: MORPH LAMP I INSTRUCTIONS US, Patton Ho. 5.984.422 IMPORTANT SAFETY INSTRUCTIONS using an electrical lance, basic precautions should always be followed, including the following: Read aif on act appear: (this appliance). y 8 na DANGER * Ta reduce the risk of electric shock, Always unplug this appliance from the electrical outlet before cleaning. WARNING ™ To reduce the risk of bums, fire, electric shock, or injury to persons: 1. Fireplug from outlet before putting on or off parts, ! ay 2.
‘Now, to insert the Black Light Bulb, slide one end of the bulb into the outward facing slot at the bottom of the Morph Lamp il {see Figures Now slide the other end of the Black Light Bulb into the outward facing slot at the top of the Morph Lamp § (see Figure 6). Now gently twist the bulb from both ends 174 turn to lock the bulb in place (see Figure 7). Lore § Figure 6 = Now gently take the fabric and carefully pull it towards the top of the Morph Lamp If, and up and over the top square rim of the lamp.
’ ’ MODE D'EMPLOI DE MORPHE LAMPE Ii Brevet EL), No. 5,984,482 INSTRUCTIONS DE SÉCURITÉ IMPORTANTES L'utilisation de tout appareil Électrique demande des précautions élémentaires, y compris la suivante : Lire toutes les in: ions avant Complot {de cet appareil) : DANGER * fin de réduire Jes risques de choc Électrique : Débranchez toujours Appareiller de fa prise de courant avant de fe nettoyer. AVERTISSEMENT : tn co récurâtes scientiste do bordure, licencier, chois électriques ou blessures : 1.
Maintenant, pour insérer la Lampe de Lumière Noire, caltes glisser une extrémités de fa rampe dans la fente du coté externa au bas de votre Morphe Camp Ii (vole Figure 8). Faites alors glisser autre extrémité de fa Lampe de Lumière Noire dans Ia fente du cbt externe en haut de votre Morphe Camp Hf {voir Figure 6), Tournez alors doucement les deux extrémités de la camps d'1/4 de tour pour la fixer en place. (voir Figure 7).
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B ISM equipment, pursuant to Part 18 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.