User Manual

ManualsBrandsHTZSAFE ManualsElectronicsDriveway Alarm Wireless Long Range Weatherproof- 1/2Mile Solar Driveway Alarm System- 3 Adjustable Sensitivities-Fully Weatherproof Outdoor Motion Sensor&Detector DIY Security Alert System

Table Of Contents

Wireless Alarm System

User Manual

1. System Components And Usage

Note:

contact@saferhomee.com

1.The alarm system is pre-programmed , please

proceed to part 2 of the manual for setup. (Or please

search “HTZSAFE T904&806A SETUP“ on YouTube,

there is a video for your reference)

2.If you want to add additional HTZSAFE sensors to

the system, program them according to part 3 of the

manual or contact us directly. (Or please search

“HTZSAFE T904 to 806A Connect “ on YouTube, there

is a video for your reference)

After-sale Service:

E-mail:

Volume

Melody

Power Plug

Plug-in Alarm Receiver

Power Plug:plug the receiver into a socket

Zone Number

Volume: 4 adjustable volume levels

Melody: 35 optional melodies

Zone Number: flash for several seconds when the sensor

be activated

Summary of content (12 pages)

PAGE 1
Wireless Alarm System User Manual Note: 1.The alarm system is pre-programmed , please proceed to part 2 of the manual for setup. (Or please search “HTZSAFE T904&806A SETUP“ on YouTube, there is a video for your reference) 2.If you want to add additional HTZSAFE sensors to the system, program them according to part 3 of the manual or contact us directly. (Or please search “HTZSAFE T904 to 806A Connect “ on YouTube, there is a video for your reference) After-sale Service: E-mail:contact@saferhomee.com 1.
PAGE 2
Speaker Speaker:sound for several seconds when the sensor be activated Solar Wireless Motion Sensor Solar Panel Sensor Eye Sensor Eye: detects heat movements Solar Panel:charges the built-in battery of the sensor Charge Jack ON/OFF Charge Jack:used to connect the additional solar panel or DC 5V power adapter ON/OFF:sensor on/off 2
PAGE 3
ATTENTION PLEASE The KIT includes a USB charging cord without a AC adapter which is used to manually charge the solar sensor before use or after pro-longed low light conditions causing low battery. Please kindly connect the charging cord with your own USB plug(such as the direct USB outlet, the phone's USB plug or computer's USB, etc.).
PAGE 4
2. Operation Instructions Step 1 Plug the receiver into an outlet Ring tone prompt and the zone number will light up one by one for 3 times meaning the receiver works properly.
PAGE 5
Step 3 Activate The Wireless Motion Sensor (wait about 30 seconds after you turn on the sensor) 1st method:press the ON/OFF button twice ON/OFF (press twice) (the light of the ON/OFF button will flash once meaning the motion sensor was activated and sent the wireless signal) 2nd method: Walk through in front of the sensor to acivate 1 foot a way (the light of the ON/OFF button will flash once meaning the motion sensor was activated and sent the wireless signal;then the motion sensor will automatically r
PAGE 6
Step 4 Press “Melody” once to choose the melody for this sensor, total 35 optional melodies. Melody Step 5 Same operation if you have the additional sensor,and please refer to part 3 of the manual for other settings.
PAGE 7
Installation Notes: 1. Please fix the motion sensor tightly to ensure the position and the direction will not be moved easily by wind. 2.Please point the sensor towards a open field (not towards the trees or bushes) 3.please adjust the sensor a little down(never upwards) 4.please point the sensor eye towards to the engine or exhaust pipe if detecting vehicles.
PAGE 8
3. Other Settings (1)How to add additional sensors to the receiver (up to 4 sensors can be added to one or multiple receivers) Step 1 Plug the receiver into an outlet Step 2 Press and hold the “Volume” button for 5 seconds, release the button when one of the zone number flashing and a beep prompt one of the zones flashing slowly All the Zone numbers light up Volume Volume press and hold the Volume button release the button for 5 seconds Step 3 Activate the sensor.
PAGE 9
Step 4 Activate the sensor again to confirm the sensor has been added to the receiver already. Step 5 Press”Melody”button to choose the melody for this sensor. total 35 optional melodies . Step 6 Same steps to add more sensors to the plug-in receiver.
PAGE 10
(3)How to adjust the volume Step 1 Plug the receiver into an outlet Step 2 Press the “Volume” once to adjust the volume of the receiver.
PAGE 11
Step 2 To select Low sensitivity- - - - turn on the sensor by pressing the ON/ OFF button 3 times. To select Medium sensitivity- - - - turn on the sensor by pressing the ON/OFF button 4 times. To select High sensitivity----turn on the sensor by pressing the ON/ OFF button 5 times. 4.
PAGE 12
Wireless Motion Sensor 92mm 45mm 103mm Technical parameters Item Detection Range Detection Angle Wireless Transmission Range Wireless Frequency Working Voltage Battery Type Battery Capacity Working Current Solar Panel Output Current Working Temperature Range Technical Parameters Low=25feet(7.5m) Mid=50feet(12m) High=70feet(21m) 15 1/2 Mile(800m) 433MHz FSK+FHSS 3.