Operating Instruction Model: EM-JA019 Rev 0 Bluetooth Bookshelf Speakers
Important Safety Instructions 1. Read these instructions – All the safety and operating instructions should be read before this product is operated. 2. Keep these instructions–The safety and operating instructions should be retained for future reference. 3. Heed all warnings–All warnings on the appliance and in the operating instructions should be adhered to. 4. Follow all instructions – All operating and use instructions should be followed. 5.
apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall not be placed on apparatus. 17. The use of the equipment in moderate climate. 18. The ventilation should not be impeded by covering the ventilation openings with items such as, newspapers, tablecloths, curtains, etc. 19. No naked flame sources, such as lighted candles, should be placed on the apparatus. 20. The symbol with indicate AC voltage. 21. The symbol with indicate DC voltage. 22.
Before Use： The equipment consists of two speakers. One is the right speaker, which is powered by a built-in rechargeable lithium battery; If the battery is depleted, the lithium battery can be charged via a USB cable. This speaker is slave device. The other is the left speaker, which is powered by a power adapter. Connect the mains adaptor to DC IN 15.0V 0.8A socket on the back of the radio.
Powering On the master speaker Use the supplied mains adaptor to connect to the DC IN socket at the back of the unit and insert the plug into your household outlet. The red power indicator lights up, voice prompt “POWER ON”, device power on. Note: Check the rating plate on the AC/DC adapter with your mains power voltage before powering the speaker on. 2. After 5 minutes without any operation, the speaker will automatically turn off the power. Powering On the slave speaker 1. A 7.
will memory the last time setting. Adjusted to the maximum volume, there will be a prompt tone. 6. Long press VOL + or VOL - for 2 seconds it for the Next/previous track 7. Short press Bluetooth button music play/pause 8. Long Press Bluetooth button & VOL- together for 2 seconds, disconnect current Bluetooth paired device and enter into Bluetooth pairing mode, blue indicator flash.
NOTE: Long press Bluetooth & VOL- for 2S disconnect current TWS paired, enter BT pairing mode If no TWS device paired, after for 5 minutes, it will auto power off Before carrying out TWS networking, the Bluetooth connection of the speaker must be disconnected. After successful networking, the pair can be matched again 4. Turn on the Bluetooth function on your external device NOTE: The effective distance between your external device and this speaker is 10 meters (33ft.) 5.
Language selection Long press BT Button & VOL+ together last for 2S for language selection Restore factory setting Long press BT Button & VOL+ together last for 10S for restore factory setting.
Specifications The right speaker (The slave device) Power supply: AC/DC Adapter: Manufacturer: SHENZHEN AQUILSTAR TECHNOLOGY CO.。 ，LTD. Model No.: ASSA107w-050200 Input: 100-240V~50/60Hz Output 5.0V 2.0A Built-in rechargeable lithium battery：7.2V/5200mA Micro USB port for charging battery: 5V, 2.0A Speaker Output power：1x 10W RMS; Bluetooth version: 5.
FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
