Installation Manual

Drive software please copy the link below to your browser to get：
https://drive.google.com/file/d/1YObJGEDnUm1ZE9ZLV9Gvate6XVyUlX-
g/view?usp=sharing
Due to the early adaptation reasons, more complicated operations are required
in the early stage.
Please read the operation instructions below carefully before proceeding.
If you encounter any problems, please consult us！
Operation method:
1. The keyboard is connected to the computer via a USB cable
2. Select "Old version program 61-key RGB optical axis Dual Mode.exe", double-
click to open it, and click the button.
When upgrading, the progress bar scrolls to one-third of the time, please
unplug the USB cable immediately. This is the artificial reason for the failure
of the upgrade.
3. Close the upgrade software window, reinsert the keyboard USB cable, and then
open the "new version of GK8030_61 key"
RGB optical axis dual-mode_with_test_V1.04_210225_1.exe", click the upgrade
button until the upgrade is successful.
4. After the upgrade is successful, close the upgrade software window. The
keyboard is in the factory test mode, press FN + ESC at the same time to exit
the test mode, the keyboard can be used normally.
5. Install the computer driver software "Geekd Reflex V1.00n (driver reference
installation package)", after installation, the keyboard can use the driver in
wired mode.
6. Open the software, select the corresponding key, select the keyboard, you
can customize the functions you want.