Thermal Imaging Camera Instruction Manual Dongguan Xintai Instrument Co.,Ltd. Add: Building F, No. 22 Yuhua Street, Hongye Industrial Zone, Tangxia Town, Dongguan City, Guangdong Province Postcode:523710 Tel:+86-769-82612006 Fax:+86-769-82612005 Website:www.hytechcn.com.cn www.xintest.com.cn www.xintest.en.alibaba.com Email:kevin@xintest.com.cn User Manual Version 1.0. September 12，2019.
Contents Preface Limited Warranty and Limited Responsibility 3. Introduction to “Color Palette” Sub-menu 3.1. Color Palette Description Safety Instruction 3.2. Application of Color Palette Preliminary Acquaintance with Infrared Thermal Imager Overview 4. Introduction to “Emissivity” Sub-menu 4.1. Emissivity Description Cleaning of the Products 4.2. Emissivity Setting Lens Maintenance 4.3.
Preface When warranty service is repaired, please contact the service center authorized by Xintai Instruments and Apparatus Co., Ltd to obtain the Respected users: authorization information for return. Then post the product together with How are you! Thank you for purchasing our instrument. In order to use it in a better manner, we remind you to read the instruction for use carefully before use and keep it properly so as to look up in the future use.
Safety Instruction Warning Please ensure that you have read and understood the safety precautions described in the following text before using the product so that you can operate it correctly. The warning describes the acts that may cause harm to users. Please observe the following operation in order to avoid electric shock or personal injury.
Don’t weld the battery without permission. Do not touch the electric wire with wet hands. Such operation may damage the battery and result in leakage and It is possible to cause electric shock when touching the electric wire explosion of the battery. with wet hands. When pulling out the electric wire, hold the electric wire head rightly to pull out the wire. Don’t pull off the electric wire directly.
charging. Preliminary Acquaintance with Infrared Thermal Imager You may feel scorching heat when the hands touch the sensors. For a long time, infrared thermal imaging detection technology has become The product temperature may increase after a long time of an important means to ensure Industrial safety in developed countries.
Overview Cleaning of the Products This product is an infrared camera that integrates surface temperature Please use damp cloth or weak soap to clean the enclosure of the device. measurement and real-time thermal image. The traditional inferred Don’t use abradant, isopropanol or solvent to clean.
Charging of the Battery and Description Use USB data line to charge: Performance Index Model HT-A8 HT-A9 The product has built-in chargeable 26650 lithium batteries. Display screen 3.5-inch full-view TFT display 3.5-inch full-view TFT display Infrared image resolution 220×160 320×240 Visible image resolution 300000pixel 300000pixel LCD resolution 640×480 640×480 Field angle 35°×27° 56°×42° Thermal sensitivity đ Frame rate of thermal images 9Hz Focus mode Fixed greatest extent.
Product Description Storage capacity Built-in 8G (Actually available 6.6G) File format JPG USB Micro USB 2.0 Power supply Built-in chargeable 26650 battery Detachable Working time 3-4 hours Setting command Unit、language、date、time、information Language English、Chinese、Italian、German Automatic power-off time Selectable: 5 minutes/20 minutes/ not power off automatically Product size 256mm×97.2mm×128.
2. Display Description Micro 86% WiFi Please open the cap in use Visible light camera Current emissivity Central point temperature The highest temperature cursor Battery power The lowest temperature cursor Infrared imaging sensor Temperature cursor at central point Color code Time Image capture key Maximum value/minimum value of field temperature Color code: used to mark the color corresponding to the relative temperature from low to high in the field of version.
The lowest temperature cursor: used to indicate the lowest temperature LCD screen display position in the screen area. It will move with the movement of the lowest temperature. The cursor displays red. The temperature value is displayed at After turning on the power, the screen shows the thermal imaging the central position of the screen. status. Note: 3. Key description Time adjustment may be required when you move the camera between environments with widely varying ambient temperatures.
Introduction to the Menu The function to hide highest/lowest temperature column at the screen bottom Press the left of “ /MENU” key and the menu bar appears. They are “Image overlapping”, “Image”, “Color palette”, “Emissivity” and “Setting” under the operation after normal start up, press “ ” key and the submenus. screen bottom will display highest/lowest temperature column. Press “ ” can also hide it. 1.“Image Overlapping” Submenu Image output 1.1.
2.2. Delete Images 2. Introduction to “Image” Sub-menu While viewing the image, press the “ 2.1. View Image / MENU” button to enter the main menu, and select Press the “ “ ” button, the screen will display “Delete photo?” Select "Yes" or "No" to delete the image, press the ” (image) in the main menu. " "" " button to Switch the selection, then press the “SELECT/ENTER” button to confirm.When the image is deleted, “No Image” will be displayed.
4. Introduction to “Emissivity” Sub-menu 4.1. Emissivity Description Rainbow Iron oxide red Cold color White heat Black heat The emissivity of the product can be adjusted from 0.01 to 1.00 with the default value of 0.95. Many common objects and materials (such as timber, water, skin and textile fabric) can reflect the heat energy 3.2. Application of Color Palette effectively. So it is easy to obtain relatively correct measurement value. The emissivity is usually set as 0.
4.2. Emissivity Setting As shown in the figure, press “ The product is provided with four types of object measurement modes: Coarse object (0.95) and select “ ” key to enter the emissivity list. Press “ Semi-matte object (0.85) / MENU” key to enter the main menu ”(emissivity) option and press “ ” and “ ” keys in navigation key to select the emissivity. Then press “ SELECT/ENTER” key to determine selection Semi-shiny object (0.60) of the emissivity. Press “ Shiny object (0.
4.3. The Emissivity Value of Common Materials Substance Thermal radiation Substance Thermal radiation 5. Introduction to “Setting” Sub-menu Press “ /MENU” key to select the “ menu. Press “ Bitumen 0.90~0.98 Black cloth 0.98 Concrete 0.94 Human skin 0.98 Cement 0.96 Foam 0.75~0.80 Sand 0.90 Charcoal dust 0.96 Earth 0.92~0.96 Paint 0.80~0.95 Water 0.92~0.96 Matte paint 0.97 Ice 0.96~0.98 Black rubber 0.94 Snow 0.83 Plastic 0.85~0.95 Glass 0.90~0.95 Timber 0.
5.1. Auto Shutdown Setting 5.6. Time Setting / MENU" (automatic After entering the "Settings" sub-menu, select " shutdown), press navigationThe “ ” button in the button enters the auto power off setting. Can be set to not automatically shut down or 5 As shown in the figure, after selecting “ points The clock is turned off or turned off in 20 minutes. ?KGX ” (brightness), press the “ ” 9KZ ZOSK 5.2.
5.7. Enable/Disable of the Highest and Lowest Temperature Cursor As shown in the figure, after selecting “ “ 5.8. Wireless WIFI on and off As shown in the figure, after selecting “ ” (cold hotspot), press the ” button in the navigation key to enter the cold hotspot setting. ” (WiFi), press the “ button in the navigation key to enter the WIFI setting. 35i 35i =O,O 9VUZ 5LL 5LL 5T 5T Press “ ” /“ ” key to select “enable” or “disable” the option.
After enabling WIFI, use the mobile device to search for WIFI. The hotspot Click “Image” in the mobile device to enter the image view, press the image name is ThermalCamera-xxxxxx (xxxxxx is the last six digits of the MAC); to download the image, long press the image to save to the mobile device, access the device through the IP address 192.168.230.1.
The following conditions are not within the warranty scope: Troubleshooting 1. Unable to show the original of effective warranty voucher. If you encounter with any problem when using the thermal image device, 2. The product installation does not comply with product requirements and please use the following table for repair.If the problems are not solved, relevant specification, which causes damage; please cut off the power supply and contact with the manufacturer. 3.
FCC Caution. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
