Dual-HD Wireless IP Camera Quick User Guide Family use Stores use Indoor use For more information, please visit our online website http://www.cam158.
Quick start guide 1. Download and install the application A. Make sure your mobile device is properly connected to the network. B. Search and download "BlueCam" in Google Play or the App Store. Android iOS 2.Check the wireless network environment Enable the router's DHCP functionality and ensure that it works under 2.4ghz.(5GHz is not supported by Device) Make sure your smartphone is connected to your router. 3.
Step 4: enter the wireless password and then click "connect WIFI" (figure 4); Step 5: click "start" and wait for 30S.(figure 5); Step 6: On the code completion interface, find the device to add and click the add button (figure 6). Step 7: Find the device already added on the device list page, and the device is displayed online (figure 7); Step 8: click the play button, the security tips will pop up, and click ok to enter into the user settings page (figure 8).
figure3 figure7 figure4 figure5
figure6 figure9 figure8
If there is no device on the code success page, go back to step 2 and re-configure the device. Reset button: Press "reset" button for 5 seconds and the device will reboot (you can hear "reset success") and it will automatically revert to factory settings. So you need to make a wifi setup again after reboot. Note: when you try to reset the device, make sure it is powered on.
Method 2: AP (hotspot) connection (the connection mode is applicable to QJ series, WJ series products) Step 1: open the phone Settings, select WLAN Settings, search the wireless webcam ID, and the wifi camera ID prefix is: HOW - etc.
figure1 figure3 figure2 figure4
figure5 figure7 figure6 figure8
figure9 figure11 figure10
4. Look at these video settings and we'll take a smartphone for example.
FCC statement This device complies with Part 15 of the FCC Rules: Operation is subject to the following two conditions: 1. This device may not cause harmful interference and 2. This device must accept any interference that is received, including any interfer ence that may cause undesired operation. RF exposure warning : This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
