Caution : You must read this before you proceed Table Picture Label Picture Description QTY A Table 1 B Legs 4 Page 1 of 8
Label Picture Description QTY ① Bolt 9 ② Spring Washer 9 ③ Washer 9 ④ Allen Key 1 ⑤ Screwdriver (not provided) 1 Before Beginning Assembly: Page 2 of 8
Before Beginning Assembly: Overview Table Top (A) Leg (B) This Table has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the End Table parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Step 1 Turn the carton over, open the carton, there will be 3pcs of styrofoam. Remove the styrofoam and you will see the Legs. Take the Legs out and place them on a clean, non-marring surface. With help from an adult partner, pull the Table(A) out carefully, and place it facedown on a clean, non-marring surface.
Step 2 Insert the Leg(B) into the mounting position in the Table(A). Attach Leg(B) to Table(A) using Bolts(①), Spring Washers(②), and Washers(③) with Alley Key(④). Do not fully tighten the Bolts. Repeat this process with the remaining three Legs(B). Step 3 3.1 3.
With the help of your adult partner, carefully stand the Table up. 3.1) Pull out the Drawers and disassemble the Handles with Screwdriver(⑤). 3.2) Install the Handles on the Drawers with Screwdriver(⑤) as pictured above. Note: Glass is fragile, Please do NOT over tighten the Handles as this may crack the glass. Step 4 Place Table on a level surface, to check for wobbles. If there are wobbles, press firmly down on the Table with your hands. This process should remove any gaps at any joints.
WARNING Serious or fatal crushing injuries can occur from tipping furniture. To help prevent tip-over: ALWAYS secure this furniture to the wall using Restraint Device. See product instructions for more ways to help prevent furniture tip-over. Usage for Restraint Device: Move the Table against the wall, Pull out the Restraint Device Straps from the product, use screw driver to lock the strap with a screw on the wall. The screw and screw driver is NOT included.
Page 8 of 8