www.hover-1.
MY FIRST FORKLIFT
MY FIRST FORKLIFT Operation O ti Manual M l H1-FLFT H1 FLFT IMPORTANT: KEEP FOR FUTURE REFERENCE *Images used in this manual may vary slightly from the product and are for reference purposes only. It is important for you and every rider to read this manual before using this product.
WARNING HELMETS SAVE LIVES! Always wear a properly fitted helmet that complies with CPSC or CE safety standards when you ride your vechicle. Incorrect Fitting: Forehead is exposed and vulnerable to serious injury. Correct Fitting: Make sure your helmet covers your forehead.
INTRODUCTION This manual is designed to give you the information you need for the safe operation and maintenance of your new Hover-1 My First Forklift. Please read it thoroughly before riding your Hover-1 My First Forklift.
HOVER-1 MY FIRST FORKLIFT DIAGRAM 1. Front Fork 2. Fork Frame 3. Front Fork Link 4. Front Fork Lifting 5. Lever 6. Headlights 7. Roof 8. Chair 9. Support Frame 10. Trunk Lid 11. Door 12. Rear Wheel 13. Steering Wheel 14. Front Wheel 7 6 8 9 5 10 11 4 3 12 2 13 1 14 SPECIFICATIONS Battery 12V 10AH Dimensions 57.5” x 24.8” x 39.8” (146 x 63 x 101 cm) Brushless Motor Drive 12V / 40W x2 (12V/20W x2) Speed 3 mph (4.
PARTS LIST (1) Front Fork Link (2) Front Wheels Drive Gear (4) Wheel Cover (2) Rear Wheels (1) Support Frame (Optional) (1) Charging Cable (1) Lower Frame Assembly (Optional) (1) Remote Control (1) Steering Wheel (2) Levers Please visit www.hover-1.
PARTS LIST (1) Body (1) Front Fork Lifter (1) Roof (1) Fork Frame (1) Trunk (1) Toy Pallet (1) Trunk (1) Seat (2) Front Forks Please visit www.hover-1.
& MAINTENANCE ASSEMBLING YOUR HOVER-1 MY FIRST CARE FORKLIFT x2 x2 7
ASSEMBLING YOUR HOVER-1 MY FIRST FORKLIFT A x6 x4 B 8 C
& MAINTENANCE ASSEMBLING YOUR HOVER-1 MY FIRST CARE FORKLIFT x2 x2 9
& MAINTENANCE ASSEMBLING YOUR HOVER-1 MY FIRST CARE FORKLIFT 10
& MAINTENANCE ASSEMBLING YOUR HOVER-1 MY FIRST CARE FORKLIFT x6 11
& MAINTENANCE ASSEMBLING YOUR HOVER-1 MY FIRST CARE FORKLIFT x4 12
& MAINTENANCE ASSEMBLING YOUR HOVER-1 MY FIRST CARE FORKLIFT 13
STEERING WHEEL & REMOTE CONTROL 1 2 3 4 4 5 7 7 8 2 10 6 9 8 5 3 1 6 PAIR REMOTE TO FORKLIFT If the remote is not pairing to the forklift, follow these instructions 1. Turn off the Forklift and remove the batteries from the remote. Put batteries back into the remote. 2. Press and hold the code button on the remote while turning on the forklift. 3. When the remote begins to flash, release the code button.
RIDING YOUR HOVER-1 MY FIRST FORKLIFT Ensure your Hover-1 My First Forklift is fully assembled and correctly installed with screws secured tightly in place. Failure to do so may result in serious bodily harm/death and damage to the vehicle. After reviewing the pre-ride checklist, follow the steps below to begin riding your Hover-1 My First Forklift. 1. Turn on your vehicle by pressing the power button. 2. Sit in Hover-1 My First Forklift and place feet onto foot rests. 3.
CARE & MAINTENANCE • Only use the charger and battery specified by the manufacturer. • Before charging,check the charger, battery and plug for any damage. If anything is damaged, stop using the vehicle until it is repaired. • Do not turn the vehicle on while charging and don’t turn the battery upside down • While charging, the charger will warm up. If the charger does not warm up, the charger, battery or circuit may have failed. 1.
CARE & MAINTENANCE CONTINUED 5 Vehicles should be kept away from direct heat, such as furnaces and heaters. Plastic parts may melt. When charging, keep away from flammable materials to prevent fire. 6. Charge the battery immediately after use. The charging must be done by adults. Fully charge the battery before storing away for extended periods of time. Pull out the red main line and charge once a month to prolong the battery life. 7.
PRE-RIDE HOVER-1 MY FIRST FORKLIFT CHECKLIST Ensure that your Hover-1 My First Forklift is in proper working order each and every time you ride. If a part of the Hover-1 My First Forklift does not function correctly, please contact our Customer Support Center. • Ensure the battery of your vehicle is fully charged before riding your Hover-1 My First Forklift. • Ensure that the screws on the Hover-1 My First Forklift wheels are locked firmly before each ride.
HOVER-1 MY FIRST FORKLIFT WARNINGS 1. When operating the vehicle remotely, the distance between children and adults should not exceed 33 feet. 2. The remote control is meant to be used by adults only. Keep out of reach of children. 3. Before operating the vehicle by remote control read the manual carefully. Practice using the remote control with the vehicle empty. Only after getting familiar with the controls should a child ride in the vehicle. 4. Keep off of public roads.
BEFORE RIDING WARNING Any vehicle that does not work properly can cause you to lose control and fall. Inspect the entire forklift thoroughly before every ride, and do not ride it until any problems have been corrected. WARNING Do not ride a Hover-1 My First Forklift with a part that is damaged; replace the damaged part before riding.
1. It is strictly forbidden to use this product on roads and highways, unless your local laws state otherwise. You must wear a safety helmet, knee and elbow pads and other necessary protective gear when riding your Hover-1 My First Forklift. 2. Due to the particularity of the product, the assembly pieces are to be checked before every ride to avoid an accident while riding. 3.
FCC STATEMENT This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Please note that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
WARRANTY For warranty information, Please visit us at: www.hover-1.com Replacement parts may be available for purchase at www.hover-1.com. Parts availability is not guaranteed. Manufacturer: DGL Group, Ltd.