3 16 Operating the Tablet Using the Pop-Out Keyboard The Pilot X tablet will connect to the podium’s Pop-Out Keyboard when docked on the Magnetic Tablet Dock. To deploy the keyboard, simply push-in on its front edge and it will automatically extend. To retract, gently push it back into the unit until it locks into place. Using the Digital Keyboard When using the tablet independent of the Magnetic Tablet Dock, the digital keyboard must be used for any typing input.
13 17 Document Camera The Pilot X tablet comes equipped with a Fold-Out Document Camera. The document camera can be used as a lesson recorder, scanner, webcam, live annotation tool, microscope, show-and-tell device, audio recorder, video logger, and much more. For optimal functionality, use the included Flex 11 or ClassFusion softwares (page 18) to operate the document camera. Camera specifications are as follows: Camera Sensor 13.
13 18 Document Camera Software The tablet comes with two document software programs preinstalled: ClassFusion and Flex 11. Notice: ClassFusion may not be installed on all models. Contact HoverCam Technical support for more information. ClassFusion is comprehensive learning management ecosystem that includes an interactive whiteboard, lesson building and presentation tools (including document camera software), a large lesson plan catalog, full day lesson recording, formative assessment tools, and much more.
13 19 Connecting to a Display - HoverCast HoverCast Wireless HDMI Pilot X comes equipped with state-of-the-art wireless interactive casting technology called HoverCast. Using the HoverCast Receiver, Pilot X is capable of casting a high definition HDMI image to any interactive flat panel, projector or other output display with an HDMI input. Unlike other wireless casting technologies, HoverCast has virtually no loss in image clarity and no noticeable delay.
13 20 Connecting to a Display - HoverCast HoverCast works best when the tablet’s HoverCast Wireless Antenna is directly facing the HoverCast Wireless Receiver (which will be placed near the output display). For boosted reception, you can angle the tablet’s HoverCast Wireless Antenna forwards by 20º. Increasing the tilt angle of the radio signal can potentially increase signal strength. When unobstructed, the tested range for the HoverCast receiver is over 100 feet.
3 21 Connecting to a Display - HoverCast HoverCast Set-Up While there is no software to set up or passwords to enter, the right steps must be followed in the set-up process to enjoy the benefits of wireless HoverCast technology. 1 Install the Receiver: Install the HoverCast Wireless Receiver on or near the intended output display by hand-tightening the retention nut clockwise until the the unit is secure.
13 22 Connecting to a Display - HoverCast 5 Power-On the System: Switch on the Pilot X Tablet via the Tablet Sleep/Wake Button and switch on your output display, making sure the corresponding HDMI input is selected. Next, power on the tablet’s HoverCast Wireless Antenna via the HoverCast On/Off Switch. Finally, power on the HoverCast Wireless Receiver by pressing the power button on the back of the receiver.
13 23 HoverCast Positioning Guide The HoverCast Wireless Receiver’s front must face outwards, towards the receiver and away from any walls or cavities. Make sure the HoverCast Wireless receiver is not mounted backwards. The front of the receiver should face wherever the tablet will be used most frequently. Front of HoverCast Wireless Receiver Front of Display Rear of HoverCast Wireless Receiver Front of Display The HoverCast signal is strongest when the antenna and receiver maintain line-of-sight.
13 24 HoverCast Positioning Guide Be sure to mount the HoverCast Wireless Receiver facing away from walls, and in plain sight. When using with a ceiling-mounted projector, make sure the front of the HoverCast Wireless Receiver is directed downward towards the antenna. Use zip-ties or adhesive to secure the receiver to the underside of mounted projectors. While placing the HoverCast Wireless Receiver in low places isn’t ideal, it still must be placed within line-of -sight of the antenna when doing so.
13 25 HoverCast Positioning Guide Standing behind the Tablet’s HoverCast Wireless Antenna will allow for maximum line of sight with the HoverCast Wireless Receiver. Standing in front of the Tablet’s HoverCast Wireless Antenna can cause signal-drop. Do not stand between antenna and receiver. Mount the HoverCast Wireless Receiver as high as possible to maximize line of sight and minimize chances of signal interruption.
13 26 Connecting to A Display - Wired The Pilot X Tablet can output to an external display using a Type-A to Type-C (Mini) HDMI cable (not included). Simply connect the display to the Pilot X Tablet’s Type-C (Mini) HDMI-Out on the left side of the Pilot with an HDCP-compatible Type-C (Mini) to Type-A HDMI cable. When used with an interactive display, a USB 2.0 Type A cable can be used to connect the Pilot X Tablet to an interactive display’s Touch-USB port. Type-A USB 2.
13 27 Audio Output There are several options for outputting audio from the Pilot X Tablet: Built-In Speakers (default) By default, the Pilot X Tablet outputs audio through its internal speakers. In the Windows® playback device list, the tablet’s internal speakers should be listed as “Realtek High Definition Audio.” Output Display’s Speakers When using HoverCast or the HDMI-Out to connect to an external display with speakers, audio can output through the external display’s speakers.
28 Audio Output Tablet Audio Line In/Out (wired) The Pilot X Tablet features an Audio Line In/Out that can be found on the left side of the tablet. Simply connect the Pilot X Tablet to an external audio system with a 3.5mm auxiliary cable. Podium Audio Line In/Out (wired) The Pilot X Podium also features a 3.5mm Audio Line In/Out that can be used when the Pilot X Tablet is placed on the Magnetic Tablet Dock.
Audio Input 13 29 There are several options for inputting audio to the Pilot X Tablet: Built-In Microphone (default) The Pilot X Tablet features two internal microphones (left and right oriented) that are set as the default audioinput source. They will appear as “Realtek High Definition Audio” as an import source within Window’s settings. For detailed instructions on connecting and selecting audio input devices, refer to the full Windows® manual: www.windows10-guide.
13 30 Specifications Internal PC Operating System Microsoft® Windows® 10 64-bit (license not included) Processor Intel® Core™ M3-7Y30 Display Adapter Intel® HD Graphics 615 Storage 128GB SSD Memory 8GB DDR RAM Touch Display Display Touch Panel Stylus Compatibility 13.3 inch LCD Preliminary Notice All features and specifications are subject to change without notice.
13 31 Service and Support Cleaning and Care When cleaning the HoverCam Pilot X, extra care should be given to the touch screen and external components. Glass cleaners are not advised as the moisture may damage or adversely affect touch sensitivity or component functionality. Do not directly spray any liquids (chemicals or water) onto the product. Instead, apply cleaning compounds on a dry microfiber cloth and gently clean sealed surfaces while the unit is powered off and unplugged.
Warranty Limited Warranty: Subject to the terms and conditions set forth below, HoverCam (“HoverCam”) warrants the HoverCam Pilot X – Wireless Digital Teaching Station (“Product”), you have purchased from HoverCam or from a HoverCam authorized reseller/retailer to be free from defects in materials or workmanship under normal consumer use during the warranty period in the continental United States.
Warranty Exclusions This limited warranty does not extend to any Product not purchased from a HoverCam authorized reseller.
Safety Warnings Power Cords, Power Adapters, Extension Cables, Electrical Outlets WARNING: Use only the power cords and power adapters supplied by the product manufacturer. The power cords shall be safety approved. Never wrap a power cord around a power adapter or other object. Doing so can stress the cord in ways that can cause the cord to fray, crack, or crimp. This can present a safety hazard. Always route power cords so that they will not be walked on, tripped over, or pinched by objects.
Safety Warnings Only recharge the battery strictly according to instructions included in the product documentation. Batteries supplied by HoverCam for use with your product have been tested for compatibility and should only be replaced with approved parts. A battery other than the one specified by HoverCam, or a disassembled or modified battery is not covered by the warranty. Battery abuse or mishandling can cause overheat, liquid leakage, or an explosion.
Safety Warnings Electrical current safety information WARNING: Electric current from power, telephone, and communication cables is hazardous. To avoid a shock hazard: • Do not use your product during a lightning storm. • Do not connect or disconnect any cables or perform installation, maintenance, or reconfiguration of this product during an electrical storm. • Connect all power cords to a properly wired and grounded electrical outlet.
Notices HoverCam may not offer the products, services, or features discussed in this document in all countries. Consult your local HoverCam representative for information on the products and services currently available in your area. Any reference to a HoverCam product, program, or service is not intended to state or imply that only that HoverCam product, program, or service may be used.
13 38 Legal Trademarks HoverCam is a trademark of Pathway Innovations & Technologies in the United States, other countries, or both. Microsoft and Windows are trademarks of the Microsoft group of companies. The terms HDMI and HDMI High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. Wi-Fi and Wi-Fi Alliance are registered trademarks of Wi-Fi Alliance. USB-C is a trademark of USB Implementers Forum.
Pilot X™ Designed by HoverCam in sunny San Diego, California (858) 750-3499 sales@hovercam.com © Copyright HoverCam® 2019 Pathway Innovations & Technologies, LLC 9985 Pacific Heights Blvd.
)&& 6WDWHPHQW 7KLV HTXLSPHQW KDV EHHQ WHVWHG DQG IRXQG WR FRPSO\ ZLWK WKH OLPLWV IRU D &ODVV % GLJLWDO GHYLFH SXUVXDQW WR SDUW RI WKH )&& UXOHV 7KHVH OLPLWV DUH GHVLJQHG WR SURYLGH UHDVRQDEOH SURWHFWLRQ DJDLQVW KDUPIXO LQWHUIHUHQFH LQ D UHVLGHQWLDO LQVWDOODWLRQ 7KLV HTXLSPHQW JHQHUDWHV XVHV DQG FDQ UDGLDWH UDGLR IUHTXHQF\ HQHUJ\ DQG LI QRW LQVWDOOHG DQG XVHG LQ DFFRUGDQFH ZLWK WKH LQVWUXFWLRQV PD\ FDXVH KDUPIXO LQWHUIHUHQFH WR UDGLR FRPPXQLFDWLRQV +RZHYHU WKHUH