Safety Information Guide
Safety Information supply unit. Other usages may be dangerous and will invalidate any approval given to this product. The topics in this section will introduce the safety and use information. Safety precautions for proper grounding installation Please read before proceeding THE BATTERY IS NOT FULLY CHARGED WHEN YOU TAKE IT OUT OF THE BOX. DO NOT ATTEMPT TO REMOVE THE BATTERY PACK.
power source required, consult your authorized service provider or local power company. For a product that operates from battery power or other sources, refer to the operating instructions that are included with the product. This product should be operated only with the following designated power supply unit(s). To reduce the risk of fire or burns, do not disassemble, crush, puncture, short external contacts, expose to temperature above 113°F (45°C), or dispose of in fire or water.
• Device usage supervised. by children should • Only use the battery for the system for which it is specified. • Only use the battery with a charging system that has been qualified with the system per CTIA Certification Requirement for Battery System Compliance to IEEE1725. The use of an unqualified battery or charger may present a risk of fire, explosion, leakage, or other hazards. • Promptly dispose of used batteries in accordance with local regulations. • Avoid dropping the phone.
Safety in aircraft Due to possible interference caused by this product to an aircraft's navigation system and its communications network, using this device's phone function on board an airplane is against the law in most countries. If you want to use this device when on board an aircraft, remember to turn off the RF on your phone by switching to Airplane Mode.
• Avoid using your phone near strong electromagnetic sources, such as microwave ovens, sound speakers, TV, and radio. • Use only original manufacturer-approved accessories or accessories that do not contain any metal. • Use of non-original manufacturer-approved accessories may violate your local RF exposure guidelines and should be avoided. Interference with medical equipment functions This product may cause medical equipment to malfunction.
Avoiding contact with the antenna area when the phone is IN USE optimizes the antenna performance and the battery life. Electrical safety Accessories • Use only approved accessories. • Do not connect with incompatible products or accessories. Connection to a car Seek professional advice when connecting a phone interface to the vehicle electrical system. Faulty and damaged products • Do not attempt to disassemble the phone or its accessories.
Heed service markings • Except as explained elsewhere in the Operating or Service documentation, do not service any product yourself. Service needed on components inside the device should be done by an authorized service technician or provider. Do not attempt to disassemble your phone or its accessories. Only authorized personnel must do so. • Do not expose your phone or its accessories to extreme temperatures, minimum 14°F (-10°C) and maximum 113°F (45°C).
Avoid hot areas Avoid pushing objects into the product The product should be placed away from heat sources such as radiators, heat registers, stoves, or any devices producing heat. Never push objects of any kind into cabinet slots or other openings in the product. Slots and openings are provided for ventilation. These openings must not be blocked or covered. Avoid wet areas Airbags Never use the product in a wet location.
Adjust the volume • Press the buttons lightly. Turn down the volume before using headphones or other audio devices. • Make use of the special features in the handset which minimize the number of buttons which have to be pressed, such as message templates and predictive text. • Take lots of breaks to stretch and relax. Cleaning Unplug the product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.
FCC Regulations This mobile phone complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This mobile phone has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Although the SAR is determined at the highest certified power level, the actual SAR level of the phone while operating can be well below the maximum value. This is because the phone is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station, the lower the power output. The highest SAR value for the model phone as reported to the FCC when tested for use at the ear is 1.
Hoyos Integrity Corporation 1975 E. Sunrise Blvd., Suite 400 Ft. Lauderdale, FL 33304 www.HoyosIntegrity.
