum Ratings Table 2 Voltage Absolute Maximum Ratings symbol illustrate minimum Typical value unit VDD Module power input voltage –0.3 3.6 _ V Tstg storage temperature -40 125 °C Note: The use environment exceeding the rated value will damage the IC . 3.2 Recommended working conditions Table 3 Input Voltage Range detailed symbol illustrate condition minimum Typical value maximum value unit 3.3 3.
MB5601L Module User's manual 4. RF Parameters 4.1BLE transmission characteristics Table 6 BLE transmission characteristics Specification Min. Typ. Max. Unit Maximum RF transmit power 2 4 6 dBm Peak power - Average power 0.34 0.35 0.38 dB -3 MHz -47 -42 -40 dBm -2 MHz -43 -40 -36 dBm +2 MHz -43 -40 -36 dBm +3 MHz -47 -42 -40 dBm F1(avg) 245 255 260 KHz F2(max) 99.9% 100 100 100 % F2(avg)/F1(avg) 0.85 0.88 0.
MB5601L Module User's manual 4.2BLE receiving characteristics Table 7 BLE receiving characteristics Parameter Description Frequency Range BLE 1Mbps Rate BLE 500Kbps Rate Typ. 2402 Max. Unit 2480 MHz Sensitivity at 1Mbps -98.5 -98 -96.5 dBm Sensitivity at 2Mbps -96 -95 -9 4 dBm Maximum input level 0 10 11 dBm C/I Co-channel 4 4.
MB5601L Module User's manual 6. AT command function definition 6.1 Working Mode The Bluetooth module has two working modes : Master Mode and Slave Mode Note: The default factory working mode of the module is the slave device mode, which can be searched by the mobile phone and the master device mode module and connect. 6.1.1 master mode Bluetooth module in master mode: 1. It can be connected with a slave device module. In this mode, you can search and connect to the surrounding slave devices. 2.
MB5601L Module User's manual 6. 2 Module parameter setting AT command 1. Whe n sendi ng AT comma nds, carr ia ge ret urn and li ne feed are requi red. AT com mands ca n on ly take ef fec t when the modul e is not connect ed . 2. Once the Bl ueto oth modul e is connect ed to the devic e, the Bl uet oot h modul e wi ll ente r the da ta tr anspa rent tr ansm is si on mode. Aft er ent er ing the tr anspa rent tr ansm is si on mode ,UA RT 0 recei ves ++ +\ 0, the modul e exit s the tran spar ent tr ansm is si o
MB5601L Module User's manual 6.
MB5601L Module User's manual serial number Function Description AT command format parameter Param: mode 11 AT+SCAN= Scan all BLE devices 0---stop scanning 1---start scanning Param: Mode 12 slave MAC address plus address Connect to the specified AT+CONN= bluetooth device type Address type: 0---local address 1---random address Param: Mode slave MAC address plus address 13 Query the status of the AT+CHINFO connected device, type Address type: 0---local address 1---random addres
MB5601L Module User's manual serial number Function Description AT command format parameter Param1: Channel number; Conidx connection index AT+SVCCHANGE=, 22 , , service change event for multiple connections. For a single connection, set it to 0; Param2: handle handle id; Param3: start_handle start handle; Param4: end_handle end handle; AT+MCONN Query multiple connections 23 24 25 AT+MCONN=, Set up multiple connections , ...
MB5601L Module User's manual serial number 30 Function Description search handle AT command format AT+ATTHDL= parameter UUID 31 Set the packet size of a channel AT+DLE= conidx join index is used for multiple joins.
MB5601L Module User's manual serial number Function Description AT command format parameter : Generation type: 0-Static random address 40 AT+GENADDR=, generate mac address, 1--Private unresolvable address 2--Private address resolution : 6-digit routing address 41 mac address resolution AT+RESOLVADDR= MAC address used for sec secure connection (mac with colon) key 16 bits, the default 42 Set the identity resolution AT+SETIRK=
MB5601L Module User's manual 6.4 Instructions _ 6.4.1 test instruction Downlink response AT OK\r\n parameter none 6.4.2 Module restart Function: software reset, system restart. Downlink response AT+REBOOT OK\r\n parameter none 6.4.3 Get the software version number Downlink AT+VERSION response +VERSION=\r\n OK\r\n parameter Param : software version number example: AT+VERSION\r\n +VERSION=1.0-20200201\r\n OK\r\n 6.4.4 Setup/Query— Bluetooth MAC Downlink response AT+LADDR= OK\r
MB5601L Module User's manual 6.4.5 set/query—set name Downlink response AT+NAME= OK\r\n AT+NAME parameter Param : Bluetooth device name Default name: ""HUSU-BLE-M"" +NAME=\r\n OK\r\n example: AT+NAME=123\r\n Return +NAME=123\r\n Parameters support power-down save. 6.4.6 Module restart Function: The software clears all settings. Downlink response AT+RESET OK\r\n parameter none 6.4.7 Setting/Query—Serial Baud Rate Downlink AT+BAUD= AT+BAUD response parameter OK\r\n Pa
MB5601L Module User's manual 6.4.8 Set/Query—UUID Downlink AT+UUID= response OK \r\n parameter Param : UUIDDefault FF51 +UUID=\r\n AT+UUID OK \r\n example: AT+ UUID =FF00\r\n + UUID =FF00\r\n OK\r\n Modified UUID: 0x0000 FF00 -0000-1000-8000-00805F9B34FB Parameters support power-down save. 6.4.9 Setting/Query - Working Mode Downlink response parameter Param : mode AT+MODE= OK \r\n AT+MODE +MODE=\r\n 0 --- slave mode (default) 1--- Main mode OK \r\n example: AT+MOD
MB5601L Module User's manual example: AT+PIN \r\n +PIN =1234 \r\nOK \r\n AT+PIN=8888\r\n OK \r\n AT+PIN \r\n +PIN=8888 \r\nOK \r\n Parameters support power-down save. 6.4.11 Settings/Query—Auto Reconnect Downlink response AT+AUTOCONN= OK \r\n parameter Param : mode 0 --- do not automatically reconnect (default) 1--- Auto reconnect +AUTOCONN=\r\n AT+AUTOCONN OK \r\n example: AT+AUTOCONN \r\n +AUTOCONN=0 \r\n OK \r\n AT+AUTOCONN=0\r\n OK \r\n Parameters support power-down save. 6.4.
MB5601L Module User's manual 6.4.13 Establish a connection (main mode) Function: connect to the specified bluetooth device; Downlink AT+CONN= response parameter +GATTSTAT=0,2\r\n represents channel 0connecting +GATTSTAT=0,3\r\n Param : mode represents channel 0connected SlaveMACAddress plus address type Address type: 0--- local address 1--- random address Example: AT+CONN=1122334455661\r\n "112233445566 " connect MACSlave with address ,"1 " random address +GATTSTAT=0,2\r\n 6.4.
MB5601L Module User's manual 6.4.15Data Transmission (Master Mode) Function: Send data to the specified Bluetooth channel Downlink response parameter Param 1 : channel number; AT+LESEND=,, none Param 2 : The length of the data to be sent Param 3 : The content of the data to be sent example: AT+LESEND=0,10,0123456789\r\n Delegate to channel 0send012345678910 intotalcharacters. 6.4.
MB5601L Module User's manual 7. Packaging Information and Reflow Soldering 7.1 Mechanical Dimensions Figure 5. MB5601L Module Size diagram (TOP) Figure 6.
MB5601L Module User's manual 7.2 Reflow profile Refer to IPC/JEDEC standards. Peak temperature: <250℃ Reflow soldering times: ≤2 times Profile Feature Average ramp-up rate (t smax to t P ) Pre-heat Time maintained above Specification* 2℃/second max.
MB5601L Module User's manual 8. Reference circuit design 8.
MB5601L Module User's manual 8.2MIC circuit design MB5601L supports two common MIC connection methods: differential and single-ended. The following points should be paid attention to when designing the circuit: 1. The T-shaped RC filter circuit needs to be placed close to the MIC power input pin; 2. Whether it is a single-ended or differential MIC device, the MIC_IN/IP signal line must be routed to the MIC lead according to the differential line .For the pin end, pay attention to isolation protection.
MB5601L Module User's manual 9. Packaging Information Part No MOQ(pcs) Shipping packaging (pallet / tape) MB5601L 1200 tray Modules per pallet (pcs) Number of pallets per small box (pcs) Number of modules per small box (pcs) 60 20 1200 FCC Statement Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
MB5601L Module User's manual 2.3 Summarize the specific operational use conditions Describe use conditions that are applicable to the modular transmitter, including for example any limits on antennas, etc. For example, if point-to-point antennas are used that require reduction in power or compensation for cable loss, then this information must be in the instructions.
MB5601L Module User's manual 2.6 RF exposure considerations It is essential for module grantees to clearly and explicitly state the RF exposure conditions that permit a host product manufacturer to use the module.
MB5601L Module User's manual 2.10 Additional testing, Part 15 Subpart B disclaimer The grantee should include a statement that the modular transmitter is only FCC authorized for the specific rule parts (i.e., FCC transmitter rules) listed on the grant, and that the host product manufacturer is responsible for compliance to any other FCC rules that apply to the host not covered by the modular transmitter grant of certification.